DFI nF3/4 series (LP and Infinity) users come in, Overclocking ability and troubleshooting
|
|
 Aug 23 2005, 01:46 AM
Return to original view | Post
#1
|
 
Junior Member
264 posts Joined: Apr 2005 From: Subang Jaya  
|
QUOTE(Westley @ Aug 20 2005, 06:54 AM) problem solved... Got TCCD too...what bios version are u using? juz something related wif the timing and voltage of ram...  Tried 310 and 702-2 which were unstable,the only stable bios for me is 623-2.. U guy's? |
|
|
|
|
|
Aug 23 2005, 03:15 PM
Return to original view | Post
#2
|
|
Junior Member
264 posts Joined: Apr 2005 From: Subang Jaya
|
Hem....i'm using Corsair 4400C25PT
Vdimm 2.8V 2.5-3-3-6 at 250 Prime Stable for more than 2 hours, but didn't have the patience to wait longer  Trying to go Prime stable with higher settings.... |
|
|
Sep 24 2005, 10:29 AM
Return to original view | Post
#3
|
|
Junior Member
264 posts Joined: Apr 2005 From: Subang Jaya
|
QUOTE(antonio_zth @ Sep 19 2005, 12:05 PM) Vantec Iceberq + overclocked 250 HTT 1.6v CPU 3.2v Ram 1.6v Chipset = 38c (idle) 41c (Full load) Did u use AS5? all values are achieve using full blast of the Vantec Fan and some cool air from CrossFan (Stacker's Mobo Fan) I did a polish of the old heatsink took out the steel plate paste some AS5 and running a vantec 82mm fan, idle at 38-39, load at 41-43... also running XP90c HSF...but i think using vantec iceberg should have a better temp, maybe the AS5+polish?  Edit: this is at 260mhz running on stock chipset heat sink.... This post has been edited by DaBaD: Sep 24 2005, 10:38 AM |
|
|
Sep 24 2005, 10:47 AM
Return to original view | Post
#4
|
|
Junior Member
264 posts Joined: Apr 2005 From: Subang Jaya
|
Buy from forumer ar bro rm25 aje
at lowyat rm35 i think... But i think vantec iceberg+AS5 = Super cun cooling!! but tak tau ler...antionio paste ar AS5 skit pastu tjk ar result |
|
|
Sep 24 2005, 10:53 AM
Return to original view | Post
#5
|
|
Junior Member
264 posts Joined: Apr 2005 From: Subang Jaya
|
QUOTE(antonio_zth @ Sep 24 2005, 10:47 AM) the fan mebbe wanna die aledi...nevermind if die got reason to change to vantec iceberq 4 aledi Just read from DFI Street mod of Vantec iceberg as chipdet heastsink It looks like they changed the fan of the vantec and instead use the fan from the stock chipset cooler coz the stock chipset fan has more power+rpm!! Ape lg Antionio,it's modding time!!!! This post has been edited by DaBaD: Sep 24 2005, 10:54 AM |
|
|
Sep 25 2005, 12:32 AM
Return to original view | Post
#6
|
|
Junior Member
264 posts Joined: Apr 2005 From: Subang Jaya
|
QUOTE(antonio_zth @ Sep 24 2005, 11:12 AM) gua main water lahh.... Aik bukan ko ckp ko guna vantec hsf as chipset cooler?   |
|
|
|
|
|
Sep 26 2005, 07:30 PM
Return to original view | Post
#7
|
|
Junior Member
264 posts Joined: Apr 2005 From: Subang Jaya
|
QUOTE(antonio_zth @ Sep 26 2005, 03:20 PM) nop...last time i used the vantec to cool my chipset but i noticed when i use two times the vantec both my mobo kong... That's where the spung of the old chipset heat sink comes in very handy and is an important item!!! when look back the vantec needs a very tight clips to make sure the chipset cooler surface are intact with the chipset... ATTENTION!!! to make sure ur chipset receive 100% heat trahnsfer to the Vantec Iceberq make sure the cooler is stack up really tight and check the gap throughly b4 u fire up your system..Failure to do so will kill ur chipset... |
|
|
Sep 30 2005, 01:25 AM
Return to original view | Post
#8
|
|
Junior Member
264 posts Joined: Apr 2005 From: Subang Jaya
|
QUOTE(wild_card_my @ Sep 29 2005, 06:21 AM) Btw, I'm only using this 20 pins connector PSU, can I still use the DFI boards? DFi Ultra-D/SLi-D and DR need 24pin PSu and a minimum of 480watt for the mobo( 12v need at least 24amp if i'm not mistaken) read at dfi-street regarding the PSU it's a VERY important topic..http://www.tigerdirect.com/applications/se...o=1028626&Tab=5 Some Interesting Links http://forums.extremeoverclocking.com/show...ad.php?t=136602 http://www.dfi-street.com/forum/showthread.php?t=10854 EDIT: Also the Vantec iceberg thingy u can drill it they got a guide at DFI-Street(My No.1 Reference for DFI ) to install the Vantec hsf...This post has been edited by DaBaD: Sep 30 2005, 06:40 AM |
|
|
Oct 7 2005, 09:38 PM
Return to original view | Post
#9
|
|
Junior Member
264 posts Joined: Apr 2005 From: Subang Jaya
|
QUOTE(gengstapo2 @ Oct 3 2005, 10:22 PM) ** well, juz settle my prob. mostly i feel the prob is my mobo(WTF!). but, if using BH-5, can do dual-channel, using tccd kenot Yo bro, settle or not ur prob?  juz re-assemble my rig but using asus(k8t890), but the ram working juz fine in dual channel. kenot understand leh y this happen?  I suggest try looking at DFI-Street |
|
|
Oct 15 2005, 08:23 PM
Return to original view | Post
#10
|
|
Junior Member
264 posts Joined: Apr 2005 From: Subang Jaya
|
time to get expert
|
|
|
Dec 26 2005, 07:55 PM
Return to original view | Post
#11
|
|
Junior Member
264 posts Joined: Apr 2005 From: Subang Jaya
|
whats the power of the fan? High amp fan are NOT for the mobo connecters on the mobo, and they can damage the mobo in some cases...using a 4molex pin on the psu is much safer,and the fan can recive full power...
|
|
|
Apr 5 2006, 01:40 AM
Return to original view | Post
#12
|
|
Junior Member
264 posts Joined: Apr 2005 From: Subang Jaya
|
Actually providing better cooling for the chipset will provide better stability to the board
It has been discuss at DFi-street before This post has been edited by DaBaD: Apr 5 2006, 01:41 AM |
|
Topic ClosedOptions
|
| Change to: |  0.0498sec
 0.30
 7 queries
 GZIP Disabled
Time is now: 14th December 2025 - 10:39 PM |
Quote