I think the day hand input might work but you will need a few things to be included.
1. The C6 chinese language from PNHT. Import it using the NFE.
2. The day hand input installer. Extract it into the cfw before flash.
3. The original APAC fonts into the cfw.

sorry bro... here never use any cfw yet, from v50 till v51 till c6 none of it really make me have the urge
do have study on those cfw though and just not sure why the chinese decoding not working if done properly
I'm sure it's working as lots of forumer already confirming they can read chinese but for writing input so far not yet seeing good success story yet...

personal experience http://forum.lowyat.net/index.php?showtopi...&#entry31611628

that what ppl wonder lah, there's not much different in term of hardware but why the hell C6 can perform sooooooo well compare with our tube...

check the rate and calculate... each lock require 5kb ~ 20kb

try to play the ringtone/msg tone that u set by the music player, if it can't play mean ur mem card corrupted liao loh....

but ppls saying itu SUN Global batt is a hoax leh...
technical point of view all same type battery have it's own capacity per weight (energy density), if those SG batt have about the weight then those hoax might be true

it will warm... especially u put it on some cloth or soft material where have bad heat conduction...

download > sign it > install > reboot




Attached File(s)
 101F8809_Camera_Sound_unsign.zip ( 815bytes ) Number of downloads: 10

ram eater...

reading no problem... writing need install extra input apps....

---

Added on September 14, 2010, 2:53 pmsun global is a hoax... get the original it possible...

This post has been edited by sklchan: Sep 14 2010, 02:53 PM

all cfw are hacked....

[quote=dD_se7en,Sep 14 2010, 03:18 PM]
[quote=sklchan,Sep 14 2010, 02:52 PM]
reading no problem... writing need install extra input apps....

---

Added on September 14, 2010, 2:53 pm

u repack the rofs2 ? then can read chinese and english, but cant write chinese ? u use TaiwanChinese_RM-612 ? or u use which 1 ?

after i repack then still like this, is this normal ?

[attachmentid=1779977]

[/quote]

I never use the c6 cfw so the detail i'm not sure, but from what i understand:

1. extract language files from the china c6 firmware
2. put all those language files into the rofs2 (from original PNHT c6 cfw)
3. repack the rofs2 then flash
4. install dayhandinput

only thing that need to remember is that later when new firmware arrive u have to re-flash back using the 5800xm v51 firmware before update...

bro... u memang cun lah.... thanks alot for this editing...