dude, regarding the language, u know its a forum .
it aint English 101 .
accept it the way it is .
at least u could figure out what they're trying to say .

that casing is old thingy .
i think its been lying around for 3-4 years alerady .
hehe
bet it looks darn ugly by now .
anyway, no one post new pictures ?

i tot rsz77 got new mobo block + res ? when can we see them in action ?

does silverstone will produce the new fans for 120mm in possibly 2k RPM ?
cause i think they only produce 1350RPM for now right ?
that fan is totally sweet for rad ^^,

dude, if u want to be on a serious side, be my guess .
if u want to compare LYN to xtremesystem, OCF whatsoever, then its a wrong place to be .
dude , we all learning .

us talking crap a lot doesnt mean we dont know anything and for those who talk less doesnt mean they know a lot .

its just how people roll .
either way its up to us for who we want to be .
but its definitely not ur job to try to correct or harras us in any way .

and by saying "check for all his post" i definitely know its targeted to me .
y dont u let the job to mod for evaluating whether or not my posts are constructive or not .
cause if most of them are all for the sake of geting post count, i'd be banned long time ago .

if u dont like this forum then i'd be glad to say no one is holding ur back to get lost of this forum
for some of the oldies are already gone and guess what, they're not trying to change things .

cause probably they know the concept of having to change ownself before trying to change others

dude, if u dont like it, then keep it to yourself .
u cant say if everyone is loving u or hating u .

dude, just stick back to the watercooling stories .

---

Added on July 25, 2010, 3:00 am@alexes

is it even possible to break those fins by using air ? its not air compressor though .
anyway, the spec says only around 35CFM at 1.71mmH2O static pressure .
probably if they could push around 70-80CFM at 3mmH20 static pressure if they produce those higher RPM fans ?

but the AP121 is already rated at 1500RPM .
probably the 2000RPM would be roughly 1.25 times better than the AP121 ?

This post has been edited by monsh: Jul 25 2010, 03:00 AM

@mato89

either way is fine but the orientation of the inlet if it is set to mid then i think there's a small increase in performance .
but most probably 1C diff only .

Joe ! Inbox full .
clear sikit please .
susah nak contact

alright great ! hehe
anyway, can u tell us what sort of wc setup u got dude ?

This post has been edited by monsh: Jul 26 2010, 10:35 PM

good looking setup u have there !

and increase the chance of melting the pump propeller .

nice camera gives u nice shot and the result = very nice !
heh

at least u got good camera .
but no doubt u have clean loop design .
i love it .
great job bro !

then u should try push ur c2q to 4ghz .
utilize the wc bro .
its one of the reason we all shift to wc .
lower temp, better yield ^^,

stuck on windows boot most probably not enough vNB or vCORE i think .
try pump more .
with WC shouldnt be much problem pumping voltage .
just monitor ur NB scared its too hot

try pump 1.4v 1st .
should be able to boot .
long time left LGA775 forgot the system already >.<"

dude, u could never go wrong with EK CPU WB .
the EK Supreme-HF Full nickel = winrar !
anyawy, pair up the pump with aftermarket cooler .
better result ^^,

these sellers are all selling them dude .
i think u can check them before u get them .
no worry bout cosmetic issue .
anyway, either u or they will check .
they sure want to deliver good service to u .

keh keh keh .
if ur have the money, try to opt for the best option la .
right now i think should be feser or HWlab .

well its of all its called Laing not Liang .
and mcp655-b is not laing d4 dude .
MCP650 = Laing D4 .

kaka u made such a disgrace to WC user !
do some cable management dude !

nope its for OCed i7 + OCed GTX480 SLI which would require around 1k watt .
and they're looking for single rail design ^^,