what i meant was: isn't it adata 1866 (available in lyp) is on hyper? just grab it...

still workin on it sir, i dun run 32m as my fren's chip sucks to d max, only prime blend test. will go to his house & try again, 875 * 2 should be doable, fingers crossed.

erm... lai lai... dun be shy... keep guessin...

patriot could be on d9 sis... when u need > 1.7v for a 1600 @ cas7, most prolly d sticks are on d9. as for gskill, it would be a steal if they use psc on mid-low end which can be found on higher end. could be bbse/bdbg too... binned @ 1333 oso called xmp... ' lol'ed hard...

This post has been edited by ah_khoo: Sep 8 2010, 10:26 AM

from what sis verdict & sir antonio mentioned. they are reliable source so worry not sir...

samsung has been outta d frame since d famous tccd/uccc during d gud old days of ddr1.

hint:

was just pullin ya legs bro, it's not winova.

ddr1 i used: khx, patriot, gskill, team xtreem, ocz
ddr2 i used: crucial, kvr, twinmos, ocz, khx, team xtreem
ddr3 i used: kvr, team xtreem, geil, crucial value, corsair, ???

??? = brand that i never use on ddr2 & ddr3

spend d whole nite memtest ??? lastnite, initial findin:

1333 @ 6-6-6 w/ 1.xv
1600 @ 7-7-7 w/ 1.5xv
1800 @ 8-8-8 w/ 1.5xv
1800 @ 7-8-7 w/ 1.515v

This post has been edited by ah_khoo: Sep 13 2010, 01:12 PM

wrong...

thou i'd really love to get my hands on muskins, never get d chance to test their red/black line...

wrong oso...


oklah, nuf w/ d guessin, later kena warnin off topic. here's d ram...



*taken from BenchMark Reviews

could be low quality a.k.a left over PSC inside due to d low voltageness, will try out more tonite & update u guys. dun put too much hope thou...

This post has been edited by ah_khoo: Sep 8 2010, 05:32 PM

i'm pretty sure those are on hyper sir, PSC & BBSE can't really do 1600@6-6-6.

my fren's attempt is far from bein stable... 2~3 mins only... he hardly play subtimings as well...

bawak aje bro...

for those bros who gonna travel, be careful on d road... think of ya love ones... (copy paste from my bro's fb )


back to topic...



This post has been edited by ah_khoo: Sep 8 2010, 09:56 PM

sir, aren't those sticks in d review rated at 1600 @ 6-7-6 while d one on sale are 6-6-6 all d way? In d hwcanucks review, those sticks cant even do 6-6-6 on intel platform which we all knew is more forgivin on ram oc, so i think most likely they are just on bbse.

D problem w psc is they dont like tight trcd @ high freq. Bbse (team dark lv 1600) managed to do 1700 @ 7-7-7, i've tried d same setting on flare n eco but to no avail, heck, even d xtreem 2k (bbse as well from what i heard) can't do that. But psc shines (even not by miles) in higher freq, some more they dislike volt (vdimm) which make them fun to tweak, provide ya chip comes w a gud imc ofcoz.

From what i read, ram oc on intel platform (particularly i5 & i7) oso imc bound. If d imc is weak, there's nothing much can be done even one have great sticks. Correct me if i'm wrong, intel super noob i am.


very sweet clock there bro. but it can be better if u can crank up d nb & ram freq to certain extent instead of current settin. at ~4.0GH cpu clock, u definitely needs higher freq on ram & imc. nonetheless, great clock u have on b55...

This post has been edited by ah_khoo: Sep 9 2010, 10:29 AM

at that kinda cpu clock, i'd have 1600 @ 7-7-7 at least (tighter d better ofcoz but that means more $$$) & nb freq @ 2600 atleast. u can increase nb freq @ bios by selectin high cpu-nb multi. imc = cpu-nb.

not necessary to get a pair of ram rated @ higher freq as amd still prefer tight timin (which something hard to achieve @ high freq unless ya ram are powered by hyper chips).

This post has been edited by ah_khoo: Sep 9 2010, 01:51 PM

haven't try but after a quick google session it seems these sticks are on bbse as well. from what i've tried, bbse (geil ultra 2133/team xtreem 2k) can do:

1. 1440 @ 6-6-6 w/ 1.66v Geil Ultra 2133
2. 1700 @ 7-7-7 w/ 1.6v Geil Ultra 2133
3. 1824 @ 7-8-7 w/ 1.725 Team Xtreem 2K
4. 1840 @ 7-8-7 w/ 1.68 Geil Ultra 2133

while PSC can do

1. 1333 @ 6-6-6 w/ ~1.35v (Gskill ECO 1333, memtest only, no ss)
2. 1600 @ 6-7-6 w/ 1.5v Gskill Flare 2K
3. 1840 @ 7-8-7 w/ 1.53v Gskill Flare 2K

what kinda sticks ur after bro? the type u want will determine d price u gonna pay...

