wuts the best formula for cpu-nb frequency when ocing the cpu frequency(965 BE), and also the voltage formula for the current clock of cpu-nb frquency (AM3 + DDR3 platform)?

---

Added on June 19, 2010, 11:33 pmcurrently using cpu-nb freq = (cpu freeq*2) / 3.15

This post has been edited by selferino: Jun 19 2010, 11:33 PM

the best n fastest way to test the OC is stable thru prime95 and to check whether its satble wif the cpu-nb is thru fft length of 512k right?

This post has been edited by selferino: Jun 19 2010, 11:45 PM

do i need to play around wif the HTT link speed and voltage? coz never saw anytin bout tat in the phenom II guides..

HTT link speed n HTT is the same thing ryte? n i shud juz leave it at default 800MHz value eh? btw since im not touching or OCing the ram at all( BE proc ma), i dun have to blend in prime95, juz the normal in-place large fft onli ryte?

---

Added on June 20, 2010, 12:22 amor ur HTT u mean the FSB?

This post has been edited by selferino: Jun 20 2010, 12:22 AM

check my siggy for wut mobo im using msi 770-c45

---

Added on June 20, 2010, 12:35 amowh yeah not 800Mhz, its 2000Mhz, same like cpu-nb freq, at 200MHz*10

This post has been edited by selferino: Jun 20 2010, 12:36 AM

owh typo up above, did not mean HTT link, but HT link multiplier and volt

---

Added on June 20, 2010, 12:38 amso repost question with correction, do i need to play around wif the HTT link speed and voltage? coz never saw anytin bout tat in the phenom II guides..(not talking bout HTT or cpu-nb)

This post has been edited by selferino: Jun 20 2010, 12:38 AM

juz rebooted( now tryin to stable my 3.9Mhz on win7 64 bit), i rebooted coz my HT link on cpu-z was 800Mhz, so went tobios n see the multiplier was auto, so i change to x10 to 2000MHz, wish me luck, do giv me tips if any tq

---

Added on June 20, 2010, 12:47 amweird disable CnQ oso the HT link is drooping to 800Mhz, wat la u mobo MSI!

This post has been edited by selferino: Jun 20 2010, 12:47 AM

takpe bkn nk OC 24/7, so far pakai 1.45 cpu volt max jer, skunk 3.8 dh boleh, 3.9 jer blue screen nie, tweaking2...

---

Added on June 20, 2010, 1:08 ambtw wuts the difference between CPU-NB VDD Voltage and CPU-NB Voltage?

This post has been edited by selferino: Jun 20 2010, 01:08 AM

yes, succesfully burn my mobo(i think coz suddenly shut down during priming), haih tangan gatal sgt nk stablekn 4Ghz on my proc till kt bios Vcore set 1.55v ( thou everest n Hwmonitor shows 1.6v), tested my ram, gc at my fren comp still working, tried his psu at my comp, same case not booting( yes already did clear CMOS), now not sure yet whether my proc, my mobo, and my psu is still ok. Mobo confirm dh out dh, tp proc ngan psu xtau lagi, xde tempat nk test, haih....dh stable 3.9Ghz gatal nk kejar 4Ghz, haih....::

burnmark on the mobo ke? how 2 see eh? do u think sumhow my proc still ok( no am3 board lying around to test, my fren using i5) ?

fuh, so i can safely say my proc n psu is ok la kan? the burn marks got pic example?

can i check physically on the proc to see whther the proc got burn mark/still ok onot?

how bout the proc bro?

update: no burn marks on the back of the mobo(cou area) and also no burn mark at the pin of the proc, any idea( jgn cakap dlm chip proc ak rosak)?

btw info, the last tyme i was in bios, i set the CPU-NB volt to 1.4v.
and also 1st tyme wif all my current setup(after the incident),if leave for a while try to on back the fans tat r connected to my mobo(blue LED) will run for 1 sec thn gone off, n duh xleh on the pc lngsng, juz extra info..

This post has been edited by selferino: Jun 21 2010, 05:38 AM

how to count how many percent OC eh?

i bought my stuff at pc-zone, still under 1 year, do i hav 2 wait long 4 the rma? can i get on the spot?

another question not answered, why i set in bios the cpu volt as 1.55v, but when in windows i stress using prime95, the volts shown in both HWmonitor n Everest are 1.6v?

update: my proc tested at my friends AM2+ mobo, still working(fuh)!, tetsed his AMD Athlon II X4 620 on my mobo, not working at all, so now my mobo is the only thing rosak i guess

haha see how the RMA goes 1st la
repost question: another question not answered, why i set in bios the cpu volt as 1.55v, but when in windows i stress using prime95, the volts shown in both HWmonitor n Everest are 1.6v?

as some people here may noe i have burnt my mobo 770-C45, already sent off to RMA, have to wait for 1 month, haih, but wait.....ah koo ooooooo ah koo guess wut mobo i just bought, GAYGAYBYTE 870A-UD3!!!!!! (bapak show off nyer noob yg bakar mobo sndri nie!)

will try to OC once update the the BIOS n bla3...wil do for sure, tis tyme i better stick to max 1.5volt ONLY for air cooling(gedik nk kejar 4Ghz sgt), btw i cant seem to find guides of Phenom II overcloking that relateas HT link Freq/Volt for better OCing, all they talk bout is just CPU volt/ FSb a.k.a HTT n CPU NB only, any guidance?

This post has been edited by selferino: Jun 24 2010, 09:01 AM