12.30pm like that
yalor... i need $, very poor now.
at nite no good.. no car but polis a lot. early morning is good, no car and polis still pigging.
haha, i sure aim >100kph la. At least I can reach 170kph on GPS   0 - 80 no fight with RGV.
teluk bahang la..

wah.. 170 kph on gps? i ma die..=.= mine only 140 on gps okay...=.=

haha, tat one another day.. now I think of it, lunch time quite a lot of car, perhaps bayan lepas there less.
140 gps on RGV is very good ady. I doubt my LC can go 140

in front of intel actually no car. very short distance, good for 0 to 100 testing 
Dont bully my kelisa ler... its stock engine nia... 

what bouttt meeee~~~haha

no license..hahaha. i dunno where lai..=.=

i dun even know where is tesco..haha.. charge. i got no car license but got motor.

i forgot how to go d..HAHAHA. i know go queensbay lo

walao! kelvin.. u dunno how to go tesco..? u mau kena pukul butt ar..? *smack smack!

u exit penang bridge.. don exit queensbay road.. exit the straight wan.. u remember that time we go interact wan..? then darvin bring until engine mati.. we wait at the side of the road there..? go in front more.. is Caltex with Tesco there.. E-gate u tak tau..?? u go in front got Caltex.. i can assure u.. i sunday not free.. unless wan my mother to smack my butt.. LOL

about this valve head ar.. i see the valve.. like kena some porting already... dunno ori wan or not... i think ori wont do this kind of stuff wan..

and if no porting.. the valve head there shud be cleaner and without any little scar.. if its ori la..

this only suitable for mod engine...cause stock bore.. got too much fuel also not good ma.. haha..too rich..

this is ori valve head VS big valve head

i know can... but ar.. full tank.. later their speed is fast wan.. then fuel eat a lot or little i also dunno geh..later really halfway engine mati.. LMFAO!

here only for 135lc bikers?

I mau join tt if its next month. Haha. But. I'll be the one refuelling the most. =P

Ok... let's get more ppl go TT highway, better also.

@zelk and Spayz, this month we do Teluk Bahang ok?
@Bizzy: we join your group on this one?

if u planning sport rim.. ur bike will become heavy..and if to compensate that.. u need smaller size tyre.. then ur now wan MPS go to waste.

change better and lighter alloy rim.. tyre wont go to waste.. and bike more light la.. =)

like that lo.. ur money too much ade.. don use too much on bike.. use for urself..bike will degrade value..

u see jeff wan rim bengkok also he don care.. he just ride.. ur rim n stuff still ok.. u ade hand gatal wanna do something.. LOL

---

Added on September 21, 2010, 12:18 am
inside the meter got KPH la.. u have to look nicely.. its around 160km/h in the meter..

zelk not gatal or money too much le..

he just want to consider using tubeless coz safer n stable.. summore with his bike's power now if heavier rim will make the bike more stable on corner too + he wants disc brake on front..

alloy rim is light n fast but that's all..

p.s. riders want to be the fastest but sometimes the one who is slower wins the most..

HAHAHHAHA!! zelk free boh..? follow him to JPJ.. hahah..

---

Added on September 21, 2010, 11:46 am
hey.. ur bike not heavy meh..? i tot heavy already..the head not as heavy as my head la.. but i feel is heavy liao.. mayb front go to disc brake.. then it is heavy...

---

Added on September 21, 2010, 11:49 am
thats why.. very dangerous fella..

even USA usually promotes bigger bike.. and this scooter also they promote.. haha..

engine is one of the best in the market.. hohoho...

---

Added on September 21, 2010, 11:51 am
oh!! understand... heheh.. thanks.. =)

then how bout when on certain bike, we ride time.. we need to release clutch till like 3/4.. then only bike can jalan..

and some release a little bit only..the bike jalan already.. wat is that called..? haha

http://motor-part4u.blogspot.com/2010/09/c...maha-lc135.html

same dude.. Palex Motorcycle Parts.

---

Added on September 24, 2010, 1:43 pm

this is Zelk's ex5.

0.7854 × 5.4 × 5.4 × 4.95 = 113.4cc
0.7854 is constant..

5.4 = 54.0mm bore..

4.95 = 49.5mm stroke..

this is example i get to count zelk's motor.. but shud be inaccurate..cause his stroke shud be more already..
this is LC's stock.

0.7854 × 5.4 × 5.4 × 5.87 = 134.4
P.S. if ur bike got 2 cylinder.. after u calculate the cc d.. remember to ×2. for 4 cylinder.. ×4.

example..

this is kawasaki 250r spec..

0.7854 × 6.2 × 6.2 × 4.12 = 124.4cc

then cause got 2 cylinder = 124.4 × 2 = 248.8cc
i found this site while searching.. dunno usable or not.

http://www.nightrider.com/biketech/calc_displacement.htm

---

Added on September 24, 2010, 1:56 pmi check ade.. the site is very easy to use.. just key in ur bore and stroke straight.. and set it to mm instead of inches.. then direct press calculate.. haha..

but if u wan calculate urself.. just use the formula i gave u.. =)

haha... siao liao.. tomoro i going my college talk.. ppl from Osram coming to give speech.. haha..

last few months ago.. i din go for another talk.. Lim Guan Eng was there.. LOL

Another successful TT session in Penang: Nice weather, enjoyable ride, and all went well...

wat u mean? Which bike alex bring? Haha..today weather is nice. I can see that. But now mainland raining nia. Lol

---

Added on September 25, 2010, 5:20 pmzelk. How is ur fc? Better?