I just got my DFI ULtra-D and a amd64 3000+ with totally new stepping LBBID 0509 winnie today......

hope to post result soon....

hehehe be patient....

My 2x512mb Hynix D43 cannot run 250fsb la.....

DFI ULTRA-D user mind to tell me your ram settings for D43 ?

I also one of the ocz vx value buyer in dinster's bulk.....let's hope we will get a good pair.....

hey....ask u guys.....if a good amd3000+.....by using stock vcore....how far can it goes usually ?

Here's mine , havent had the time to prime yet , i will prime soon.

ohhh it's normal for stock cooling ler bro.....

Now priming 260x9 @ 1.42 vdimm is 3.5......

For the tref , the best for the ram is 1168.

sure no problem.

This is the settings for 250fsb at 3.4vdimm

Enabled
2
2
6
2
7
12
2
2
2 * 2 for 250fsb at 3.4vdimm *4 for 260fsb at 3.6vdimm
1168
Auto / 1
Enabled
Increase
0
level 6
auto
auto
Fast
auto
256cycles
Disable
16x
7x
Disable

Btw , i'm using 510-2 bios.

My settings might not suit your ram. PLease do not be lazy to spend hours to tweak your ram. Trial and error is the key.

This post has been edited by winc87: May 20 2005, 11:05 AM

If the timing is too tight , u may loosen some timings to 3.

The xp120 doesnt cool your ram as good as putting a 80mm fan onto the fan directly....

i put a 80mm smartfan2 @ 4000rpm to cool down the ram.

I'm lucky to get good sticks.

I make it lying on the ram...make a 45 degrees...hehehe....it wont shake or watever, even when i set to full speed at 5800rpm.

Here we are talking about the CPU itself. So you should run small fft test.

Tell us if u manage to find those E6.

hehe very short run indeed. You might need to run at least 2 loops in order to prove that it is stable at that speed with the voltage given.