Does anyone have this probleM? PLease help me

what LCD brand bro use? kalau sony bravia mmg ada problem tapi lepas update firmware astro decoder...problem solve

Memang I use Sony Bravia. How to update firmware? Thx for reply btw

just off your byond from the mains and on back

I off main and on back already....still dont work. How to update?

http://forum.lowyat.net/index.php?showtopi...&#entry31226861

Do that as soon as you turn on the box. My experience tells me to repeat three to four times from power up until the screen show that it's updating. I also notice that HDCP error can happen if using bad/broken HDMI cable. Try different cable and see if that helps if the problem still persists.

This post has been edited by RAMChYLD: Jan 21 2010, 04:21 PM

thx, can u explain more detaily? coz i tried but doesnt work, maybe i do wrongly?

Put your decoder and standby a wait a little.. Mine update a few minute after I put on standby.

What is your software version right nor?

Mine is from octtober 27

---

Added on January 21, 2010, 4:38 pmby the way, can u actually see that is is updating? will it tell u>?

This post has been edited by kuzza: Jan 21 2010, 04:38 PM

its supposed 13 Dec 2009 latest update...

okay thx, later i put on standby

Ok, what I did.

First, I switch off the mains and unplug the decoder and count to 10. Then I plug back and switch on the mains.
As soon as I switch on the mains, I start pressing the three buttons on the main panel from left to right repetitively (and quickly) until the TV screen show the updating message.

This post has been edited by RAMChYLD: Jan 21 2010, 04:46 PM

Step-by-step

1.) Switch off your decoder
2.) Switch on back decoder
3.) Wait until boot message keluar kat lcd decoder....hehehe..rojak BM lak
4.) When boot message kuar push the button standby and then push the button ch+ and then push the button standby (push quickly).

after u follow this step...dia akan kuar messange kat decoder updated kalau tak silap...cube test..aku baru call installer tadi...hahahahaha


Latest Software Version Astro Beyond : 1.0.1001 23 Dec 2009



This post has been edited by SQL INJECTION: Jan 21 2010, 05:03 PM

thx, I already off it and On and it auto updated....Thx all of you!

Latest post

"Once every 5 minutes we send a signal to all the B.yond decoders which lets them know what the latest software version is. Your decoder can only act upon this signal if it receives it while in standby mode, so when you aren’t watching anything be sure to put your decoder in standby."

more info in the blog

http://stinkyfruit.wordpress.com/