try looking at the back of the mobo..
proc quite hard to be killed.. unless u patahkan satu kaki like our dearest TS (atleast here la..but at Intel tered.. there are few..or several..since they rich ppl )

@ah_khoo..
no wonder..
escape from the comfort Vcore then.. i belip 3.0ghz doable in 1.4vcore... must be better with ur hands ofkos..

nah..i say it might not be killed..but who know


urs might not be like this.. a small black marking on the back where the place the kaki is soldered is consider burnmark too (am i right? sifuu?)
if got.. it will be useless to send to RMA..since they very strict at checking for markings

kalau xpercaya..tanya cloudwan..kekeke

no..i mean they very strict at checking..since ur mobo rejected last time due to pita pelekat on top of mosfets, no?

@selferino
1.55v still safe considering ure using tuniq extreme..but just check at the pins / the socket on the mobo..see any black spot(s).

so save some $$ from undervolting.. but i guess need to turn off the turbocore (What the term is?) to achieve satisfy result leh..
c45 have bios update for that?

@xaverkiang
1: adjust HTT.. (in amd..it is HTT..in CPUZ it bus speed).. HTT x multi = core speed
2: CPU ratio is multi (Refer atas)
3: CPU NB is not the Mobo NB..its the IMC..refer CPUZ tab memory..name is NB Frequency
4: memoryZ is like to know the default timing/ speed of ur ram.. just like CPUZ SPD tab
dah..penat..can google..

@monsh
AMD = budget..
budget mobo = less durable..
less durable = less prime hour..
so if me, i prime 1hr only..sometimes 32M superpi i consider stable for normal use

@monsh
got HT voltage meh? i tot got HT voltage only..
i guess i was wrong all this time lah..kekeke
last time..when im using K8.. an otai ask me to increase vNB when HTT oc..
and according to bro antonio recently.. adding a lil bit (1 or 2 notches) of vNB and vHT will improve overall stability..

and vNB is not volt for CPU NB yo..

---

Added on June 22, 2010, 10:42 pmmy CPUZ also state the same (Same mobo with u).. ID439D..but currently im in native IDE (since fogot to change when formating while ago)
iinm SB710 will be written as 750 in CPUZ

This post has been edited by kuntawakaw: Jun 22 2010, 10:42 PM

well.. im not in place to tell somethings wrong..since im a noob with this
but just to share exp.. installed win with AHCI enable.but while OC....sure need to reset CMOS plenty of time.. and fogot to revert back to AHCI after reset CMOS.. after some time running in native IDE, i changed back to AHCI...and win wont boot..
happend to me few times. (2 or 3 only perhaps)... might be related or not tho

that bios also have issue on unlocking.. i wonder too much flaw but not beta.. if beta i can accept la.

@8tvt..
1st time saw u posting some SS...
okie then...finalize the ram.. want to see the ram result more then proc btw, what mobo eh? nais vcore there.
cooler? since the temp so nais..

sorry too much question.. im watching silently every post..finding the good combo..kekeke

yeah..since thuban lotsa ppl reviewing it...but ram.. u gotta tweak it..kekeke
want to know how it perform in that evo

yeah.. quite weird... is that mean the chip is hotter? even with lower tdp?
i cant imagine AMD said 71c is after been OCed.. it just like "come2, this proc can withstand greater heat, hence can go further in OC" that is not it..
nahh..let it be... later wait for review..

btw off topic ..got sempron 140 unlock / athlonII x2 for sell here? powering up download/movie PC.. (cheap x3 also i want )

erk..i tot load line calibration is to make vcore as exactly as set..
or it only to avoid vdrop? increase on not apply?

edit:typo that can cause "what u toking about kunta??!!"

This post has been edited by kuntawakaw: Jun 28 2010, 10:59 PM