Thanks for your support, Auditor

thanks for the support and compliments guys

Thanks for the compliment and support guys.

UGPM for those who made enquiries

Done

UGPM mate. Thanks again kobe10 for the feedback :0. Very much appreciated.

UGPM mate

am i missing out something on the FAQ here

UGPM guys

sent you a PM. Howie's car also threebond already

what car are you driving and how do you do it? Thats why it's important for ME to do it, sorry. There isn't white smoke because it's not a whole half can that's soaking in the intake manifold. The white smoke that comes out from the exhaust isn't carbon FYI. It's a result of the combustion of Threebond.


btw, you're the first

---

Added on May 25, 2011, 6:37 pmand please remember, I'm pretty sure that you car may be consuming engine oil. Go check and overhaul. If you dont want to, the car'll be fine after a few days when carbon accumulates at the worn piston rings again and it'll be lighter than before you did the threebond due to clean throttle body/carb and intake valve.


*speaking from experience

---

Added on May 25, 2011, 10:35 pmI guess it was used the wrong way. Case closed

This post has been edited by ThunderGod_Cid: May 25 2011, 10:35 PM

UGPM

Thanks Jimmy. However, whole bottle would be recommended for 100% penetration and better cleaning. From experience, a 2litre and above car feels lighter after 1bottle, and feels quiet after the second bottle

the primer is not gonna make your engine look 100% my friend. It works by melting all carbon and using it to seal up whatever holes and imperfections there is inside the engine, thus giving you restored compression.


As for the threebond, 2cans recommended for a v6 for better cleaning and penetration

UGPM

thanks for the compliments guys.

UGPM for those who enquired

thanks alot for your compliment mate

cheers mate

thanks everyone for the support.

UGPM guys

thank you all again for the good compliments

Thank you Ms. Canny