had a problem with the netbook speaker. apparently only one of the 2 sides works, and no matter which way i adjusted the speaker balance from the control panel, only one the right side work while the left side is soundless.

since i bought this 2nd hand, can i get a warranty cover from HP? no warranty card given to me when i bought it though...

classic mode vs normal win7 starter theme?
tried and both theme had same response.. no visible lag between them!...
but now usign aero.. good!!

is this streamyx cool uni pack free gift ??

fcuk 90 , u say now the net book is different a ?

^yes it will.

Make an external DVD copy of recovery first.

shrink volume better  

By default (from factory):
C:\ is Windows partition (220GB)
D:\ is RECOVERY (13GB)
E:\ is HP Tools (99MB)

since the C is too large, thus i wanna shrink it, after i successfully shrink it, then i go format the new "Unallocated Partition" (to create New Simple Volume), but it pop out the problem as below...



any ideas??
 

Heard of wubi , google for it , download. You can install ubuntu and keep windows. Dont like ubuntu , simply remove it from windows. You still preserve your MBR , recovery partition and everything else.

Easier this way rather then you going through a complicated method

Anyone got this problem? The power adapter will just simply shut itself off suddenly regardless the switch is on.

Just shut off and the netbook will run on battery. Apparently mine just shut off itself lol

Lol no idea

---

Added on July 26, 2010, 1:40 amK.

@fcuk90

I found out the way to use the RT3090 on HP Mini 110 for Ubuntu.

Open your terminal and key in the following

as root (or sudo before each line):
mkdir -p /etc/Wireless/RT2860STA/
touch /etc/Wireless/RT2860STA/RT2860STA.dat
service network-manager restart

What is the password for su btw?

^ click on "applications" > system tools > konsole

Uhhhhhh I am using KDE Now @.@ But IIRC it should be somewhere there. for GNome users, you are able to find Terminal instead of Konsole. The WiFi Driver is actually installed already.

---

Added on July 26, 2010, 12:02 pmOn another note, when 110 doesn't have GPS, can always get the wireless card with GPS built in oolololololol.

In Ubuntu, the sound doesn't work as well.

Of course =D

Whats the command

@win7 - Sorry , thats how it works. Thats why we have GPT. Sadly only OS that takes advantage (well two) are linux and umm OSX . Windows fails to see GPT (unless you're talking bout server/enterprise edition) . GPT allows you to dynamically resize and make new partitions from free space. You are not limited to 4 primary partitions. That means you can have like 15 OSes installed on one HDD !

Open your terminal and key in the following

as root (or sudo before each line):
mkdir -p /etc/Wireless/RT2860STA/
touch /etc/Wireless/RT2860STA/RT2860STA.dat
service network-manager restart

http://wiki.debian.org/rt2860sta

Do me a lspci -vn or lspci -vvnn and paste the output here

No internet ? just use ethernet and paste its output here

00:1f.3 0c05: 8086:27da (rev 02)
Subsystem: 103c:148a
Flags: medium devsel, IRQ 10
I/O ports at 3000 [size=32]
Kernel modules: i2c-i801

01:00.0 0200: 10ec:8136 (rev 04)
Subsystem: 103c:148a
Flags: bus master, fast devsel, latency 0, IRQ 26
I/O ports at 2000 [size=256]
Memory at 50004000 (64-bit, prefetchable) [size=4K]
Memory at 50000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

01:00.1 ff00: 10ec:5288 (rev 01)
Subsystem: 103c:148a
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at 53000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>

02:00.0 0280: 1814:3090
Subsystem: 1814:3090
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at 52000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt3090
Kernel modules: rt3090sta

00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011]
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 54180000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 30c0 [size=8]
Region 2: Memory at 40000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at 54000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915

00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012]
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 54100000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 54200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 53000000-53ffffff
Prefetchable memory behind bridge: 0000000050000000-0000000050ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 52000000-52ffffff
Prefetchable memory behind bridge: 0000000051000000-0000000051ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 3020 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 54204400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02) (prog-if 01)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at 30b8 [size=8]
Region 1: I/O ports at 30cc [size=4]
Region 2: I/O ports at 30b0 [size=8]
Region 3: I/O ports at 30c8 [size=4]
Region 4: I/O ports at 30a0 [size=16]
Region 5: Memory at 54204000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 3000 [size=32]
Kernel modules: i2c-i801

01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at 50004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at 50000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

01:00.1 Class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5288] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 53000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>

02:00.0 Network controller [0280]: RaLink RT3090 Wireless 802.11n 1T/1R PCIe [1814:3090]
Subsystem: RaLink RT3090 Wireless 802.11n 1T/1R PCIe [1814:3090]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 52000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt3090
Kernel modules: rt3090sta

fcuk@ubuntu:~$ ^C
fcuk@ubuntu:~$

^

mkdir -p /etc/Wireless/RT2860STA/
touch /etc/Wireless/RT2860STA/RT2860STA.dat
service network-manager restart

These 3 lines work for me. Just add in sudo in front of these lines will do.

Now I am concentrating on how to get ALSA to work. Already reinstalled Ubuntu 3 times rofl.

---

Added on July 27, 2010, 11:15 pmPeople said updating ALSA will do. Trying to update now. Will inform if it works

---

Added on July 27, 2010, 11:16 pm@fcuk90

copy paste those line, in Terminal enter sudo then shift + insert to paste the command in.

First is

sudo mkdir -p /etc/Wireless/RT2860STA/

Next

sudo touch /etc/Wireless/RT2860STA/RT2860STA.dat

lastly

sudo service network-manager restart

Just type/copy-paste those in