Lowyat.Net Watercooling Club V2, Pictures of setups & screenies!
|
|
 Jul 18 2010, 11:53 PM
Return to original view | Post
#1
|
 
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang  
|
QUOTE(selfdz87 @ Jul 18 2010, 09:13 PM) hey...car radiator coolant can use or not??have green n blue color... car coolant consist with ethylene glycol, which like alcohol, may damage ur acrylic reservoir... as bro monsh said, not value... cheap summore....  does it hve any effect in WC setup??  |
|
|
|
|
|
Jul 25 2010, 12:35 AM
Return to original view | Post
#2
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
FPI = fin per inch... which means number on fin on the radiator per inch of the length of the radiator...
the fin here is the zig zag metal on the radiator... higher FPI doesnt directly relate to higher performance... the heat dissipation of a radiator, much depends on fan used couple with the radiator... lower FPI (like the ekwb) usually means (not applicable to all radiator) the radiator work nicer with mid/low fan and higher FPI (like the mighty HWlabs GTX and GTS) will need higher rpm fan to really show the FPI power... and higher rpm fan means higher the noise generation... This post has been edited by Alexes: Jul 25 2010, 12:38 AM |
|
|
Jul 25 2010, 01:01 AM
Return to original view | Post
#3
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
QUOTE So what if high r.p.m. fans with low cfm or static pressure? Only the speed of the fan motor matters? cfm, static pressure, rpm, all actually matters... like the recent silverstone fan really picture that nicely... but from my point of view, rpm plays a big role by pulling air for the fan 1st... no matter how nice the cfm and static pressure, rpm will determine the amount of air pulling in by the fan...This post has been edited by Alexes: Jul 25 2010, 01:02 AM |
|
|
Jul 25 2010, 01:16 AM
Return to original view | Post
#4
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
we like water cooling, and we came here to share our wisdom...
can all the pro, give a change to noob like me to learn from u all again, and we left the bad karma away? Added on July 25, 2010, 1:17 am QUOTE(monsh @ Jul 25 2010, 01:05 AM) does silverstone will produce the new fans for 120mm in possibly 2k RPM ? if that 2k really came out, maybe the radiator fin will be bended by it... cause i think they only produce 1350RPM for now right ? that fan is totally sweet for rad ^^,  This post has been edited by Alexes: Jul 25 2010, 01:17 AM |
|
|
Aug 7 2010, 04:36 PM
Return to original view | Post
#5
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
QUOTE(subrok007 @ Aug 7 2010, 10:17 AM) guys, cant said anything with the price and performance... swiftech make one of the best value radiator...Swiftech MCR-420 (Quad) is a good radiator? in terms of performance, cooling, FPI, etc.... |
|
|
Aug 8 2010, 10:56 AM
Return to original view | Post
#6
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
QUOTE(daxzero @ Aug 8 2010, 10:16 AM) 1# whn u buy a pump, how to see the pump is gd or bad ? 1. to carry water through the loop...2# tubing got how many size ? 3# if 2 pump 2gether wif 1 loop will wat happen ? 2. 1/4, 3/8, 1/2... 3. higher flow and still got flow when other pump dead... u should read through previous post and google for some general questions... u can pretty much found the answers from there...  |
|
|
|
|
|
Aug 17 2010, 04:29 PM
Return to original view | Post
#7
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
QUOTE(monsh @ Aug 17 2010, 03:58 PM) laa i tot ppl knew already ? i think he in the middle on something big... huge...vlad has to update already la . only ppl who are asking actually know what sort of things he carries . apes.com.my... coming soon... This post has been edited by Alexes: Aug 17 2010, 04:34 PM |
|
|
Aug 21 2010, 04:17 PM
Return to original view | Post
#8
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
QUOTE(subrok007 @ Aug 21 2010, 03:32 PM) yes mine 1 is old 1... but i got bubble inside... ur reservoir is revision 2... can outside down... to prevent the buble, by letting coolant in from up and fit a fitting inside the res, then attach a tube to the fitting... or filled the res full... |
|
|
Apr 30 2011, 01:46 PM
Return to original view | Post
#9
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
laing d5 will be a robust pump for the job...
