hi guys, please check if my line can support 4mbps or not. it says coverage in my area not available but im sure some ppl are using it nearby
the reason they give is that the exchange was further than 3km away but opposite my house got 4mbps.
anyway, im using 1Mbps now and suffering from it, dl speed of 400kbps and upload of 200kbps. was wondering if 4mbps will do any good

can teach me how to sync it to 1mbps then? i cant seem to find any option to adjust it to 1Mbps. This is default settings

sorry bro. uploaded. i hope now u can see them at least

im sorry i have to resort to this my connection is too slow to even open back the link earlier.

Mode: ADSL_G.dmt
Traffic Type: ATM
Status: Up
Link Power State: L0

Downstream Upstream
Line Coding(Trellis): On On
SNR Margin (0.1 dB): 291 280
Attenuation (0.1 dB): 570 315
Output Power (0.1 dBm): 136 116
Attainable Rate (Kbps): 5088 1076

Path 0 Path 1
Downstream Upstream Downstream Upstream
Rate (Kbps): 512 256 0 0

K (number of bytes in DMT frame): 17 9 0 0
R (number of check bytes in RS code word): 0 0 0 0
S (RS code word size in DMT frame): 0.50 1.00 0.0 0.0
D (interleaver depth): 1 1 0 0
Delay (msec): 0.13 0.25 0.0 0.0
INP (DMT symbol): 0.00 0.00 0.0 0.0

Super Frames: 384738 384739 0 0
Super Frame Errors: 0 0 0 0
RS Words: 0 0 0 0
RS Correctable Errors: 0 0 0 0
RS Uncorrectable Errors: 0 0 0 0

HEC Errors: 0 0 0 0
OCD Errors: 0 0 0 0
LCD Errors: 0 0 0 0
Total Cells: 7898053 0 0 0
Data Cells: 4986840 0 0 0
Bit Errors: 0 0 0 0

Total ES: 1 0
Total SES: 0 0
Total UAS: 10 10

is there any way i can increase the Line Att? Subscribe at 1Mbps pay 1Mbps but get 512kbps

no disconnection. already tried direct connection the speed is the same. shorter phone cables tried, tmnet been calling me everyday saying they adjusted their speed already. is it because of the copper wire outside?

im already at wits end. shared by 3 person with 512kbps speed. suffering.