definitely prime.

first will do OCCT. if pass, then with prime.

pass OCCT mean already stable (can do anything without worry it'll crash or something). prime will ensure the stability even more.

some can pass OCCT but fail in prime. some can even fail after 21hour priming~

me lazy to priming long hour (8 hour is the longest i ever test). tak tahan nak tunggu yo~

this thread now in HQ&A! fffuuuu

should be in software section i think.

OCCT is good enough for me.

1 hour of OCCT is good enough to know that ur system is stable or not.

wont crash anything if pass OCCT one hour, (just make sure u change the temp monitor setting to 90C)

just do 'auto 1 hour test'. temp monitoring set to 90C and u're good to go.

usually i just set the temp setting then pick auto 1 hour test. lazy to check other setting

1. run memtest at least 30 minute
2. run prime95 with small fft.

10 hour can ensure total stability. actually, 24hour for total stability.

3@4 hour is enough to know if ur system is stable or not. usually, b4 go to sleep i'll run prime. (when change some setting la)

i didnt bother to tick it. just open and run small fft.