Amoda 7th floor....I remembered because I RMAed my Crucial Ballistix Tracer RAMs 1 month plus ago

no need for d future ram coz i can help... 

joke aside everybody is kinda quite lately, no new toys ke? 

Everything increase, Salary maintain.

-pWs-

any1 noe the best way of applying tx-3 TIm on Phenom II procs? gamab2 skeit can help, this TIm is freaking sticky thinking of buying bck tx-2, way3 easier to apply, haih....

Is gigabyte okay? GA-890GPA-UD3H okay?
Looking for one with dual lan and extra sata ports.
Pls recommend, I am new to the 890 mobo.

hello friend..

WTA..

connecting extra fan 120mm to mobo can cause mobo overvolt?

usually, people connect extra fan to molex?

mine, 2x120mm (ekzos and front fan)connecting to mobo pin..

could be dangerous?

woo, you got 180mm fan?
what casing you are using? 

my friend have trouble with this thing.. haha!

mobo burn!

yup i agree with abg otromen must be the fan it self short circuit

short circuit wont make the mobo burn i think..since i encounter many many times of short circuit..
just the PC wont able to start for few secs..need to off the power 1st.. PSU thingy..not mobo..

imma cheapo man.. connect fan to mobo also dont have those 3pin connector..direct selotape to the pins   

btw abg otromen..the remaining money been deposited..check ur PM

damn, now I dunno why, my core 0 still will fail instantly when run small ffts, blend, and large ffts. Last time no problems

Can't do anything, voltage increase won't cut it, increase NB also won't cut it. What went wrong also I don't know...haihzz...
Currently running on stock, no problems ~_~

Okie bro, stick with giga mobo. Cant afford asus. too exp.
I would be getting the following tomorrow:
GA-890GPA-UD3H - RM485
Corsair 4GB DDR3 1600C9 - RM399
AMD Proc 1090T - RM950
HAF-X - RM535
Cooler Master Silent Pro 600W Modular Real Power Power Supply - RM320
Corsair H55 wc kit - RM320

Sifus, pls help to give some commend on the items above.
I ll use back my current cheapalak hdd + ssd n GC.
How to oc ram from 1333 to 1600 on BE chip.

Thanks

I have bn using amd since my first pc.
I have no luck in oc. Just noobie n my sys always crash.
My PC is left on 24 x 7.
Hope 1090T can be OC to 4Ghz for 24 x 7 use.
Please guide OC ram from 1333 to 1600 with BE chip.

Thanks

Waaa I didn't know on V6 campaign. Good info but it's limited to first 80 customers.
SSD is only value series SSD.

---

Added on August 4, 2010, 10:53 pmThank you for guide on ram setting. I hope I can get it done.

adng but can pass Super PI 32MB on all 4 cores flawlessly
prime95 + occt fail ~_~ core 0

it's a sign... time for better chip... 

i can pass occt linpack (or whatever they call it) but when i prime (blend), voila... rebooted... 

abg gaban muncul pulak... 

890fx chipset already in rm4++ range ka?

fuh..

terbakar nak amik sbjik nih..

sifu guide me plox.

proc - phenom 9550 2.2ghz
mobo - asus M3A78

since my mobo dont have NB and HT multiplier so only can increase bus speed from 200 stock to 230mhz(anything after 240 render pc unbootable) but this also change HT link and NB frequency to 2070.1mhz

it got option to set HT link to 1.8ghz so i set it to that.
i also need to set memory speed to 333 3:5 ratio and and with 230 bus speed, ram frequency become 383.4 or 766.8mhz

then i change memory timing to 4-4-4-8-22-2T

my question = which is better, using stock ram setting with 800mhz speed or this 4-4-4-8-22-2T with 766.8mhz speed?
also plox comment on my setting if got wrong somewhere and correct me where its wrong. my 1st time overclocking so i dont mind any critic, term also dont know right or wrong

option to set HTlink not multiplier the option given is 200mhz,400,600,800,1ghz and so on till 1.8ghz max

by default NB and HTlink frequency is 1804.1mhz

dram frequency 400.9mhz 1:2, 5-5-5-18-24-2t timing
with those setting, do i need to increase voltage anywhere?
on other note, i start to think this board suck and not for overclocking.
can suggest cheap2 good board?

woo, i don't want my quad core last so fast. 

nb freq would be d only thing stand in ya way for higher clock since ht link freq and others can be lowered. there's nothing much can be done coz as long as u can't adjust nb freq, u'll always stuck there. u can try BAR Edit to lower down nb freq multi in windows thou provided ur able to make it to ya desktop at least. i was lucky enuf to have a decent oc back then, d chip managed a 285htt on abit ax78, ss here:

http://s.lowyat.net/uploads//attach-21/pos...-1218894504.jpg

as for which ram setting is better, i always use memtest (dos), check d memory session, d higher d better. this is not 100% accurate as pro mostly use windows based mem bandwidth benchies like sandra, evereset & others...  :/nod:

hope this help...  ;/)
790fx still decent enuf to run a thuban, even on ddr2 platform so dun be too disheartened bro. older not necessarily means more inferior... unless ur comparin to chiv + geil ultra...  :/w  :/P

wei uncle 790fx long gone alredy la... no only have 770xxx 

otromen alredy have C4F nice..nice..

Found out something today
I went back to stock 2.2Ghz quad core and ran small ffts test
No errors at all, but I found 1 thing that justifies the prime error that keeps popping out recently

After stopping the tests, I found out that Core 0 (which always fails) is actually slower by 10 tests (6x compared to the other 3 cores at 7x tests) <---Oh My.....