Bench @ 2.7Ghz
Dun think it's primestable...never test

Cooling : Freezer64 + Delta 5K rpm Tri blade + aircon + tablefan speed #3

Temps:

AMD 64/SEMPRON ---- OC DATABASE, Ocing results..OC problem?ask here..
|
|
Apr 13 2005, 03:34 PM
Return to original view | Post
#1
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei |
CBBHD 0447UPEW
Bench @ 2.7Ghz Dun think it's primestable...never test ![]() Cooling : Freezer64 + Delta 5K rpm Tri blade + aircon + tablefan speed #3 ![]() Temps: ![]() |
|
|
|
|
|
Apr 13 2005, 03:48 PM
Return to original view | Post
#2
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei |
QUOTE(jslut @ Apr 13 2005, 03:39 PM) Not really that good with the stock fan...it's at least 8C higher at the same vcore/speeds.Had to ghetto mount the Delta and this was done at an intake temp (probe near the cpu fan's intake) of 18C. Totally whack the aircon until the lowest reached temps. |
|
|
Apr 13 2005, 04:10 PM
Return to original view | Post
#3
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei |
QUOTE(neuvas @ Apr 13 2005, 03:51 PM) Yeah...was shooting for that whole morning. The best is only 31.063 Need to tweak the mem's more. QUOTE(jslut @ Apr 13 2005, 04:03 PM) but still, it's gotta quiute cool there to get that kinda temps. wat's the ambient temp room there?? Didn't measure as its under aircon....so can safely assume about the same as the HSF intake temp of 18Ci still have a long way to go to migrate to s939 |
|
|
Apr 15 2005, 12:23 AM
Return to original view | Post
#4
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei |
QUOTE(De_Cruelz @ Apr 14 2005, 11:40 PM) Thanks PCcrazy! I won't be water cooling the CPU yet until I can afford 2 X 6800GT's. After I get those cards then I will water cool CPU and the GPU's. For the time being I think I will only be doing benchmarks as the temps during load using stock cooling is almost touching 70C already! When all fails....when temps gets to ur nerves...There's one name that you can trust..... VANTEC TORNADO... One fan pwns all. ps: its sounding like an advert doesn't it? ![]() |
|
|
Apr 18 2005, 12:39 PM
Return to original view | Post
#5
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei |
QUOTE(rzonealley @ Apr 18 2005, 01:51 AM) base on what u saying i'm looking at our local forumers in Super Pi ranking. Yeah...on SPI alone...TCCD at 2.5-3-3-6 needs an extra 100Mhz to keep up with UTT at 2-2-2-5Evogenix and Sniper on the roof. both of them have almost the exact same setup but differ in type of ram. sniper on TCCD and Evo on UTT. Right now tight timing is leading the way on AMD setup. So its a good example for all the AMD64 user either going for TCCD or UTT. |
|
|
Apr 22 2005, 03:34 PM
Return to original view | Post
#6
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei |
QUOTE(gengstapo2 @ Apr 22 2005, 07:58 AM) my processor damn hot!! just running at 205x11 & vcore only 1.4. can reach up to 69c full load. just modd my freezer64 put original AMD fan & P4 fan around hsf, then only reduce only 4c!! what a joke. maybe x-120 will be my next HSf. QUOTE(gengstapo2 @ Apr 22 2005, 09:41 AM) Ambient and Casing temps?Seriously, I'm using Freezer64 as well with a Winnie. I don't even get that kinda temps at 1.76vcore Right now...am running at 30C with CnQ on...Load 39C @2.2Ghz. Ambient temps = 27C |
|
|
|
|
|
Apr 22 2005, 04:26 PM
Return to original view | Post
#7
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei |
QUOTE(gengstapo2 @ Apr 22 2005, 04:18 PM) i dont use my side panel. just leave it barely like tat. oso same problem. become worst if closing side panel. im using i-cute atx wif one hole on side it. Try taking out ur casing...put it on the table in open space and test again.It seems HIGHLY likely it's because of the confined environment/ poor air circulation that ur rig is on. |
|
|
Apr 29 2005, 03:58 PM
Return to original view | Post
#8
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei |
QUOTE(PCcrazy @ Apr 29 2005, 10:42 AM) QUOTE(hazremi @ Apr 29 2005, 02:52 PM) here's mine 53sec spi's really really really bad dude. Even at default 1.8ghzt should do about 49 (if remembered correctly 2.35ghz@ 1.575v , 3000+ winchester ![]() an update coz in the previous screenshot the cpuz is not clear..a bit jagged.. ![]() |
|
|
May 12 2005, 03:08 PM
Return to original view | Post
#9
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei |
So.... It HAD BEGUN.
Dude...PcCrazy's got a great idea. Why dun you start a sort-off log thread? Can even think of a title for ya... The Road To Venice. Good Luck...and May the Force be with You. |
|
|
May 18 2005, 05:23 PM
Return to original view | Post
#10
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei |
Deleted. Redundant
|
|
Topic ClosedOptions
|
| Change to: | 0.0373sec
0.73
7 queries
GZIP Disabled
Time is now: 1st December 2025 - 09:04 AM |