white box inside is??

nice RX480

here goes my rig

Any comment please?



This post has been edited by subrok007: Oct 25 2010, 11:37 PM

tonight will upload my 6hrs OCCT stability test

but b4 that, my setting in OCCT is medium data sheet test, can it consider stable?

my load test using OCCT test..



6 hours OCCT test.... pass

@holy,

where u put your 360 rad?

advise u dont use cable tie to tie your tube... ugly look.. let it natural bend or use some 45 or 90 fittings.

hey, we use same psu le... u sleeve it by MDPC?

@owikh84, btw i din install aircond in my room...

so how to solve? OC higher can solve condensation?

and OCCT test using middle data sheet pass 6 hours test consider stable?

@holy,

your casing can put 360 on top ka?? take a shot picture on that area pls!!

@owikh84, lichyetan ,

walao so serious ka?? but i think wont go below ambient temperature rite?
bcos cpu so hot...

this is another short test about 15min... prime95




This post has been edited by subrok007: Oct 27 2010, 07:33 PM

M3.5 and 6/32 actually different in line.... the line use to be screw...

@holy,

nice setup.... btw, u can turn your water block in order to have better routing tube...

and u put your fan on top of radiator?

no lo bro, sleeve psu cost much ... btw, i like original ..

---

Added on October 30, 2010, 12:51 pm@cheesycake

u have to post your rig here... not only discussion as this thread is dedicate for picture thread.

This post has been edited by subrok007: Oct 30 2010, 12:51 PM

very nice rig u have there.... u mount your radiator at backpanel?

A minor suggestion to Clawhammer.... can we have WC list and Spec in first page..
for example:



etc....

This post has been edited by subrok007: Nov 1 2010, 07:19 PM

i think if he wan route the tube to other way like u said, then no choice, have to go water block 1st instead radiator..

the best out there 1 is XSPC and TFC Xchanger,

if u can afford the price for sure..

Wow, awesome CM R4 can pwn F12.. really out of expectation...

@denieru

have u oc your processor

let's try it out..

btw, really nice temp.. merely to negative temperature..

ironhouse...

are u really need 2 loop to cool only your phenom??

or u even cool GTX465??

because 2 loop to cool phenom look like no different at all.. yes no different bcos its equal..

ironhorse

your pump is adequately to running all the loop...

actually how many pump u put for the loop still no different at all...

because it will equilibrium. try see previous page.. some1 dy mentioned that....

ah bao..

come show your iandh..

btw, i dy sold my reservoir now planning to buy Advance X2 250 liao...

wat pump and reservoir u use?

nice..

oh ya wat casing u use? it so compact 1??

although its compact.. but i like it...

nice work there...

btw, i wondering how was the temperature since he using single rad...