hi guys... i'm very very new to OC stuffs.. okay this is my 1st time trying to OC my proc.. i'm using AOD (AMD OverDrive) to OC my proc, for wat i get rite at 3.8GHz the proc temp showed in core temp is around 60-61 celsius, is that save for my proc?? wat i noe the max temp for the proc stated at the site is 62 celsius...

[Edit]
i think i causes some confusion here... my idle temp at 40-42 at non A/C room, load temp at around 60-62 also at non A/C room.. this should clear the confusion out there... thanks

This post has been edited by bryant601: Apr 16 2010, 09:13 AM

i dont think so. best is to get ur temp at around 40 max.

i mean idle temp its around 40 at non A/C room.. load temp will be at 61, is tat okay??

You own DeepCool Ice Blade Pro and Cooler Master CM690
and ur cpu temp at 61ºC.. wow
must be something wrong there, how bout ur stock cooler temps? 80ºC ?? fry fry fry.. egg oso can.

Overclock thru BIOS is most recommended. an early alert can be deteted also if you using BIOS to OC. Such as BIOS wont start or post.

Overclock thru windows (A.K.A on-the-fly method) application not to say cannot, but it is safer to do thru BIOS.

After OC, 40c idle and 60c full load is safe temp for a aircooling cooler.

You can check from the vendor website for safe temp and max temp for each individual procs.

Regards.

seems ok to me...and u not stated ur vcore..

btw go to existed amd OC tered.. and remember to post some SS..

is the vcore save?? i noe for the proc rite the vcore should be around or less than 1.5V rite?


Attached thumbnail(s)

refer to your procs type and your setting, everything is clear

http://products.amd.com/en-us/DesktopCPUDe...&f11=&f12=&f13=

r u enable CnQ while on OC setting?

should the CnQ be disabled in BIOS??

thread closed. please use existing AMD threads please!