Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

 Astro B.yond Copy protection PROBELM

views
     
RAMChYLD
post Jan 21 2010, 04:16 PM

Regular
******
Senior Member
1,715 posts

Joined: May 2005
From: Klang
http://forum.lowyat.net/index.php?showtopi...&#entry31226861
QUOTE
Press the 3 buttons from left to right (power, up, down (or down, up, forgot the second button is up or down) ), then the decoder is boot itself and check for auto-update. If I not mistaken, current firmware is 23-Dec-2009.

Do that as soon as you turn on the box. My experience tells me to repeat three to four times from power up until the screen show that it's updating. I also notice that HDCP error can happen if using bad/broken HDMI cable. Try different cable and see if that helps if the problem still persists.

This post has been edited by RAMChYLD: Jan 21 2010, 04:21 PM
RAMChYLD
post Jan 21 2010, 04:45 PM

Regular
******
Senior Member
1,715 posts

Joined: May 2005
From: Klang
QUOTE(kuzza @ Jan 21 2010, 04:29 PM)
thx, can u explain more detaily? coz i tried but doesnt work, maybe i do wrongly?
*
Ok, what I did.

First, I switch off the mains and unplug the decoder and count to 10. Then I plug back and switch on the mains.
As soon as I switch on the mains, I start pressing the three buttons on the main panel from left to right repetitively (and quickly) until the TV screen show the updating message.

This post has been edited by RAMChYLD: Jan 21 2010, 04:46 PM
« Next Oldest · Home Entertainment · Next Newest »
 

Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0160sec    0.70    6 queries    GZIP Disabled
Time is now: 19th December 2025 - 03:30 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.