Does anyone know any f&b outlet around puchong or pj that uses unifi?
Unifi Official TM UniFi High Speed Broadbrand Thread V6, News: RM200 for installation after Sept
Unifi Official TM UniFi High Speed Broadbrand Thread V6, News: RM200 for installation after Sept
|
|
Jul 27 2010, 04:38 AM
Return to original view | Post
#1
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
Does anyone know any f&b outlet around puchong or pj that uses unifi?
|
|
|
|
|
|
Aug 29 2010, 06:35 PM
Return to original view | Post
#2
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
|
|
|
Aug 30 2010, 10:33 AM
Return to original view | Post
#3
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
I am still waiting for the technician to come and install... Scheduled at 10-10:30 but still they are no where to be found.
Added on August 30, 2010, 10:35 am QUOTE(sam_x @ Aug 29 2010, 11:20 PM) I am getting mine installed today. I tested the fax at a friend's place.I did not know there's a splitter that came with unifi, instead I told him to buy a normal RJ11 splitter and connect it to the port that was connected to the phone, then split it out 1 to 2, one connect to the phone one connected to the fax. This post has been edited by sohlican: Aug 30 2010, 10:35 AM |
|
|
Aug 30 2010, 12:35 PM
Return to original view | Post
#4
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
Anyone have voip settings for ZTE modem?
|
|
|
Aug 30 2010, 03:50 PM
Return to original view | Post
#5
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
Anyone that is having a ZTE VDSL2 modem and has VOIP working? Would you mind pasting a screenshot of the voice setting page?
Mine doesn't work. |
|
|
Sep 1 2010, 04:36 AM
Return to original view | Post
#6
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
Anyone having internet slow down tonight? I am @ Puchong area.
|
|
|
|
|
|
Sep 1 2010, 05:18 AM
Return to original view | Post
#7
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
Everything goes back to normal, I had vdsl line sync issue at 7am for half an hour and now everything seems to be normal, even HF and NL speed is back. Cheers... This post has been edited by sohlican: Sep 1 2010, 08:21 AM |
|
|
Sep 1 2010, 04:19 PM
Return to original view | Post
#8
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
Guys, I need help on my VOIP. The technician that came and install my unifi wasn't able to setup my VOIP, he claims that he setup mostly on huawei BTU but since I stay in a high rise building, TM gave me a ZTE 931 VDSL2 modem instead and they can't get it setup.
Anyone with ZTE 931 VDSL2 Modem and have their VOIP up and running, would you mine taking a screenshot of that VOIP Basic Setting page for me? Thank you very much. |
|
|
Sep 2 2010, 05:10 AM
Return to original view | Post
#9
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
QUOTE(Lord_Ashe @ Sep 1 2010, 09:00 PM) im surprised you signed the acceptance form. I live in a high rise too, but the techs got all my services running (after running into a problem at the riser level). after i made sure everything was tested (they insisted on making me turn on IPTV and calling using the DECT phone). btw im also on ZTE BTU. Great! I signed it coz I need them to go as I need my sleep coz I work midnight.Do you mind login into the ZTE BTU and take a screenshot of that Voice Setting Page for me? Thanks. I need some settings if you don't mind typing it. SIP Proxy Port Outgoing SIP Proxy Port SIP Registrar Port Authentication name format Thank you again. This post has been edited by sohlican: Sep 2 2010, 05:13 AM |
|
|
Sep 2 2010, 04:22 PM
Return to original view | Post
#10
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
QUOTE(rizvanrp @ Sep 2 2010, 03:23 PM) Hey sohlican, I don't have a ZTE BTU but I pulled these settings from the running-config of my Fiberhome through the console interface. Hopefully it has what you're looking for Thanks a lot! Just set it up and it's working now! LOL... Those setttings in my ZTE all are messed up by the technician. LOL... Thanks a lot man, it is working dy CODE !sip protocol config--------------------- set authname-postfix @ims.tm.com.my set escape [enable|disable] set sip timer T1 500 T2 4000 T4 5000 set special ring temp 1 400,200,400,2000 set special ring temp 2 400,200,400,2000 set special ring temp 3 400,200,400,2000 set special ring temp 4 400,200,400,2000 set special ring temp 5 400,200,400,2000 set special ring temp 6 400,200,400,2000 set special ring temp 7 400,200,400,2000 set special ring temp 8 400,200,400,2000 set special ring temp 9 400,200,400,2000 set special ring temp 10 400,200,400,2000 attach port 16 to special_ring_temp 1 set reg enable set registrar ims.tm.com.my transport udp port 5060 set proxy 10.225.0.1 transport udp port 5060 set expire-time 3600 set port 0 pole 2 set port 1 phone-number +603770rizzy set port 1 need-proxy enable set port 1 caller-id mdmf set port 1 auth-name +603770rizzy password rizzy's_pass set port 1 call-waiting disable set port 1 call-conference disable set port 1 forward-num +603770rizzy set port 1 pole 2 set port 2 need-proxy enable set port 2 caller-id mdmf set port 2 call-waiting disable set port 2 call-conference disable create profile port1 set profile port1 silence_mode compress set profile port1 soft_noise enable set profile port1 second_dial normal set profile port1 echo_cancel disable set profile port1 gain 0 set profile port1 input 0 set profile port1 jitter_Buffer 40 create profile port2 set profile port2 silence_mode compress set profile port2 soft_noise enable set profile port2 second_dial normal set profile port2 echo_cancel enable set profile port2 gain 0 set profile port2 input 0 set profile port2 jitter_Buffer 40 attach profile port1 to user 1 attach profile port2 to user 2 set local port 5060 set DnsServer 0 0.0.0.0 set conference mode 0 set attented transfer code *12* set unattent transfer code *12* set dialplan notify unambiguous set keepalive used disable set caller-id modify-time off Full authname format should be like "+60377000000@ims.tm.com.my" |
