Got delivery mou ^^

This post has been edited by swk_sam: Mar 11 2010, 04:01 PM

Campro also come from behind but very poor at low rpm.

Low RPM winner:
1. Mitsu
2. CPS
3. Campro

High RPM winner
1. CPS
2. Campro
3. Mitsu

---

Added on March 11, 2010, 4:04 pmTo Puchong Now if can

This post has been edited by swk_sam: Mar 11 2010, 04:06 PM

oO... haha.. cos i working now.. after work no time cos need to go other place

He is from Kepong If u you get first than me please help me to get as well

This post has been edited by swk_sam: Mar 11 2010, 04:13 PM

If not mistaken, "R" = resistor. I forgot where I read an article that our mitsu engine are using resistor type spark plug. "R" = resistor type. Here is the picture, so u guys can find it easier.

NGK "R" or resistor spark plugs use a 5k ohm ceramic resistor in the spark plug to suppress ignition noise generated during sparking.

NGK strongly recommends using resistor spark plugs in any vehicle that uses on-board computer systems to monitor or control engine performance. This is because resistor spark plugs reduce electromagnetic interference with on-board electronics.

They are also recommended on any vehicle that has other on-board electronic systems such as engine-management computers, two-way radios, GPS systems, depth finders or whenever recommended by the manufacturer.

In fact, using a non-resistor plug in certain applications can actually cause the engine to suffer undesirable side effects such as an erratic idle, high-rpm misfire, engine run-on, power drop off at certain rpm levels and abnormal combustion.

---

Added on March 11, 2010, 4:42 pmHaha.. I found seller selling red colour de at RM90 but at Penang lolz..

This post has been edited by swk_sam: Mar 11 2010, 04:42 PM

Haha... Campro & CPS engine win at top speed while Mitsu win at pick up. Mitsu good for city driving while Campro & CPS good for frequent highways driving.

I still doubt, want white colour or red colour ... Xin help me decide !!!!

This post has been edited by swk_sam: Mar 11 2010, 05:05 PM

Kelvin help me decide too!!

Hmm... means got ppl diy edi?

hmm do u think can change the led colour in future? Some more xin if u successful help me DIY too Got close shot with clear picture for white colour de?

This post has been edited by swk_sam: Mar 11 2010, 05:29 PM

Ermm.. I think u grab 1 for me ba U got Kelvin no.? After that do u pass by Puchong? Around What time? If yes then we meet up & xin is finding bag for his new toy!!!!!

This post has been edited by swk_sam: Mar 11 2010, 05:37 PM

Here is Kelvin no. 010-365 4868. Sat & Sun i at Cheras lolz.. Its ok, arrange other day if can't, thanks

Mitsu winrar on pick up & FC
CPS winrar on top speed almost same fc as mitsu
Campro win mitsu on top speed same top speed as CPS

Ehh... Mitsu more silent than Campro wor.. is it the engine oil u using is not good?

I think something wrong with your engine oil... I am using semi-syn MAG1 US imported oil.. Engine as silent as new. better stay away from helix, castrol cos there were fake oil in the market. Some time workshop also dunno its fake or genuine..

---

Added on March 11, 2010, 8:27 pmWaja no suit fully syn.. i heard got 1 person post that his spark plug is wet after change to fully syn.. For Waja semi syn is more than enuff

This post has been edited by swk_sam: Mar 11 2010, 08:27 PM

mineral to semi no problem at all.

Try find at spare part shop

for headlamp

I using fog & head lamp HID till now, no police kacau passing block without problem

This post has been edited by swk_sam: Mar 12 2010, 09:35 AM

Actually not lucky matters. If using 4300k HID, its just look brighter & whiter compare to halogen bulb. Not glaring at all for projector headlamp, those non projector head lamp is super glaring I can say is a huge different.

This post has been edited by swk_sam: Mar 12 2010, 09:55 AM

Now all also can install HID. But need to do inspection at JPJ. Even HID install at factory also need to do so.