aiya leakage is normal lah..
that's why leak test is very important before powering up ur rig.
I think T-connector is very useful for draining.



During Raya I managed to put the EK 3 SLI bridge on my GTX580s. Found some problems...
Slanted a lil bit haiz.
And noticed that the CPU loop coolant becomes a lot brighter than the GPU loop. Need to top up some blood red dye bomb again.
I cant put my Xonar D2X onto the last PCIEX4 slot due being blocked by the EK FC link. Don't know whether an PCIE riser cable will fix this or not as I wana put the sound card on top of the mobo afraid will be hit by compression fittings from the top rad.
Might dump this EK bridge and go back to better looking Bitspower Crystal link tube+adapter combo.

may i know how long time it will take to remove air bubble?

being running the rig for 14hrs++, there are bubbles from time to time and the water level in res is reducing.

now left 1/2 water instead of 2/4 initially.

I added a gigantic kill coil into my res:



If anybody is interested, I can have a bunch of these made My uncle runs a jewelry store

Performance of xspc rx360 radiator with 3x AC 12 fans

water temp average 31'c<36'c according to the reading of 5 days non stop folding with 1.35v@92w@4.5ghz@i7 2600k

cpu temp 65'c max and gpu 41'c max (during gaming/folding)

estimated wattage cpu 95watt, pump+gpu 150watt, ambient temp 29'c<32'c, giant distilled water