SuperPI,Everest,OCCT or prime95~

which 1 better??

currently using prime95~~dunno dunno take which type of stress~~

i think prime95, it test kaw2 and never once failed to blue screen me.. i hate it hehehe

prime...if want to test CPU only, then use small test...

I'd say OCCT. Its basically a Prime with extra bells.

I'm using OCCT

definitely prime.

linx anyone??

intel burn test

it stress harder than prime95 and occt, good thing is it consume less time to check for stability compare to prime95 hence more time saving.

stress using linx is 10°C hotter than using prime 95!

Prime for sure

wanna test the system stability~~so take small test??

i heard some other forumer said must put priority at 10~if not~u really not stressing your CPU~lolz

This post has been edited by oms600: Jan 9 2010, 02:04 PM

LinX too.
But I do test stability using both LinX & Prime95 to ensure it is really stable.

-pWs-

i use Everest.

Tried Orthos but it doesn't work well with 2 core 4 threads, at least on my case la.

first will do OCCT. if pass, then with prime.

pass OCCT mean already stable (can do anything without worry it'll crash or something). prime will ensure the stability even more.

some can pass OCCT but fail in prime. some can even fail after 21hour priming~

me lazy to priming long hour (8 hour is the longest i ever test). tak tahan nak tunggu yo~

Sometimes it makes me wonder if we really need 100% CPU usage for hours. I usually use prime95 x64 blend to stress it and stop it after to test 3. Never crash with passed test 3 settings for years.

this thread now in HQ&A! fffuuuu

should be in software section i think.

OCCT is good enough for me.

+1 for OCCT =P, if OCCT doesnt ring warning, ur system is stable =P

take which 1?

CPU:OCCT or CPU:Linpack

test mode and priority set to what value?

1 hour of OCCT is good enough to know that ur system is stable or not.

wont crash anything if pass OCCT one hour, (just make sure u change the temp monitor setting to 90C)

test mode and priority set to which 1??

just do 'auto 1 hour test'. temp monitoring set to 90C and u're good to go.

usually i just set the temp setting then pick auto 1 hour test. lazy to check other setting

definetly prime 95
2nd choice OCCT

baru nak type...

ok~OCCT pass at auto mode~1 hour

SuperPI is not CPU stressing program.. its for calculating the ram

run OCCT stress test with 490x9.0 without any error


but just now surfing web~my comp auto restart..

any solution

Heavy test ke bro ?

both software are goood,bt i prefer prime95.
frm ma experience ;
test wit occt -always stable
prime95 -usually one core failed,huhu

u mean with large data set??

because i just choose auto 1 hour test~

1. run memtest at least 30 minute
2. run prime95 with small fft.

memtest done~~no error

small fft~take how long? 1 hour?? and priority 1 or 10?

10 hour can ensure total stability. actually, 24hour for total stability.

3@4 hour is enough to know if ur system is stable or not. usually, b4 go to sleep i'll run prime. (when change some setting la)

need tick "round off checking" or not?

i didnt bother to tick it. just open and run small fft.