hahaahahaaa.. aku dah cakap dah. sekarang tgh design window laa ni. pastu design diy ram cooler. hehehehee, cam boleh je nak buat ram cooler ni.

mlm ni kena siapkan design. aku nak tanya esok. tatau laa kena hantar design scaled or main boh je

snap yo! auto cad aku tak reti gune. warrggghahahahahhaa, dah agak mesti mau scaled punya

ada tu ada, tapi minor je. tinggal nak buat sidepanel je pun. pastu kira dah siap!

thanks

those parts are riveted. they are connected using rivets. to remove them rivets need to use small nails and drill.

here's what you'll need.

to remove the rivets
-small nail - one/two only just to whack the small holes on the rivets.
-hand drill, goes for around rm20. electric drill, better but cost a lot more.
-3mm drill bit, look for the short ones if available.

to rivet your case back
-riveter, rm16 at carrefour
-rivet nails. normal or countersunk head rivets.

for instructions, head on to youtube and search 'popping rivets'/'remove rivets'.

nak bukak balik laa ni. nanti nak jumpa abe ron ni. susah nak carik masa. almaklumlah, nak kawin. warrrggghahahahahaa!

aku tgh budget ni. bila budget dah cukup, takde masa pulak nak jumpa abe ron

it's not about patience, it's more about doing it with the right technique.



on the image (on the right) above, poke your small nail into the small hole. whack it with a hammer, whack carefully and lightly so your case won't get damaged (it will if you overdo it).



now you need to whack it so the thing inside the rivet case will be pushed out (refer image above), or at least moved further from the small hole. you need the space for your drill to work.



now you can use the hand drill like this guy did in his video. hehehehee, i know this guy is active on the forum

if you don't whack the small hole, it won't be this easy to remove them rivets from your case. IF STILL HAVE TROUBLE REMOVING, I CAN DO IT FOR YOU. I NEED THE MONEHHH, LULz...

gtx480 kena personal loan. bank rakyat ada

hehehee.. since when i do big big mods. abe ron there do big mods, i do small time also. we all need somewhere to start

wahahaha, true story ke bro? wait for it ok.. sangat busy this weekend

---

Added on October 10, 2010, 11:13 pmten! ten! tennnnnnnnnn!!!



here's the result of my sidepanel window cut. cutting made possible using waterjet. the cut is clean, no burn marks done by our friend RonModz



a closer look, measurements were a little bit off. but still good for a huge peek. will shoot more pictars when i get my acrylic window cover done. anyone want to source me acrylic window?

This post has been edited by supernothing: Oct 10 2010, 11:14 PM

not 100% finished yet. still waiting for my acrylic window and some other bling bling (small mods)

that is bitspower x-station. fan/molex adapter/extension. powered by one molex connector from your psu.

can buy from our forum member ezzydamvp

quite pricey, expect retail price to be around RM80 ish. i also forgot how much i bought it, 85 or 95 bucks

can ask ezzydamvp about the model he currently has.

nope. it has multiple connectors on the board. the board itself has some voltage regulator function (i don't know what it is, never took electronics seriously at school).

there are 5v, 7v, and normal 12v connectors. yeah it will stress the psu a bit. but no problem. i don't use all of the connectors anyway.

just one molex

check this out

http://www.bitspower.com.hk/catalog/advanc...station&x=0&y=0

that one you need to decide yourself. i have never worked with lancool before. sorry.

sticker good enough.