Any Abit NF7 mobo for sale ? Need it asap.

Just got a NF7-S V2 yesterday. Now preparing all the stuff and i'll post the results later. Wish me luck.

Currently burning it at 2.2ghz at 1.625v. Temps are 42c full load in the morning and 46c load in the afternoon. BTW im using Storm G4 + BIX2 + Nirox P2800 since my MCP650 just spoiled. Will go to 2.3ghz this evening and 2.4ghz later on. Stepping is NIUHB bla bla bla.

Put aside Axp-M procs, 2.3 ghz at 1.675 V ? If its a barton then i think its possible but T-Bred b ? My Tbred-B 2.3ghz@ 1.775V.

Dude, where do u come from ?

This post has been edited by uzairi: Apr 30 2006, 07:04 PM

Dude, pump ur NIUHB more. Im using NIUHB too and now im clocking it at 250x9. Will go up slowly later.



This post has been edited by uzairi: May 1 2006, 12:59 AM

Weird. Maybe cpuz read it wrongly. Same case like me last time when im using epox nforce 2 ultra.

Will pump the fsb more after burning the proc and rams.
Rite now im aiming for the fsb since the highest stable clock would be 2.4ghz but the load temps are quite high which is around 49c. Mind you im using Strom G4 + BIX2 + Nirox P2800 and that temp is taken at nite whereas in the afternoon it can reach to 54c. Im not used to high temp.

1.45v @ 2.0ghz ? Are u sure ? That's undervolt and u can get 2ghz ? Weird. Will try 255mhz now.

Owh. Right now running my proc at 2.3ghz @ 1.7v. Doing 255mhz x 9. Will go higher later.



Is the bandwidth considered okay ?

Attempt to do 260mhz @ 3-4-4-11 failed. Maybe need more burning. Will post again tomorrow.

Measure ur memory bandwidth with SANDRA.

Find somebody with the same mobo and ask him to help you do a HOTFLASH.

How's the results ?

Me too.

Im using SANDRA Lite 2005 SR3.

BTW i got lower memory bandwidth with 1T compared to 2T. Even higher Vcore needed to use the same settings on 1T. Rite now using 2T back.

Come on, faster post up the benchmark. Cant wait to see your results.

Yup, using D26 Mantarays XT with cpc enabled. Wonder why. So u think i should benchmark it using 3dmark rather Sandra Memory Bandwidth test ?

Owh, so 1T or 2T it wont affect the memory bandwidth eh ? Maybe i would try that later. Confusing also lah the performance. haha.

Good, later we can compare the results.

Stock speeds wont let u see any differences at all. Try to overclock and measure the differences with 3dmark2001se and Sandra Memory bandwidth test.

Which modded bios? Any modded bios would give extra oompphss compared to stock bios. I never tried Taipan D27, still on D26 coz lazy.

Tips ? Slowly crank the fsb speed, let the proc and the ram have a sufficient burn in time. That way u can get a good results. Trust me.

Those are default for the bios. Hard to change either, just live with it. Afterall u wont be restarting ur pc more than 10 times a day. Do you ?

It depends on the motherboard. What motherboard you're using now ?

Well, u can try D26 Mantarays XT 1T, 2T and D27 Taipan. Before that learn how to flash the BIOS and what you would be getting with those rams.