Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
127 Pages « < 49 50 51 52 53 > » Bottom

Outline · [ Standard ] · Linear+

 AMD® Socket AM2&AM3 Overclocking V21, ~.~ Thuban & SPI 32M Season.

views
     
kuntawakaw
post Jan 25 2010, 05:00 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....
QUOTE(antonio @ Jan 25 2010, 04:54 PM)
i think CPU-NB cant really coup with the speed..bump 1.3v for the IMC and set at 2000mhz see if can boot....

set IMC first, reboot then only set to 1600mhz, then reboot..

tRFC can be at 90ns and 1T...no prob...

if you can boot probably IMC struggling...dun activate X4 B50 first, but on ACC set it to auto... icon_rolleyes.gif

Slot dekat ker slot jauh??? 1n2 ker 3n4?
*
no B50..just 550BE...
owh..ya..havent try acc without unlocking..cuz last time biostar no EC firmware...
vIMC @ 1.25v..no go..
both slot set tried.. same..
nvm la sire... this is all the obstacle i have to get myself... i wont compete the superpi 32m (my score sucks... even with dual channel)
so at least i have things to play when getting bored doing thesis writing laugh.gif laugh.gif ..

trcf is auto at 90ns..okeh..later try with tighter trfc..



enough for today.this setting is fair enough for today... not much effort needed by my current setting..simple set and boot..steady and stable..
Attached Image
more than this..later... need to do some typing icon_rolleyes.gif icon_rolleyes.gif

This post has been edited by kuntawakaw: Jan 25 2010, 05:06 PM
xixo_12
post Jan 25 2010, 05:06 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
trfc tighter? why not start with loosen it first
kuntawakaw
post Jan 25 2010, 05:07 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....
QUOTE(xixo_12 @ Jan 25 2010, 05:06 PM)
trfc tighter? why not start with loosen it first
*
auto is 90ns
i loosen it then diorang marah saya cry.gif cry.gif cry.gif
antonio
post Jan 25 2010, 05:07 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(kuntawakaw @ Jan 25 2010, 05:00 PM)
no B50..just 550BE...
owh..ya..havent try acc without unlocking..cuz last time biostar no EC firmware...
vIMC @ 1.25v..no go..
both slot set tried.. same..
nvm la sire... this is all the obstacle i have to get myself... i wont compete the superpi 32m (my score sucks... even with dual channel)
so at least i have things to play when getting bored doing thesis writing  laugh.gif  laugh.gif ..

trcf is auto at 90ns..okeh..later try with tighter trfc..
*
1.25 in considered 'stock' volts for the IMC handling DDR3, for DDR2 you can go as low as 1.1v but on DDR3, the GD70 put Auto at 1.190v when tested using DMM...so just bump urs to 1.35v see if it helps...

Me ram on 1600mhz can go lower than 1.28v for the IMC on 2000mhz... rclxms.gif
xixo_12
post Jan 25 2010, 05:09 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(kuntawakaw @ Jan 25 2010, 05:07 PM)
auto is 90ns
i loosen it then diorang marah saya  cry.gif  cry.gif  cry.gif
*
laugh.gif i'm not so expert in ddr3.. better u follow their advice blush.gif
ah_khoo
post Jan 25 2010, 05:15 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(kuntawakaw @ Jan 25 2010, 05:07 PM)
auto is 90ns
i loosen it then diorang marah saya  cry.gif  cry.gif  cry.gif
*
90ns is d tighest if i'm not mistaken. i put auto usually. some board doesn't like forced trfc. but ofcoz there are ways & i'm no ram guru... nod.gif
kuntawakaw
post Jan 25 2010, 05:21 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....
QUOTE(ah_khoo @ Jan 25 2010, 05:15 PM)
90ns is d tighest if i'm not mistaken. i put auto usually. some board doesn't like forced trfc. but ofcoz there are ways & i'm no ram guru...  nod.gif
*
yes..its the tightest for my board

"trcf is auto at 90ns..okeh..later try with tighter trfc.."

means auto at 90ns but i loose to 110..later i tighten back... nod.gif nod.gif

boot-ed with 1600mhz cl7..vdimm not favorable... 1.84vdimm sweat.gif sweat.gif
and this is the lowest to boot... all antonio guidance been followed sweat.gif

i think im noob enough.. okeh..done...seriously im done for 2day

This post has been edited by kuntawakaw: Jan 25 2010, 05:22 PM
fuzore
post Jan 25 2010, 05:30 PM

<motion sickness around>
*******
Senior Member
2,142 posts

Joined: Jan 2008
From: who wants to know?
QUOTE(kuntawakaw @ Jan 25 2010, 05:21 PM)
yes..its the tightest for my board

"trcf is auto at 90ns..okeh..later try with tighter trfc.."