|
|
|
May 8 2011, 09:56 AM
Return to original view | Post
#10
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
swiftech version of laing ddc 3.25 with custom pwm control...
|
|
|
May 9 2011, 11:55 AM
Return to original view | Post
#11
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
|
|
|
May 19 2011, 11:13 AM
Return to original view | Post
#12
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
apes got... jibek and ezzy are their representative here at lowyat.net...
apes got anything u need, from top to bottom... |
|
|
May 23 2011, 06:40 PM
Return to original view | Post
#13
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
QUOTE(louis91 @ May 23 2011, 09:59 AM) yeah.. my current status quite broke, that's why the Rasa kit is good for starters.. Only 150 everything included and since i'm first timer it's a good deal. Malaysia currency too small, pay shipping also can pokai around rm 250.. that is a nice kit, good block and nice and thick rad, just the pump may need upgrade in future with more blocks and rad... know, but they don't ship internationally + im in canada.. US so close to my place.. why not consider ekwb kit? QUOTE(acther @ May 23 2011, 06:08 PM) [attachmentid=2230964] monster, may i know what case is that?[attachmentid=2230969] |
|
|
|
|
|
May 24 2011, 08:57 AM
Return to original view | Post
#14
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
480 thick rad (xspc, sr1, gtx or feser) or 420 rad (sr1 or gtx or ek) enough for 1 gpu or 1 cpu if not super oc... even 360 enough for same case...
but of course dual rad more nice to look at... |
|
|
May 24 2011, 03:45 PM
Return to original view | Post
#15
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
QUOTE(kakicam @ May 24 2011, 10:43 AM) meaning my feser 480 and ek 140 will be enough la for 2x gtx480, cpu mild oc and nb/sb..!! that's alots of rad... |
|
|
Jun 3 2011, 12:08 AM
Return to original view | Post
#16
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
QUOTE(supernothing @ Jun 2 2011, 01:44 PM) @owi: pictars when the build is ready made in germany = premium stuffs... new modular type rads from aquacomputer. price is crazy...  http://www.xtremesystems.org/forums/showthread.php?t=271698 http://shop.aquacomputer.de/index.php?language=en& so, whoi's bringing them in?  the dawn of feser admiral... |
|
|
Jun 5 2011, 01:08 PM
Return to original view | Post
#17
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
the reason the tube became chalky over time cause the platisizer... tygon tube tend to act the way... primochill clear tube will be my choice... it do get chalky but not that intense...
and if u mind the cloudy or chalky tube... can opt for black or color tube... as for the size, my recomendation will be 3/8, 5/8... the 1/2, 3/4 too large and 1/4 tube too small... 3/8, 1/2 will kink easily... |
|
|
Jun 5 2011, 02:03 PM
Return to original view | Post
#18
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
the length should refer to how u gonna route ur we... for mid tower case with one rad, one block, should be enough...
|
|
|
Jun 5 2011, 03:43 PM
Return to original view | Post
#19
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
QUOTE(louis91 @ Jun 5 2011, 02:43 PM) coz its a res/pump combo im gonna put in the 5.25" bay there.. i think 4 feet will do... |
|
|
Jun 5 2011, 06:37 PM
Return to original view | Post
#20
|
|
Senior Member
1,314 posts Joined: Aug 2007 From: Sarikei --> Kajang
|
can be use compression as long the spacing between inlet and outlet...
can get cheap cheap tube cutter for round RM10 at Mr. DIY... |
|
Topic ClosedOptions
|
| Change to: |  0.0546sec
 1.66
 7 queries
 GZIP Disabled
Time is now: 27th November 2025 - 06:43 AM |
Quote