Outline ·
[ Standard ] ·
Linear+
Hynix RAM Discussion
|
amok
|
 Apr 25 2005, 04:50 PM
|
schhhhwwiiiiiiinggggggg
|
QUOTE(PCcrazy @ Apr 22 2005, 05:32 AM) Guys i have a good news for cheap btd43 owners... some guy here suggested that burning in btd43 would result in no increase in performance...but that doesnt applied to me.. These last few days, i ve been running a burn in session with 2.85vdimm for few days---my result before burning in was a decent 264htt.. After a few burning in session, i manage to break 265 and now 2hrs walltime running at DDR540 (270htt) stable so far....i dunno how far this chip can go..but im expecting it to reach max at 275..hopefully..running at 2T of course..Have yet try running 1T hey good burn in..  what test no u using and how many errors? |
|
|
|
|
|
PCcrazy
|
Apr 25 2005, 05:48 PM
|
|
|
QUOTE(amok @ Apr 25 2005, 04:50 PM) hey good burn in.. what test no u using and how many errors? i manage to run memtest stable at 275htt all test stable for 14hrs.. and test no5 stable for also 10++ hours.. so i can conclude: 275htt @ 2.5-4-3-8 @ 2T @ Dual Channel @ 512 x 2 Impressive for rm350 ram... This post has been edited by PCcrazy: Apr 25 2005, 05:58 PM |
|
|
|
|
|
e-jump
|
 Apr 25 2005, 05:52 PM
|
|
|
madness... i hope i got a spare rig to burn in a week, n wish it'll go 300  p/s: now only 265 1T, 272 2T :? This post has been edited by e-jump: Apr 25 2005, 05:54 PM |
|
|
|
|
|
PCcrazy
|
Apr 25 2005, 05:59 PM
|
|
|
i would prefer 265 1T anyday vs even 300 2T.. urs a gem..have to admit that....  |
|
|
|
|
|
amok
|
Apr 25 2005, 05:59 PM
|
schhhhwwiiiiiiinggggggg
|
QUOTE(PCcrazy @ Apr 25 2005, 05:48 PM) i manage to run memtest stable at 275htt all test stable for 14hrs.. and test no5 stable for also 10++ hours.. so i can conclude: 275htt @ 2.5-4-3-8 @ 2T Impressive for rm350 ram... .. now you make me in the mood of burning in again  . wait till my rig is rebuild again... previosly got till 260htt@2.5-3-3-8 @ 2T@2.8Vdimm |
|
|
|
|
|
jwyj
|
Apr 25 2005, 06:33 PM
|
|
|
I bought 2 x 512 DT-D43 cannot reach 200FSB dual channel in NF-7. Today I received 2 x512 BT-D43 still cannot reach FSB200. Any helpful hints other than single piece? Change mobo?
|
|
|
|
|
|
e-jump
|
Apr 25 2005, 09:01 PM
|
|
|
be patience my friend..
try manual timing config 1st
its a lil tough for u coz nf2 boards didnt like so much to pir it with double sided rams
|
|
|
|
|
|
SUSceo684
|
Apr 25 2005, 09:24 PM
|
|
|
Um.. at 2T, how fast fsb can I expect to go with CL2 timing with BTD43 and voltage ~2.8/9v?
|
|
|
|
|
|
epsilon99
|
Apr 25 2005, 10:12 PM
|
|
|
QUOTE(jwyj @ Apr 25 2005, 06:33 PM) I bought 2 x 512 DT-D43 cannot reach 200FSB dual channel in NF-7. Today I received 2 x512 BT-D43 still cannot reach FSB200. Any helpful hints other than single piece? Change mobo? Your NF-7 is which version ? The Nforce II mobo chipset got 2 version. The 400 and non-400 version (earlier one). The 1st batch of NF2 chipset was only rated 333. |
|
|
|
|
|
SUSceo684
|
Apr 27 2005, 12:14 AM
|
|
|
nobody runs these things at CL2 wan ar?  |
|
|
|
|
|
PCcrazy
|
Apr 27 2005, 08:55 AM
|
|
|
26 errors after 68 passes is good already...
Stick with that la...u wont even notice the RAM is a bit unstable...
|
|
|
|
|
|
Mr_47
|
Apr 27 2005, 05:48 PM
|
|
|
which one d43 module is good? single side or double side?
i hav 2*512 double side d43(BT+DT) .
i just saw new and cheap d43 nowdays use single side!.
|
|
|
|
|
|
sidewinderz
|
Apr 27 2005, 06:05 PM
|
|
|
haha...got myself a pair of BT-D43....manage to clock it to 260 FSB... timings are 3-3-4-4-10 |
|
|
|
|
|
SUSceo684
|
Apr 27 2005, 09:19 PM
|
|
|
Whos using what version and berapa sides chips? Can we have a D43 owners thread? Im using 2x512 Apacer BT-D43 double sided |
|
|
|
|
|
intrexpo
|
Apr 28 2005, 01:23 PM
|
|
|
intend going to buy KVR BT-D43 and DT-d43..
where can get it in LYP ??
Single side or double side...
Abit NF7(V1 or V2 ?) is good mobo to oveclock Sempron 2200 rite ??
|
|
|
|
|
|
PCcrazy
|
Apr 28 2005, 06:20 PM
|
|
|
I have bad news for soon to be KVR btd43 owners..
The new btd unable to live up to its name anymore...
The results are not consistent---if u r looking for btd43 look for old one instead of newest..
I have one btd43 here capable of pulling DDR550 @ 2.5-4-3-6 @ 2T @ 2.85v..
The new doesnt even manage to do DDR 480 @ 3-4-4-8 @ 2T
Buying right now is like gambling a bit---lucky if u got DDR500 capable d43..
This post has been edited by PCcrazy: Apr 28 2005, 06:20 PM
|
|
|
|
|
|
intrexpo
|
Apr 28 2005, 07:02 PM
|
|
|
wauuu...if want to buy new one..
which chipset and code should we refer to ??
|
|
|
|
|
|
yuckfou
|
Apr 29 2005, 02:25 AM
|
|
|
find hynix chipset.
look for the last few codes.
look for either bt-d43 , or dt-d43.
if possible ask for older stocks since the new batches are not performing well for OCing.
|
|
|
|
|
|
jiant
|
Apr 29 2005, 09:16 PM
|
|
|
QUOTE(PCcrazy @ Apr 28 2005, 06:20 PM) I have bad news for soon to be KVR btd43 owners.. The new btd unable to live up to its name anymore... The results are not consistent---if u r looking for btd43 look for old one instead of newest.. I have one btd43 here capable of pulling DDR550 @ 2.5-4-3-6 @ 2T @ 2.85v.. The new doesnt even manage to do DDR 480 @ 3-4-4-8 @ 2T Buying right now is like gambling a bit---lucky if u got DDR500 capable d43.. how about the new batch of dtd43?is it good as before or already no as good as before? |
|
|
|
|
Quote
0.0179sec
0.67
6 queries
GZIP Disabled