well just to prove metalzone point on pelt

Test Setup
x6800 3.2ghz 400 x 8 @ 1.3 V
Gigabyte N680SLi Dq6 - Stock Voltage on Chipsets
Team Xtreem PC2-6400 3-3-3-8-1T 2.35V 1x2gb
Coolit Freezone At Max.
Ambient Temp Around 36C... freaking hot afternoon just now.

(Ambient temp by the metrological department of malaysia is conducted in shaded area .. to check the temps of air and not to be influence by uv rays etc )

Core 1 Temps [attachmentid=237061]
Core 2 Temps [attachmentid=237062]
Mobo Temps [attachmentid=237063]
Vcore Reading [attachmentid=237066]

Verification [attachmentid=237068]

Idle temps are good but load a different story
Actually performance wise i would say get a tuniq tower with Silverstone FM121 and u can beat this except for some reason my mobo temps are much much cooler with the coolit and therefore i can overclock the bus speed right to 480 at stock voltages on nb,fsb everything...

This post has been edited by cstkl1: May 25 2007, 05:06 PM

caution dudes
occt is fine and dandy but still i trust in orthos

i use occt just for the graph thingy with speedfan to check out when the proc fails what the vdroop was...and from there adjust my vcore.
overclocking made easy...kekeke..

btw check out op1000 ..kekek and some volt mod on this mobo... 1.3 all the way..kekek without any fluc at all.
also btw theres a temp sensor on the 9inch fan..
it wont let the freezone to drop the temps below ambient.

---

Added on May 27, 2007, 8:12 pmpast few days i keep wondering if the temps are like it was stated above..

y the freaking hell i keep having condensations problem.
the water block is like freaking cold and has signs of a bit of condensation on idle... l
and the coolit the blue metal part like having water vapour on it.
and the water tube thats going in is also very cold.

theoritically if the water that goes out from the hsf and comes back in the difference is the estimation of how cool it is...

so i put a temp sensor like smack in the middle of the water block... idle 23 , load 35...

so anybody can explain to me this??
is core temp wrong???

This post has been edited by cstkl1: May 27 2007, 08:12 PM