What player and what amp are you using ?

You set your BD60 to PCM for both True-HD and DTS-MA? What about your settings in Denon? Auto mode?

Don't own the Denon, but normally if you set the AVR to Auto and your BD60 to Bitstream or PCM you will still get full multichannel sound.

If you are getting stereo sound, maybe you are playing around with a mode that is only meant for stereo.

Since it has the HD decoders built in it should also be able to do Multichannel LPCM.

Everyone knows it's different thing, BUT "Since it has HD decoders built in it should also be able to do Multichannel LPCM"

Hope you see the diff between "should be able to" and "must be able to"

This post has been edited by Ngto: Dec 2 2009, 10:43 AM

Do you know that what a HD decoder does is decode bitstreamed HD audio into LPCM? Whether it's the Player that does the decoding or the AVR that does the decoding in the end it all decodes into LPCM.

If an AVR is advanced enough to have HD decoders built in, it is reasonable to also expect it to have the ability to accept LPCM as well , no?

This is in reply to Lone*Wolf who was wondering whether his Denon 1909 could accept LPCM.

Seems you are trying to make an issue out of nothing

Because he buy HD Decoder AVR surely try to bring in HD Audio as well lah. No harm to try solve is problem thoroughly.

Unlike you only want to critise and comment just to prove a point but before this never try to help him with his problem

Haha no lah he hantam me. In the end we all friends here no ?

Yes , see how his feedback. Anyway still not totally clear what his settings are that result in 2.0 stereo.

If you bitstream from your BD60 to your 1909, then it's the 1909 doing the decoding. How come it's stereo . What disc are you playing , btw?

Are your speaker setup in the AVR all correct? Or could you have set up your AVR to play through zone B or something? (Don't have Denon, so just wildly guessing ). Better wait for Denon users.

---

Added on December 2, 2009, 8:46 pmGood one there Yonggoh

This post has been edited by Ngto: Dec 2 2009, 08:54 PM

But Lone*wolf already said he set his BD60 to Bitstream and Secondary Audio to 'Off'.

Lone*Wolf, just curious, are you selecting PCM from the Audio options on the disc itself?