Outline ·
[ Standard ] ·
Linear+
NF7/NF7-S Rev2.0 Modded Bios, : Discussions and Results :)
|
Mr_47
|
 Jul 28 2005, 02:17 PM
|
|
QUOTE(cubchai @ Jul 28 2005, 12:43 PM) when i use mantarays, memtest of RAM 180Mhz at lose timings oso cannot. i remembered before mantarays, i can do higher than 180. this weekend going to kl lor, my fren offer me his pc to hotflash. i asked around many shops in my hometown on hot flash. all shops suggested me to download bios, put in floppy and flash lor. then i told them ok ok, i will try if my pc can boot up.  floppy and flash is hard thing to do ler! better hotflash. pitty you. BTW:d26 mantarays xt 2t can give me ram 2.8v timming 2-2-2-11,,, + fsb max is 230 ,,,, before this i use stock bios can't do it.,,, and all this with rm45 450W psu. This post has been edited by Mr_47: Jul 28 2005, 02:22 PM |
|
|
|
|
|
Mr_47
|
Jul 28 2005, 02:26 PM
|
|
|
QUOTE(cubchai @ Jul 28 2005, 02:21 PM) My RAM DDR333 only. I'm not aiming for superb high FSB, 200-220, i happy liao. i bringing only the bios chip to hotflash. damn panic, if after the hotflash, bring back hometown still cant boot up. i was considering bringing the mobo along. we all here wanna wish u the best of luck.  it's a quite risky job to do. |
|
|
|
|
|
Mr_47
|
Jul 28 2005, 10:14 PM
|
|
|
QUOTE(Dead__Man @ Jul 28 2005, 07:31 PM) Is there anyway to maximize the potential of a mobo? Mine seems to max out at 225Mhz. Anything over, Prime95 fails at exactly 7 minutes. Always exactly 7 Minutes. Check my sig for my specs. Oh, and I'm using D26 Mantarays XT 2T. "vCore Fluctuation Fix" how did you do that ? BTW: try to feed your cpu with more voltage. |
|
|
|
|
|
Mr_47
|
Jul 31 2005, 12:55 AM
|
|
|
QUOTE(Radeon @ Jul 29 2005, 08:34 AM) well the apic is a long debated issue btw mr47 why your d43 can do 2-2-2 timings? when i change from stock bios to mantaray xt 2t it just does! before that cannot,,,,,, even if i feed it with 2.9V and low fsb now is okay,,,,, can do 2-2-2-11 2.8v at max stable fsb 230 x 11 .. but i just use 210 coz the temp for 230 is too high,,, reach 57+ now very happy  This post has been edited by Mr_47: Jul 31 2005, 12:56 AM |
|
|
|
|
|
Mr_47
|
Aug 1 2005, 11:14 PM
|
|
|
someone should list down how many ppl here are using moded bios and what type of it!
just extra idea to keep this thread alive.
|
|
|
|
|
|
Mr_47
|
Aug 4 2005, 11:13 AM
|
|
|
i've change back my mantarays xt 2t to 3dfire 2t coz more stable.  cooler cpu temp. not sucking too much v. get my bf2 no ctd. 3dmark 03/05 more point,,, + 50 This post has been edited by Mr_47: Aug 4 2005, 11:16 AM |
|
|
|
|
|
Mr_47
|
Aug 9 2005, 12:35 PM
|
|
|
QUOTE(ivandj @ Aug 9 2005, 08:15 AM) - ABIT-NF7D27-3DFire-1T - ABIT-NF7D27-3DFire-2T Which is better for my system ? AXP-M 2400 2*512mb KVR No hotwire mod ( L12 ) Main thing is that i only use FSB @ 200 Not trying to max things out  Enough juice for me at the moment  if your ram is doubleSided,,, then go for 2T |
|
|
|
|
|
Mr_47
|
Aug 9 2005, 09:26 PM
|
|
|
QUOTE(ivandj @ Aug 9 2005, 01:38 PM) How to flash the bios ? just use Abit's flashmenu ? just try to use it ,,, you're find it yourself,,, no worry easy only. |
|
|
|
|
|
Mr_47
|
Aug 24 2005, 08:46 PM
|
|
|
what hapen if system as my sig use 1T ?
any bad thing?