means auto at 90ns but i loose to 110..later i tighten back...  nod.gif  nod.gif

boot-ed with 1600mhz cl7..vdimm not favorable... 1.84vdimm  sweat.gif  sweat.gif 
and this is the lowest to boot... all antonio guidance been followed  sweat.gif

i think im noob enough.. okeh..done...seriously im done for 2day
*
there was an old saying " try n error will bring u good result"
this quote is from an old master... notworthy.gif
» Click to show Spoiler - click again to hide... «
kuntawakaw
post Jan 25 2010, 05:32 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....
how about urs bro? take out the ss pls...
xixo_12
post Jan 25 2010, 05:32 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
nice pawn thumbup.gif
ah_khoo
post Jan 25 2010, 05:34 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(fuzore @ Jan 25 2010, 05:30 PM)
there was an old saying " try n error will bring u good result"
this quote is from an old master... notworthy.gif
» Click to show Spoiler - click again to hide... «

*
old, yes, but master, hell no. masturbate got lah... laugh.gif

where is d motherboard tab of ya cpu-z ss bro... mad.gif vmad.gif shakehead.gif
fuzore
post Jan 25 2010, 06:36 PM

<motion sickness around>
*******
Senior Member
2,142 posts

Joined: Jan 2008
From: who wants to know?
QUOTE(ah_khoo @ Jan 25 2010, 05:34 PM)
old, yes, but master, hell no. masturbate got lah...  laugh.gif

where is d motherboard tab of ya cpu-z ss bro...  mad.gif  vmad.gif  shakehead.gif
*
he..he.. unker dont marah2 la nanti lagi tua ... laugh.gif

ss here.. icon_rolleyes.gif
» Click to show Spoiler - click again to hide... «
verdict
post Jan 25 2010, 07:56 PM

Time is Flying By
*******
Senior Member
2,458 posts

Joined: Apr 2008
From: M A N C A V E
Wow sudah kena jugak ker? LOL!

Mari meramaikan lagi ahli DDR3! Time to jump ship!
xixo_12
post Jan 25 2010, 08:17 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
ddr2 best whistling.gif
verdict
post Jan 25 2010, 08:27 PM

Time is Flying By
*******
Senior Member
2,458 posts

Joined: Apr 2008
From: M A N C A V E
QUOTE(xixo_12 @ Jan 25 2010, 09:17 PM)
ddr2 best whistling.gif
*

Ha Ha Ha! saya sangat memahami anda xixo bro! laugh.gif

TSAMDAthlon
post Jan 25 2010, 09:47 PM

The future is Fusion
*******
Senior Member
5,221 posts

Joined: Aug 2007
From: Deneb star
Aahahha whistling.gif

Everyone take a look at a new refresh here http://anandtech.com/cpuchipsets/showdoc.aspx?i=3726&p=1

And also this
"You also won't see anything about the new Thuban or Zosma cores, AMD's high end 6-core and 4-core products for 2010. We know model numbers but we don't know clock speeds, features or prices. Expect to see them in late Q2.

Processor Cores
AMD Phenom II X6 1075T ~.~
AMD Phenom II X6 1055T ~.~
AMD Phenom II X6 1035T ~.~
AMD Phenom II X4 960T 4 6MB L3 Cache,unknown L2 Cache 95W TDP ~.~

The bolded part..I wonder what the L2 Cache..The TDP quite low shocking.gif compared to current(125W) thumbup.gif

This post has been edited by AMDAthlon: Jan 25 2010, 09:48 PM
antonio
post Jan 25 2010, 11:21 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(AMDAthlon @ Jan 25 2010, 09:47 PM)

AMD Phenom II X4 960T 4 6MB L3 Cache,unknown L2 Cache 95W TDP ~.~

The bolded part..I wonder what the L2 Cache..The TDP quite low  shocking.gif compared to current(125W)  thumbup.gif
*
Only one thing I can say...it is 32nm time !!!! thumbup.gif
-tze-
post Jan 25 2010, 11:29 PM

Getting Started
**
Junior Member
188 posts

Joined: Aug 2009
From: Bristol City, UK
amd so syiok got 6 cores... and i'm sure it wont cost as much as i7 860/920.. guess its time for me to change to amd..
antonio
post Jan 25 2010, 11:53 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(-tze- @ Jan 25 2010, 11:29 PM)
amd so syiok got 6 cores... and i'm sure it wont cost as much as i7 860/920.. guess its time for me to change to amd..
*
Mana best...Intel lagi powerrr...got Turbo!!! got Hyper!!! got triple channel memory, very fast in calculations.... rclxms.gif

AMD mana ada best... doh.gif



dafreak
post Jan 26 2010, 12:02 AM

Regular
******
Senior Member
1,064 posts

Joined: Jul 2008
From: Star Stuff
sign0006.gif

anyway, i wonder when 555 BE will hit our shores hmm.gif
« Next Oldest · Overclockers United · Next Newest »
 

127 Pages « < 49 50 51 52 53 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0308sec    0.45    6 queries    GZIP Disabled
Time is now: 2nd December 2025 - 05:19 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.