Jan 3 2011, 04:19 PM
QUOTE(k0m3n9 @ Jan 3 2011, 12:13 PM)
hi.. i got 2 decoders, 1 byond 1 older wan.. using 1-2 rf splitter + amplifier 2400mhz.. the setup is like this..
1LNB -> amplifier -> splitter -> 1. byond decoder -> 1st tv
-> 2. old decoder -> 2nd tv
the problem is whenever change to HD channel @ byond decoder.. 2nd tv shows no signal (all channels no signal) from the old decoder.. am i missing sumthing?
I believe the HD channel is using diff freq from the SD channel. So I guess when you switch to HD chan, there is a control signal sent to the LNB to change the freq and hence your old decoder no longer receives SD signal.1LNB -> amplifier -> splitter -> 1. byond decoder -> 1st tv
-> 2. old decoder -> 2nd tv
the problem is whenever change to HD channel @ byond decoder.. 2nd tv shows no signal (all channels no signal) from the old decoder.. am i missing sumthing?
This is why for Byond PVR you need to install two RF cables from the dish with 2 LNB so that you can have both HD and SD channels active simultaneously..
Quote
0.0210sec
0.29
7 queries
GZIP Disabled