Just a prank apps

Anyone tried CoreDamage?
Run it for 10 minutes, only manage to bring to 50C

This post has been edited by lee_what2004: Apr 22 2010, 09:40 AM


Attached thumbnail(s)

@lee
Does CoreDamage really stress the CPU much?? Better than OCCT ..

@highwind
Well, before this weiyap aka Poison already managed to installed Leopard in his S41.5 ..just that the problem with WiFi & Sound Card IINM ...

This post has been edited by miahahaha: Apr 22 2010, 10:04 AM

yesterday open s42 up again, tried to apply 1cent mod to GPU mod, failed again, still, gap too small..had to use back thermal sticker

put back also, dunno why idle temp increased by 1C liao, and i tested furmark with 8x MSAA with my cooling pad, got 94C after 3-4 minutes...maybe last night my aircon not cold enough

but i tried some overclocked setting on PCSX2, before this that setting was giving me 81-84C liddat, and yesterday i tried, it's 77C~81C liddat...still very nice

also, i notice, our CPU aint using thermal pad, it's using thermal paste..that's why the cooling for CPU before this is quite good already XD

@BBX
Your room when testing using FurMark is air conditioned + cooler, temp @94C runs 3~4 minutes?...well, that's quite ...in air con room should be around 90C no

lap the 1 cent 'til thinner?

i guess my thermal paste for CPU is already out liao..now my CPU runs hotter than my GPU sometimes...even now, CPU@60C while GPU@61C ...what happen liao

---

Added on April 22, 2010, 10:26 amahaha ^^...BBX lazy one to do this

This post has been edited by miahahaha: Apr 22 2010, 10:34 AM

Just tried OCCT, only 47C, CoreDamage still do more damage


Attached thumbnail(s)

lolz...
miahaha knows me well

btw for the temp, not really mah....Dirt 2 98C also is air con room with cooling pad ler..i got see without cooling pad i think i saw 3 digit value on temperature before...quite scary
furmark also, last time i didnt really try on cooling pad, but i think it would be also 98C or so la, it's due to the less efficient heat transfer of thermal pad

---

Added on April 22, 2010, 10:31 am@lee: try intel burn test?

This post has been edited by BBXiong: Apr 22 2010, 10:31 AM

If like that quite ok lor....maybe i test with FurMark also see what the result is ..

---

Added on April 22, 2010, 10:36 amWill try CoreDamage & OCCT for my CPU also ..

This post has been edited by miahahaha: Apr 22 2010, 10:36 AM

since 1 cent didn't fit, what about aluminum foil and fold it into square like thermal pad?

running intel burn test now, so far highest is 45C
running F@H also around 44-45C...

This post has been edited by lee_what2004: Apr 22 2010, 10:48 AM

duwan use aluminum foil la..just use back thermal pad until i found another better solution

---

Added on April 22, 2010, 10:46 ambtw how much heat will the GPU ram generate? normally it's gonna be lower compared to GPU? how much would it affect if it has better cooling also?
if just minor boost then i think i wont be bothered...

This post has been edited by BBXiong: Apr 22 2010, 10:46 AM

Well, test CoreDamage for 4 minutes, this is what i get ....

---

Added on April 22, 2010, 10:49 amWill test FurMark after this...4 minutes or more

---

Added on April 22, 2010, 10:50 am@BBX
i dun think GPU RAM would be much hotter than normal ones ..but not quite sure

This post has been edited by miahahaha: Apr 22 2010, 10:50 AM

i been wanting to ask long time edi..what is ACPI temp?

The old way to measure the overall temp of the cpu...

This post has been edited by lee_what2004: Apr 22 2010, 10:54 AM

oic...how come so much scarier then the actual core's temp one..izit inaccurate?

haha ^^...run FurMark for 5 minutes, and guess what i get...OVERHEAT SHUTDOWN liao ..forgot to watch the temp went up to 108C and shutdown ..

---

Added on April 22, 2010, 10:58 amCooling my laptop down now...and will test again after this

---

Added on April 22, 2010, 10:59 ambtw, running FurMark in a room with temp around 27C and without cooler ...no fan, no air con...

This post has been edited by miahahaha: Apr 22 2010, 10:59 AM

Not sure about that, but I used it to measure the Pentium M and below...

furmark can run on GMA?

cancelled intelBurnTest, seems like not rising from 45C...

This post has been edited by lee_what2004: Apr 22 2010, 11:02 AM

eh mia, what setting u use in furmark? i need to go home and test as well liddat

@BBX
My setting is 1024x768, MSAA 2x (Stability Test)...just use that for FurMark...

jeez...i used 1024*768, xtreme burner, 8x MSAA...

later i go home test without cooling pad and air con also..let u know the temp later tonight