hi...im new here can anyone help me optimize my setting? hhahah sorry for using sucs ram no money now..

below is my current setting, now testing for prime95..

me cannot boot when using 1T.. emm act 1T is wat leh...

now running prime 95, jus increases d setting after stable for 2ghz.. now d overall setting is ok a? i can really feel d diiferent after chosing this memory timing... everything load too fast..

here is wat ive done.. gonna increase d speed later and buy much better ram..




This post has been edited by low yat 82: Nov 1 2005, 02:46 PM

ai...dun understand ler.. can xplain a... this mobo than act is urs la?

then y this mobo dun flash to d latest bios yet geh??


This post has been edited by low yat 82: Nov 1 2005, 05:06 PM

now trying out 1T (3-3-3-8) setting wit 2.242 Ghz stock voltage, still running prime..

oic... no wonder dun flash d bios la... anyway, does d latest bios much better than last time(d one im using)?

a proc wit all running stock shud hav a life span of 10-15 years (forgot where i read liao)
if oc kau kau also, i think 3 years will b no prob.

afterall, amd got 3 yars warranty ma...

u r using other psu a? coz below ur sig show u use real power cm 450w. if use chaplang, better dun oc to high,but really recommend u use much branded one, use chapang one, its will decrease much as much longer u power on ur rigs and it will fluctuate too..

if im not mistaken, from some place i read, if oc it will increase wattage usage about 20-30w. i see can find d website for u or not.. it use to calculate wattage needed for ur rig...

cheers

at last , can find it.. http://www.extreme.outervision.com/index.jsp

hav prob here, y i can run prime small fft till ab half hour wtil not hang, but if run blend test iss onli take not more than 15 min already hang? so which i shud follow? does mine can clasiified prime stable if can run smaall fft morethan 3 hours?

This post has been edited by low yat 82: Nov 22 2005, 02:37 AM

i can think small fft will stable.. so, if my blend test fail, that means its causes by d ram lor... but d ram runs at stock speed wor... wit 2.8v

u hav to run prime test to confirm its stable. jus like staed in d firt post..

k... sorry makin d mistake..

wa... u r using wat fan, y d speed 7000+..

This post has been edited by low yat 82: Dec 27 2005, 10:03 AM

sempron64 2800+ is multiplier locked..

or do u mean fsb/ram ratio?

wa... using d rigs below at ur sig, wit jus 300w???? can hande meh?somemore great gc... wat psu u using?

hmm.. i hav found out somethin...
where every1 says dual rails is very important( can supply more than 20ampere at 12v. wit each rails if not mistaken cannot exceed 20ampere) ->

power supplied to proc= vcore x ampere

dual rail -> 1.4 x 25 =35w
single rail -> 1.8 x 20(max) =36w

so, v core for single rail need to b set 1.8 in order to get same power produced by dua rails.. but, does it will generate same heat if assume both generate same power...

so,wats act d important of dua rails...

p/s : sorry if ask at the wrong place..

u r using msi mobo izzit? tyhey dun got software to monitor ur vcore meh? i think cpu-z can trust gua...

mine also 15A for 12v.. but will buy dua rails soon and start my oc again

plz update mine, category sempron64 s754, stock coolin, vcore=1.5v.. info at my sig..



This post has been edited by low yat 82: Jan 5 2006, 12:38 AM

wats ur specs? i mean mobo.. u ever update?