here's my my latest priming stable using fft option(max 1024k MAX to 128k MIN), 1 minute per test(thou sumtimes they go more thn 1 test, like to test for some FFT, weird )


this time my CPU-NB i put 1.25v only rather thn 1.4v, my cpu volt still the same(1.47v in bios but it will always be lower using Everest, CPU-Z n HWmonitor), CPU-NB speed still at 2600MHz, tats all i change, but weird my second worker(2nd core) got fatal error, but my other workers still fine n manage to pass the test( izzit bcoz i enable rounding check error?) well i dunnno, dun tell me i got defect core . max temps it hit was 61 C, but for a while it will drop back even at 58 C constantly when the test progress, man OC is fun but pening siot!!!

This post has been edited by selferino: Jul 23 2010, 02:35 PM

one prob bro ah_khoo, in my BIOS, no option for vhtt, no option for multi change of nb freq. see here in the pic of the BIOS i took fom the net..

---

Added on July 23, 2010, 8:10 pmmy mobo is gaygaybyte 870a-ud3 btw

---

Added on July 23, 2010, 8:15 pmthe pic i posted was ddr2, mine using ddr3, but other are the same, just in case

This post has been edited by selferino: Jul 23 2010, 08:15 PM

yeah its CTRL + F1 but thn no OC option will come out, already check the manual anytin, man, my msi mobo last time even has more option!

---

Added on July 23, 2010, 8:48 pmonly some chipset confiq only(spectrum stuff bla3)

This post has been edited by selferino: Jul 23 2010, 08:49 PM

owh yeah my mistake, no otption for ht link multi, only freq, n no option for ht link volt setting. MSI still has these as far as i can remember, why not gaygaybyte? shud i use AOD instead? but thn evertime i OC, like if i set the bios for cpu vcore at 1.47v, n thn go into windows n open AOD, it willl read at the default volt(1.4v), same case goes to the cpu-nb volt. but AOD alwat gets the cpu freq ryte( so does cpu-z )

bro ah-khoo, do u enabled in place fft(tick or untick the box) ? btw, evertime i set the min to 8k, the 1st test will run at 1024k, 2nd test straight go to 8k, 3rd test go to 10k, 4th test only go to 896k, 5th test go to 768k but thn the next test go back way down to 12k. izzit like this in between one? i see u do ur prime always end wif 8k one, why my one liddat?

anyways, wanna share my minimum under-volt using stock speed of my clock(from 1.4v to 1.25 )
C!E and CnQ enabled


This post has been edited by selferino: Jul 25 2010, 01:47 AM

keep hearing this team dark OC, wut izzit eh, Gskill rams?

x penah ak dgr TEAM rams.... wuuu, cloudwan ade x6, 125watter ke 95watter 2???

this team dark, same brand as those TEAM ELITE ramsticks eh? the rams wif heatsinks. btw,their ddr3 1333 cl9 vs KVR ddr3 1333 cl9,which is better? or they r the same?

btw if just OC ram, playing around wif the latency, wut settings shud i check/uncheck, fft min/max size in prime95(bro ah_khoo, if u can answer this, would be nice )

This post has been edited by selferino: Jul 27 2010, 06:23 PM

that one shud be temp related, or not enuf volt pumped into the proc, correct me if im wrong sifus

so far OCing(n undervolting) ive encounter 2 type of bluescreen, one says that "bla3 hardware failure", another one(this happens when i was undervolting) was "bla3 clock generated error", both BSOD look alike but first line are different, the second one i solved by adding more cpu volt( you shud have guess coz im undervolting when getting this error)

is any other way to change my RAM timings in wondows 7 without using AOD, n BIOS.

690g? why go bck to ddr2 bro, tot last tyme u use ddr3?

ke org nyer tua

Ram bible lol, sis verdict, bile nk update database phenom II OC kt OC database eh.......

bailklah, hoho

quite high temps there, ur using custom WC to tame the temps ryte?

dem you WC user, ak jeles, ni yg wat ak x sabor2 nk lap cooler ak nie!

IBT? details plz, if its tat fast of detection, i would lurve to try it too!

but bro athlon is ryte, we run the fast way first, thn we go priming, if IBT fails, no need to prime, hav to tweak 1st

haha ur ryte, priming can isolate problems based on the settings, but some people argue the best stress program for heat output is linx...i think.....btw..correct me if im wrong then..