what size of that blue fan bro????

and price for it?

it is 12cm...

---

Added on April 26, 2010, 1:00 amit comes with the case... slow and very low cfm, now 1 of the led started to blink2...

This post has been edited by captvizcenzo: Apr 26 2010, 01:00 AM

it's look bigger than that...

i looks bigger, but definitely 12cm...

so what are you gonna do next bro????
paint your case???
n how is your new card???

just arrived at sek 18 just now, left my rig edi, missing it now...
next is to change the noisy stock cooler... (eta july)
lazy to paint it, i think will leave the stock color...
satisfied with it rite now, 60++ BC2, 70++ Dirt2... (@1440x900) metro 30 and below...

you study lg ar bro????
is it all game in max setting???
i get 40fps in metro but in 1240x1028 reso...

aah, intec uitm...
yup, all max...
metro all max, only the af not 16...

Some new mods on my rig... (done on June 28)


Stock cooler...


Stock cooler removed... My processor stuck at the heatsink when I removed it, used a knife to peel it off Forgot to take the picture.


The mighty shiny Venomous-X(bought fromclawhammer


Venomous-X installed with 2 Xigmatek fans


HDD cage fully removed


Xigmatek 14cm fan installed in the 5.25 bay

Lowest idle temperature achieved as for now is 32 degree Celcius, compared to 39-40 before...

m@d@_lo0s rig's This mod was made by we ourselves.
Equipment:
1. Hitachi grinder
2. Bosch drill
3. Cutting disc (for rotary tool like Dremel, but we used it with a drill), bought from niclasteoh
4. Cutting disc for grinder


On the way to make a round hole for fan outlet


Done with the holes. Notice that the rectangle hole is for the over-sized Hyper 212+... (this is an old Compaq OEM case BTW)


Finishing touch by m@d@_lo0s himself, edge protector was bought from niclasteoh


Hyper 212+ (bought from moderno) to replace the stock cooler. Load temp with stock cooler was 100 C Now Hardly reaches 50 C

This post has been edited by captvizcenzo: Jul 2 2010, 04:06 PM

nice

but gonna let d hole exposed like that r?
how bout attaching fan grill or clear acrylic using raised mounting screws...put a couple of washer to raise d grill/cover form side panel
juz my 2sen

Yup, that's what he has been thinking of, acrylic and some spacers.

nice mod..

Thanks for the compliment...