just fixed up my DFI nf4 ultra-d with vitestas ddr 500 and x850xt pe last nite..everything boot up nicely...running pretty fast(compared to my p4 3ghz) and 3dmark2005 came up nicely at 6.2K...apart from the major gripe about the bridge heatsink being placed too close to the pci-e slot, not much complaints...oh yeah..and the funny pattern of having the DIMMS in slot 1 & 3 ONLY for dual channel..doesn't make sense ....will try OCing tonite and see how much I can go...currently burning the stuff in....hope things will go well

sorry didn't browse thru this forum for quite a while...i bought it from viewnet at a price of RM700.00 two weeks ago....

from my own experience, i bought my enermax 465 watter ATX v. 1.2 (i think) with 33amps on my 12v rail almost 2 years ago...that time got no 24-pin connector mobos (or so I thought) so i curi my friend's 20-24 pin connector and connected it to my DFI NF4 Ultra-D...no problems at all, still running stock on 3/10 BIOS though. Memtest86 found no errors on my adata vitesta ddr 500 at SPD (3-4-4-8) and all running on stock. Will try OCing it tomorrow to see how high I can go...

hi...anyone knows the best timings for UTT RAMs on a DFI Ultra-D?or any links that I can look it up? Thx!

running as attached pic with 3.4v for VDIMM (235mhz@2-2-2-5) and 1.678v for CPU...is that oke??temp for CPU with super pi running for around 15 mins is at around 56 degrees...currently running stock cooling with AS5....is that CPU temperature oke??42degrees is at idle temperature....


Attached thumbnail(s)

how much for the ddr booster???

i have a weird problem with my rig ever since i switched the jumper to the 4v vdimm...everytime i start my comp, my monitor won't power up at all...need to restart (by pressing restart or shut down then restart) then only the monitor will power up....if not, it will just go to standby mode...but once clear cmos, everything back to normal...running 3.4vdimm and 1.45vcore...anyone got this prob b4?

i got mine, siggy as below for RM 379 (around there) from All IT hyperstore at lyn...good PSU at that price...split 18amp +5v rails for a total of 35amps...

how you managed to solve that problem??what's your actual cause of it?i know once clear cmos, everything back to normal...hmmm

shud b different problem le...mine off 24 hours, on again still same problem persists..nothing major, just that irritating coz need to restart once cold boot up...

yup...definitely gonna do that later on today or tomorrow...i have a sneaky feeling that the jp17's the culprit...thx m8

donno whether old news or not but at all IT hypermarket, still got the 600w noisetaker there...

i saw it last saturday(just the past saturday)...not enough money to buy that so bought my 535watts enermax...should be new stocks kua....

how come the stock HSF is better than the vantec iceberg????

i just bought the ocz ddr booster and had to transfer my rams from the orange slot to the yellow slot and the booster in the orange slot...however, when starting my comp, the msg that i need to put dual channel rams in the orange slot keeps coming up...how to get rid of that?running DC in yellow slots seem fine to me...

where to get those BIOS?beta?mine is at 3/10 and that's the latest one from DFI's website

thanks!!all the drivers i need for my mobo

wow...cool stuff wonder where i can get one of those...stoopid HSF blocking my arctic silencer...

yup it's on the first slot...not using silencer leeee...using the TT giant 3 cooler...

yah man..with the silencer, totally cannot fit into the PCI-E slot as the chipset fan is blocking the back end of the fan(the roundish part)...correct me if i am wrong, but the arctic silencer is the same as the HIS silencer, no?

yup..that's right...but from my HIS, first of all, the HSF is facing downwards, away from the CPU...but mine protrudes towards the end of the card and towards below the card...one day i go take a pic of it and see how to rectify that...