|
|
|
|
|
|
Mr_47
|
Aug 25 2005, 12:17 AM
|
|
|
QUOTE(Dead__Man @ Aug 24 2005, 10:36 PM) ^ Higher performance, but not so high FSB. even doublesided ram love 2T,,,, but also can use 1T if i want,,,? coz the limitation of my barton 2500+ is 220*11 only at 1.8V and 3-3-3-11 2.8V so i want try to use 1T coz i can't go for higher FSB anymore,,,,, heat kill my oc dieheart soul. damn...... This post has been edited by Mr_47: Aug 25 2005, 12:18 AM |
|
|
|
|
|
Mr_47
|
Aug 26 2005, 01:40 AM
|
|
|
3dfire 1t and mantarays xt 1t hang at 3dmark mother nature!
so going back to mantarays xt 2t
|
|
|
|
|
|
Mr_47
|
Aug 26 2005, 10:47 PM
|
|
|
QUOTE(gsan @ Aug 26 2005, 01:13 PM) guy73, try tictac d26 xt or trats d27, those can get high fsb easily. get it here http://www.hwtweakers.net/postt4741.htmlbut which one ,,, too many d27 trats ? |
|
|
|
|
|
Mr_47
|
Aug 27 2005, 12:44 AM
|
|
|
QUOTE(gsan @ Aug 27 2005, 12:07 AM) cpc off = 2t rite? |
|
|
|
|
|
Mr_47
|
Aug 29 2005, 08:47 PM
|
|
|
QUOTE(teckhooi @ Aug 29 2005, 07:31 PM) OffTopic Here, AnyOne Got Idea For The DFI Ultra Infinity Mobo? Using HellFire Or TicTac Modiffied BIOs? I Am Using Hynix Ram.. Btw, AnyNice Guide For DFI OC hah here comes DFI in NF7/NF7-S Rev2.0 Modded Bios, : Discussions and Results forum! BTW: your dfi use nforce 2 chipset ka? |
|
|
|
|
|
Mr_47
|
Aug 29 2005, 10:21 PM
|
|
|
QUOTE(kaneboy85 @ Aug 29 2005, 09:56 PM) D27 619R2 (SATA 4250) cpc off = 2t rite? yu p |
|
|
|
|
|
Mr_47
|
Aug 30 2005, 12:19 AM
|
|
|
QUOTE(kaneboy85 @ Aug 30 2005, 12:05 AM) my ram is twimos SP 256x2 , which one better for me? 1T or 2T ?? doublesided chip -- 2t singlesided chip -- 1t so check your ram,,, single or doublesided.  This post has been edited by Mr_47: Aug 30 2005, 12:20 AM |
|
|
|
|
|
Mr_47
|
Sep 1 2005, 10:15 AM
|
|
|
QUOTE(Radeon @ Aug 31 2005, 01:39 PM) what hapens if used 1T with double side ram? in my system. it's not stable. can't run 3dmark 03/05 hang at mother nature. i've tried with both d273dfire-1T and mantarays xt 1T,, and both with bad result. This post has been edited by Mr_47: Sep 1 2005, 10:16 AM |
|
|
|
|
|
Mr_47
|
Sep 2 2005, 08:37 AM
|
|
|
QUOTE(HiT-AbLe @ Sep 1 2005, 04:25 PM) Really? Last time I heard AXP and barton can tahan quite high temp. bro,,, the max temp for athlon xp is around 80-90 C but in your case sufing with 59 C,,, thats too high,,,, BTW:59 C with full load of playing game that's normal. and surfing must be around 40-50 C,,, and we are talking about cpu temp. This post has been edited by Mr_47: Sep 2 2005, 08:40 AM |
|
|
|
|
|
Mr_47
|
Sep 2 2005, 10:03 PM
|
|
|
QUOTE(kaneboy85 @ Sep 2 2005, 06:14 PM) i using NF7-S v2 .. Bios . D27 619R2 (SATA 4250) Trats I already increase my Vdimm, 2.7 but still come blue screen when test prime95 then restart. Anyone know how to solve it? what about your psu? what type? power? BTW:d26 mantarays xt 2t/1T seems to be best for NF7 series. This post has been edited by Mr_47: Sep 2 2005, 10:08 PM |
|
|
|
|
|
Mr_47
|
Sep 3 2005, 11:16 AM
|
|
|
QUOTE(Cyclone87 @ Sep 3 2005, 09:36 AM) Yup. it 2.9v in the bios, but it will have 0.1v Overvolt on the vdimm. So it 3v actually. wrong,,, its 0.2v,,,,, so if it set to 2.9=3.1,,,2.8=3.0,,,2.7=2.9 BTW: kaneboy85 try change your bios to mantarays xt. This post has been edited by Mr_47: Sep 3 2005, 11:17 AM |
|
|
|
|
Quote
0.3795sec
0.40
7 queries
GZIP Disabled