Hey guys i just OC my CPU from 2.4 to 3.0 GHz (I am newbie), I change the FSB frequency, PCIE frequency and CPU voltage in my bios after i get some guide from the internet and i made it to 3.0GHZ.
But I not sure the temperature is stable or not.... Below is my screenshot.

That is the status for Idel


I am lazy to open program to have a heavy load on it so i use prime95 to show the status during stress test. below is the pic


Both Asus PC Suite (AI Suite and PC Probe) shows temperature arounf 57-61 C during stress test but HWMonitor from CPUID is different.... Which 1 should I refer to ?
If HWmonitor was right then I am melting my CPU.... So is it stable or I am killing my machine....
I change my CPU voltage to 1.275000.. But i never get the correct reading... Am i did something wrong
If I am killing it please tell me i will switch it back to default...

I am currently continuing my stress test.... Anything wrong pls comment... I do not want to spoil it Xp
Advice and comment will be appreciated...

This post has been edited by gn9746203: Jun 12 2010, 09:19 PM

first thing u have to learn is resize ur pic > <''...plsss

and also pls give us details on wat kind of cooling system u have in ur casing..

what cooling are u using?
the cpu temp show by asus software is not the core temp, it was the temp sensor from motherboard around the processor.
the temp show by hwmonitor are the real temp of your processor, it read from the sensor inside the processor die, the temp will easily goes up to 80c or more if u continue stressing it.
beside that what test are u choose at prime95?

Sorry about that pic = =
I am using TT blue orb for my CPU and a few fan in my casing.... nothing special.... anyway i will restart and back to default setting first since it is melting....anything wrong with my setting ? why it is so hot....

For the stress test think is 2nd option.... I am new to prime95 also and the test running just now is primenet something i am not so sure...
Any comment
Hope my CPU is not on fever

---

Added on June 12, 2010, 9:28 pmPicture resized ~

---

Added on June 12, 2010, 10:00 pmLots of views but no reply

Just run stress test with original setting it goes to 68 C OMG.... the performance of blue orb so LOUSY ?

I am TT Blue orb II

This post has been edited by gn9746203: Jun 12 2010, 10:00 PM

blue orb is just a little better than the stock cooler, and it dont cold down a quad well, maybe lousy than the stock one on quad.. u shall get those with heatpipe such as hyper tx3 which around rm60 and will do much better than this, if budget not a problem for u can try TRUE which is damn good for quad
so u need a proper cooling and it will get u up to 3.2 or 3.4ghz easily..

so you think my setting is ok ? I am very happy when i made it to 3.0ghz
I get blue orb that time because i was modding my pc, that time i am not a hardcore gamer yet and blue orb looks nice

This post has been edited by gn9746203: Jun 13 2010, 01:17 AM

from the loading vcore at 3ghz, it look very good if it stable because 1.152v at 3ghz can consider low. a proper cooling u can goes up to 3.2 or 3.4ghz around 1.25-1.3v which is consider very low at 65nm core die.

Guess i understand what you mean but i just bought a CM GX 750W PSU + Sapphire HD5850, I am run out of budget~ Actually left RM30 for food and petrol

This temp is ok
In fact it is low enough not to worry about

my normal temperature for my cpu should be below 71 C according to intel....
although that is not so high during idel but heavy load already exceed

This post has been edited by gn9746203: Jun 13 2010, 04:47 AM

Don't need to worry
Your tjmax is 100 C so anything below is fine

ic.... but i think i will get a cpu cooler first ....

---

Added on June 14, 2010, 2:44 amfor my quad core processor... any recommended CPU cooler to maintain temp around 60 if i OC it to 3.4GHZ i guess.... Budget is rm200.... how about CM Z600 ?

This post has been edited by gn9746203: Jun 14 2010, 02:44 AM

you change PCIe clock also? normally people didn't change this clock.

You should use core temp for more accurate temp rather than asus pc suite

what is your ambient temp? while im using air cooler my temp was shoot above 90C whenever i stress it coz of high ambient temp, after i switch to watercool it never exceed 70C no matter how i stress it.