|
|
Sep 2 2010, 05:03 PM
Return to original view | Post
#11
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
QUOTE(jaylike7 @ Sep 2 2010, 04:28 PM) Hi Guys, One thing everyone must know, all your devices, BTU, D-Link, Custom Router; these 3 devices cannot have the same IP range.i've followed the guide provided in this link http://unifi.athena.my/index.php?option=co...id=49&Itemid=61 but still no go. my setup is like huawei modem -> dlink DIR-615 (Bridge mode) -> Aztech Router WL830RT4 -> PC/Laptop i follow the link above and set the same setting in Dlink DIR-615 and able to dial up from my pc, but it doesn't dial if i using the Aztech router to dial. i confirmed Aztech router settings are correct and when i checked the log from Aztech router and it keep showing message Sending PADI... Sending PADI... Sending PADI... Request timed out. oh ya, i notice my LAN icon from taskbar showing limited connectivity if i plug the DIR-615 directly to my PC after i set the DIR-615 to bridge mode. Is this correct? anyway, if above solution not possible..will it be possible if i upgrade to DD-WRT firmware and set as bridge mode again to use above setup? if possible how should i do it? i found this tutorial site but i do not know which is the correct tutorial to configure bridge mode for DD-WRT firmware. http://www.dd-wrt.com/wiki/index.php/Tutorials any kind soul can help me out here? Example BTU 192.168.1.1 D-Link 192.168.0.1 Router (Make sure your IP is xxx.xxx.xxx.xxx) Don't let it be the same as 192.168.1.x and 192.168.0.x |
|
|
Sep 6 2010, 09:57 AM
Return to original view | Post
#12
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
QUOTE(kennji @ Sep 6 2010, 09:56 AM) i'm in bandar puteri puchong. up until i leave for work this morning, everything down. none worked since yesterday afternoon. what is happening? hai...really only good for a week...sheesh tm net... Which part of Bandar Puteri you at? I am at Bandar Puteri 9, everything still work. |
|
|
Sep 7 2010, 12:43 AM
Return to original view | Post
#13
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
I am having phobia turning off/restarting the ZTE VDSL2 modem. Everytime I turned it off, I will have to wait nearly an hour to get a stable link.
Grr.... |
|
|
|
|
|
Sep 7 2010, 08:57 AM
Return to original view | Post
#14
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
QUOTE(avex|mode @ Sep 7 2010, 08:36 AM) So far I don't have any problems with corrupted downloads yet. I'm on ZTE VDSL box with DIR 615 as router. VOIP and Internet also working fine but noticed the service degrading during late night (around 10pm). Online game lags a bit and certain sites are slow to access/download. My internet was down from 9pm and it just went online. I am getting pissed. I am using the ZTE VDSL too. My max download currently is at 100kB/sSigh... |
|
|
Sep 7 2010, 09:11 AM
Return to original view | Post
#15
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
I never had any problem with streamyx before though. I some how regretted.
|
|
|
Sep 7 2010, 09:13 PM
Return to original view | Post
#16
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
I lost my VDSL sync at 9PM (6th Sep 2010), VDSL sync came back at 9AM (7th Sep 2010).
Speed is capped at 2.xmB/s (Torrent, DDL, Speedtest) IPTV stutter like there's no tomorrow Great! Oh ya, everytime I turn off my VDSL modem and turn it back on, the first time it took me 12 hours to get back the sync, the second time took me 2 hours. |
|
|
Sep 8 2010, 04:59 AM
Return to original view | Post
#17
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
|
|
|
Sep 8 2010, 07:36 AM
Return to original view | Post
#18
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
For people using ZTE 931 Series VDSL 2 Modem.
Below are the settings for VOIP First of all, you have to set your NIC to a static IP of 192.168.1.2 with a subnet mask 255.255.255.0. Gateway you may leave it blank. Then connect a LAN cable from your computer's NIC to LAN 2 or LAN 3 or LAN 4 of the VDSL 2 modem. Do not use LAN 1. Then access to the Web GUI of the VDSL 2 modem via a web browser by pointing it to 192.168.1.1 User/Pass = admin Click on Voice on the left menu panel and you'll this page below. All of the info are entered at column 1 and make sure the Account Enabled box is ticked under 1 Below are the screen shots of how the settings should be (May varies if you are from a different exchange, I am from Puchong) |
|
|
Sep 8 2010, 02:02 PM
Return to original view | Post
#19
|
![]() ![]() ![]()
Junior Member
340 posts Joined: Jan 2003 From: Malaysia |
My problem is fixed for now, on site technician came and agrees with me that there's an issue with my VDSL port. Once he called port management to change my port, every thing seems to be fine now.
He and I also agree that we should monitor the problem for a few days before closing the trouble ticket. I am glad someone actually knows what they are doing. |
|
Topic ClosedOptions
|
| Change to: | 0.0791sec
0.59
8 queries
GZIP Disabled
Time is now: 1st December 2025 - 09:29 AM |