got a little time yesterday so put a few things on it, generally a very nice looking case but not as wonderful as i have hope for the hot swap door opening isnt that smooth for a 1300 case.

nice case... waiting for more update...

just testing fans and board block aint here yet ; ;

wowww a realllllllll chipset wb coming soon

looks humongous =O

is it possible to fit rad at the bottom of the case? like the tj07? nice and very spaceful case...

requires modding the bottom hdd cage can be remove but its a tad too short to fit my swiftech 220.

it can be done actually.. i've seen people put a 360 on top.. 240 down.. with lots of space for cable management >.<"

yea i think there is some rads that is not as tall will fit in perfectly as seen on xtremesystem but most just cut a hole and slide it in on the bottom.

and i thought ur mcr220 should fit?

nope its bout 1-1.5 mm too tall ; ; its ok though i only got 1 card nowdays so single radiator will do alrite.

This post has been edited by kevink82: Feb 1 2010, 10:05 PM

omg lol.. then how do those people in xtremesystem and OCN do it.. ><" i swore i saw people putting a 240 rad beside the psu area..

anyway bro.. so how good is the casing.. u think i should grab it?? or grab a mountain mod instead ?

well case seems good if u go single rad style also hard to fit a pump at the bottom part unless u use those s fittings.

mountain mod is huge though so shouldnt really be comparing to the 800d i think.

mountain mod is huge cubic case lol.. oh btw, u should see how vlad mount his rad .. maybe u could do the same way too

yea saw his post its a good idea but for me only a i5 it wont make too much of a difference, i was looking for a 1x120 maybe gt stealth to cool the mosfet and chipset though.

my fans have cleared customs along with a few other things so should be here this week.

like to keep as little tubings to avoid huge tube mess, btw got some blue murdermod left if anyone wanna take it off my hands

This post has been edited by kevink82: Feb 2 2010, 01:48 PM

ic.. so u still went with the typhoons =/?? got any fan controllers in hand??

too bad the sleeves aint black ..

still have black but no much bout 20 meters left only. nah ill skip fan controller this time i didnt really like the scythe i got sometimes it beeps and gives some errors which is pretty annoying.

LOL i hate the beep too.. very noisy.. but the error means that the fan's dead, didn't plug in the fan probably maybe ??

I believe there's a way to turn the beep off and the instruction is written somewhere in the box (if I'm not mistaken)

no idea but this time should just use the fan plugs on the board since theres a ton of it on this board..... lol.

kevin, old casing mana ler? charity back to me ler.. haha.. i no casing use le..

keke old casing still with me leh, my gentle typhoons has landed gonna put it on when i get home tonite.

gt..wahh ...how much u got it for bro...update the picts pleaseee

bout 47 ringgit each not including shipping. bought 5 since i got some paypal funds.

wah.. the price looks good .. i got my kazes at 40 each last time ..

the gentle typhoons and tygon tubing up.

wah setup looks so clean.. btw tubes look so small o_O.. or the case looks too big haha D:

oh and what gfx block is that o.O?

wah... nice layout and like the cable sleeve...

between, can know how u fill ur wc?

the bitspower z-res got 3 G1/4 on top i think.. so he got two left (either one can use as a fillport)

orr... z res... i thought is multioption 250 with bispower fittings...

its an ek 250 multiport, theres actually enough room to top to unscrew though it doesnt look like it in the pic.

is it means u remove the top and fill the coolant? can know how u make sure the coolant full the res? or u insert a tube between top fitting and the coolant level to sustance the coolant flow...

this is the sexiest one. all black and clean. love it. good job man

fill the res turn pump on, after it drain stop the pump and repeat. (without turning the system on that is)

That's a very nice rig there I'm sure you've took quite a bit of time getting everything sleeved?

5 hrs to sleeve everythin wasnt that hard but.......... i got burned a few times cause the heatshrink didnt cool down enough lol.

bro..thats cun bro...with more red in there its gonna look super cun !!!

sounds complicated imo.. u should get another multioption res v2 and replace the top with it..

Thread Moved from Worklogs considering this is just a plain review.

ever thinking of gettin a fillport.. it'll slight easier filling or draining for that matter...

nah dont like fillports just want it as simple as possible, i usually just cut the bottom tube and drain it out lol.

your fan looks fantastic and nice. anyway what's the highest rpm/cfm for this typhoon fan viewed from fan controller bro?

1450 just power it on for leak test today and i can say the fans r worth the money.

the the fan got a good looks IMO, anyway for 1450rpm is fine in aircond room, but my room is super HOT. That's why i need a speed range in between 2000rpm - 2500rpm

hehe up to u lor it holds pressure pretty well i can feel the wind even if i stand up.