This post has been edited by ah_khoo: Sep 9 2010, 05:31 PM

depends, got 2 batch of dom gt 2k cas 8. ealier batch is CMG4GX3M2A2000C8, runnin on hyper which already EOL, newer batch is CMT4GX3M2A2000C8, Rev 7.1 (d only one rev i know so far) is believed to be runnin on PSC. from what i know, only hyper are able to do 6-6-6 all d way up to 18xx, for same freq, bbse & psc need to be loosen to 7-8-7 or even 7-9-7 w/ d latter requires less volt. i mite be wrong thou...

This post has been edited by ah_khoo: Sep 9 2010, 05:39 PM

not so sure bout hypers, but d9gtr only found on 1gb sticks iirc, so d comparison is not valid.imo d smaller d size, d easier to hit higher clock. i'd take d former if i were u, 4g runnin 18xx @ cas6 is pure orgasm...

some more, micron are known to love volts, while elpida chippies are more environmental friendly, most top up @ 1.7xv, any higher wont really help. ofcoz this is based on what i've tried lah...

This post has been edited by ah_khoo: Sep 9 2010, 05:57 PM

for more info, pls google...

i dunno bro, dun have d luxury to try so many ram. but those available here (sgp) have not been impressive. their lv series in obsidian is kinda average, hardly see ppl use gold series while fatality is nothing but markettin gimmicks to me. d only serie that caught my eyes was animal serie, but again i never try one myself so i can't really comment. from review they did quite gud.

salam aidilfitri sis... same to others in sis xixo, d ultra family, kunta, bro cv, ts & lain2...

why this year d emoticons no songkok one?

sir, i believe that's almost d limit ledi, i managed only a 3.3GHz, iirc, higher volt didn't help. what's ya load temp & vcore @ 3.335GHz? d board ur usin is???

here is my attempt...

http://forum.lowyat.net/index.php?act=Atta...=post&id=914106

finally!!!!

1333 @ 7-7-7 runnin at 1800 @ 7-8-7, luck is with me again this time...



This post has been edited by ah_khoo: Sep 10 2010, 09:00 PM

hmm... u got a very gud chip there sir... 3.3ghz w < 1.4v is simply awesome for a kuma.

fix ya coolin issue then we can see bigger figures bein squeezed outta ya chip...

that was already d lowest i can go w, either chip issue or user problem...

was just bein lucky this time sis, but no luck on tight timin...

i think only pi, flare & other mid~high end series are capable of doin cas 6 on amd platform. u need decent PSC chippies to do 1600 @ 6-7-6. this cheapo eco could be on low quality psc/bbse (doubt so since bbse requires higher volt).

yeah, amd seems to be able to handle hyper sticks well, so far i have yet to hear any amd users in xs complainin their sticks bein killed. but to be fair, amd can't push hyper as far as intel, so this mite be d reason.

me ownin hyper? that would be a dream sis, i'm happy w/ my oem d9gmh....

here's a quickie i did last nite b4 headin home...



i dun play w/ channel thingy, imo it's best to leave them to default.

This post has been edited by ah_khoo: Sep 11 2010, 11:39 AM

just for d fun of havin higher number... i'm pretty sure it can't last for an hour...

it's just a pair of eco 1333 cas 7 bro.. cheap stuff bought by my fren...

0.05v aint too much of a diff... some more, hw differ from rig to rig ma...


btw, here's 1 hour done on 1900 @ 7-9-7....



This post has been edited by ah_khoo: Sep 13 2010, 09:51 AM

My humble 2cents bro:

Clock is great @ 4ghz.
nb freq is great @ 3ghz.
Ram @ 1ghz cas9 > can be better. Try 1ghz @ 7-9-7 or 800mhz @ 7-7-7, i believe either one will be better than d current setup. What's d exact model & revision of ya ram?

try these:

6-6-6 @ 1333, 1.35~1.4v
6-7-6 @ 1600, 1.5xv
7-8-7 @ 1900~1940, 1.5xv

if u can do all listed above i'm pretty sure u can hit 7-9-7 @ 1k or somewhere near there.

if can keep it below 1.4v that would be awesome...

This post has been edited by ah_khoo: Sep 13 2010, 09:43 AM

bro, d cheapo eco 1333 can't do tight timing @ 1600 ish, i made a wrong statement b4, 1600 @ 7-7-7 is not prime stable iirc. 1333 @ 6-6-6 is really nothing... iirc 1600 @ 6-7-6 gives d best bandwidth in memtest...

they shine @ 1800, any higher need tonnes of tweak (volt). was dead happy 1900 was doable but it was pure luck only. tried to do 967 * 2 but no go. let's see whether it can be done after a day of memtest @ 1900. that's how i spent d cuti during hari raya. lifeless isn't it???

This post has been edited by ah_khoo: Sep 13 2010, 10:15 AM