Try this


HTT 200mhz
CPU-NB 2000mhz
HT-Link 2000mhz


CPU-NB 1.33v
NB 1.25v
HT 1.2v
SB 1.2v
VDIMM : Start 1.75v

Memory Divider 1600mhz
Timing 7-7-7-24-30 , the rest leave stock...




Now memtest

Let's isolate first,

Clear CMOS

Boot and enter BiOS

CPU leave it at auto on both multi

Set voltages on these items,
Cpu volt - stock
cpu-nb - 1.3v
ht - 1.2v

Reboot

Post into BIOS and set ram pulak

ram divider set to 1333mhz

Memory set at 1.75v (as true vdimm would either +-0.3~+-0.5v

timings on the main ones set to 7-7-7-24-33, set manually while the other memory option leave it first...

reboot and hope that it post....

If Post go into Bios

set ram divider to 1600mhz

Save and reboot

see if it POST...

If not, pinjam i5/i7 rig test 1600@CL7 1.7v see can boot or not..

This post has been edited by antonio: Jan 25 2010, 04:02 PM

Eh...silap2...

Set 1600mhz NOT 2000mhz....

2000mhz is taboo for us AMD

wut happen if put 1600mhz?? at wut settings n timing>???

i think CPU-NB cant really coup with the speed..bump 1.3v for the IMC and set at 2000mhz see if can boot....

set IMC first, reboot then only set to 1600mhz, then reboot..

tRFC can be at 90ns and 1T...no prob...

if you can boot probably IMC struggling...dun activate X4 B50 first, but on ACC set it to auto...

Slot dekat ker slot jauh??? 1n2 ker 3n4?

1.25 in considered 'stock' volts for the IMC handling DDR3, for DDR2 you can go as low as 1.1v but on DDR3, the GD70 put Auto at 1.190v when tested using DMM...so just bump urs to 1.35v see if it helps...

Me ram on 1600mhz can go lower than 1.28v for the IMC on 2000mhz...

Only one thing I can say...it is 32nm time !!!!

Mana best...Intel lagi powerrr...got Turbo!!! got Hyper!!! got triple channel memory, very fast in calculations....

AMD mana ada best...

hehehehe...jgn ko, kang masuk otai2 Intel mau lauk ko kena...

Actually both requires of understanding on which you need in order to perform....if u need a proc for video, jgn lar beli AMD, or if you need best bang for buck, jgn ler pi spend on i7, both ada kekuatan masing2 but statistically, Intel is the current king...

The X6 will in fact bring some fightback on i7 particularly the 920...with retail expecting slightly cheaper than i7, the X6 is the most sought after chip. But that after all the reviews come out, but for now, only assumptions and theory...

Its nice to see if the AMD X6 will be around 125-ish TDP...probably the 32nm fab process helps to cramp the tiny cores in such a small package...I hope the support for 3 (or even 4 Channel) DDR3 would be available and if it were to be, it is the icing on the cake...

Intel otai all garang weh...

You salah jerk kena cop 'noob'!!

tarak kasik chan langsung...

btw, aku rasa aku jual D9KPV kat AMD ppl ada ler 3-4 ekor...yg aku nampak br 2...yg lelain takan tak on lagik PC...

SuperPI ada effect kalau HDD slow ker?? HDD aku around 60mbps jerk...

Nothing serious, just and issue from Asus 785 series and a couple middle class mobos are affected...

Gaygay is gigabit...wakakkaka

Choke
An iron-core coil used in a power-supply filter system to pass direct current while offering high impedance to pulsating or alternating current.

http://www.tweaktown.com/news/14012/beware...okes/index.html

---

Added on January 26, 2010, 2:42 pmerm...nope...

only VDIMM...


This post has been edited by antonio: Jan 26 2010, 02:42 PM

Cant find ker cant found? can't found means you cannot find whats already found

I believe it is available...but where I can't just recall...

PCzone maybe

jgn kasi sy malu laaaa

taruk 7-7-7-20 then only memtest...

when at memtest main page, press "1" "3" then "8" key then press "Enter"

Let around 5 loops of passes

marah??? whats that? (sorry I'm spanish)

I probably will be selling one month sooner than expected my AMD rig...not all ler but CPU n Mobo will have to part, due to i7 personal needs

---

Added on January 28, 2010, 12:30 amBetter get now because of cheap let go price, better get after CNY due to new stocks and new model...

This post has been edited by antonio: Jan 28 2010, 12:30 AM

Bak kata Tun, "dah lama dah I have decided...."

Firstly go into bios find a phrase called "Cool & Quiet" ...dun put On or Auto, just set at "Off"

Secondly find a three letter combo called C1E, disable it also...

Now go inside windows 7 and go into Power Option... Power option is located in the Control Panel...

Look for High Performance or Always On settings...select it and press ok...

Look at CPU-z, does it change ur CPU speed?

---

Added on January 29, 2010, 12:59 amFirstly go into bios find a phrase called "Cool & Quiet" ...dun put On or Auto, just set at "Off"

Secondly find a three letter combo called C1E, disable it also...

Now go inside windows 7 and go into Power Option... Power option is located in the Control Panel...

Look for High Performance or Always On settings...select it and press ok...

Look at CPU-z, does it change ur CPU speed?





This post has been edited by antonio: Jan 29 2010, 12:59 AM

Give up already larr...just can go anymore, ram already exhausted out....

Drive + High Volts + Main Timing + Sub Timing also can't get it to beat 18:20.xxx

inikan pula 18:18

2000mhz CL9@1.67v

For me anything that is limited to a certain amount is best to be challenged than just a simple world record run...

not that I dun acknowledge world records and their holders, its just sometimes having the right tool and its luck dependent as compared to a set limit compy...


My gosh! verdict lajunyer???

Hihihih..thats why I always mentioned upping the cpu-nb voltage and memory voltage "above" average when trying to run a setup which "isn't" supported by manufacturers

Like for instance 1600 CL7 is basically 266 above spec and running it at CL7 or even CL6 stresses the IMC even further...

1.75v won't kill ur DDR3 and 1.3v wont kill your IMC