---

Added on February 5, 2010, 8:54 pmhehe up to u lor it holds pressure pretty well i can feel the wind even if i stand up.

This post has been edited by kevink82: Feb 5 2010, 08:54 PM

how's the progress bro? hm... wonder how your thread has been moved to non-worklogs topic since i think it's still a worklog compared to a review.

idk o well lol....... maybe i didnt write a list first of wut going in ? waiting on the m3f block claw should have it send out tomorrow.

everything hook up and power on yet?

actually got the mobo block today so changing the loop a little to make it tidier and rock some bioshock 2.

great... upload a picture by then

if only lowyat let me upload lol



This post has been edited by kevink82: Feb 12 2010, 01:51 PM

wowww nice man... but why there's so many dust alike in the picture?

wooo cuun woorrr....that exhaust fan ..is it stock bro ?

wow, blood red in the dark, nice nice nice !

exhaust is stock yea, well i clean it everyday before but its still got so many dust so i cant be bother anymore lol acrylic is just dust magnet........

This post has been edited by kevink82: Feb 12 2010, 04:23 PM

fuyoo.,veli nice wor..

very nice setup in the end bro

btw the loop is res>pump>gpu>cpu>rad360>chipset>res right? ..

cukup ker 1 rad je for all of that ? i heard a 240 is the minimum size cool an i7 alone.. yet alone other components :S

This post has been edited by reiben05: Feb 13 2010, 12:13 AM

yea but im using i5 and its not pumpin out huge heat like the stupid i7

totally forgot

hehe but 32nm helps a lot with a good stepping for LGA 1336..
i saw a koolance block stressing an i9 (HT ON 4.5ghz w/ 1.36v vcore).. max load temps were 60C.. 12 Cores

my temp increased bout 4c going from 2 rad to the single triple which i can live with, idk bout the i9 but i do know they say the i9 line will only have 3 procs and 2 is released this year with 1 of them being the 999usd extreme edition.

not for the average joe imo, since we cant use 4 core most time 6 core seems overkill lol. hopefully they r still gonna pump out those 32nm i5s with 4 cores.

i do hope there will be an i7 with 32nm before switched to i9 later

happy chinese new year my friend.

happy cny to everyone keke but i didnt get any red pocket yet to fund my ssd and monitor.....

yup i do think theres a 32nm i7 in the making.. these 45nm are monstaaaaaa ..

anyway happy chinese new year to kevin

cheers ..

This post has been edited by reiben05: Feb 14 2010, 06:32 PM

The 980X is for sure 32nm Hopefully they move everything to 32nm's

bad news.. the i7 930 is actually 45nm fab.. batches differ, some overclocks quite good, yet some very epic.. temps wise.. almost the same as the current 920 C0

accoring to intel roadmap there is nothing new this year pretty much besides the 2 i9, the low tdp version of 1156 has completely disappear in the roadmap.

so its likely we wont be upgrading much this year they isnt even any plan to put usb 3 and sata 6g as native support this year...

so, i think it's not worth it to go to the i7 930 unless for the new buyer 'coz 920 will phased out once the 930 coming out later. it's still got the same ability like 920, only a slight higher on the stock clockspeed only.

it means the real upgrade should be held by next year... hahahahahha... let's see what's goin on later...

the x22 multiplier after turbo for the 930 will be useless...

as we know i7 likes odd multiplier.

so i7 930 expected to OC the same as i7 920.

Maybe Intel will have something like i7 930 E0 which overclocks to 5Ghz Well I'm not sure but hopefully there'll be something interesting coming, haha

yeah i also hope that i7 got E0 stepping too

awww too bad u sold ur X58 bro , a friend of mine got the chip and tested it.. 4ghz HT OFF.. 1.000Vcore.. very shocking and very3 impressive..
but like all the i7's.. it's a bit buggy when running an even multiplier, BSOD a lot..

hmm E0 stepping.. will it be better than C0??.. how come they didn't make F0's then haha.. (not really sure on the steppings thingy)

This post has been edited by reiben05: Feb 17 2010, 01:29 AM

yeahh EO is better than D0 > C0. But ES is better than all the stated..

how about M0"s on the Q6600 i know when the alphabetic order goes down.. u should be able to yield better overclocks and temperature should be less hotter (less heat generated)

This post has been edited by reiben05: Feb 17 2010, 01:35 AM

never play with 'em.. so no comment. anyway you can google to check the stepping order and the related in between cpu in general.

minor update mod a c-02 lian li cd bezel to fit 800d, wonder if i can get my thread back to worklog section since i moded something!!



This post has been edited by kevink82: Feb 19 2010, 03:29 PM

maybe you need to PM a moderator that's responsible for moving your thread to the original location

ROG = "Jahat"ness

no more update mr kevin?

nice setup bro