Dec 1 2009, 12:55 AM
QUOTE(prasys @ Nov 30 2009, 11:19 PM)
Check SNR Margin
If you've a good SNR Margin , say 30-40 , then 4Mbps would be superb. if its like 15-20 , then you'll have issues with 4Mbps....
how about mine?If you've a good SNR Margin , say 30-40 , then 4Mbps would be superb. if its like 15-20 , then you'll have issues with 4Mbps....
--- System Information ---
Vendor: Linksys
ModelName: WAG54G2
Firmware Version: 1.00.17 , 2009-06-02T19:15:44
Boot Version: 1.03
Hardware Version: 0.01
--- DSL Information ---
DSL Driver Version: E.25.41.39
DSL VPI/VCI: 0/35
DSL Status: Showtime
DSL Mode: T1.413
DSL Channel: 64
DSL Upstream Rate: 512000
DSL Downstream Rate: 1024000
Down up
DSL Noise Margin: 24 dB 33.5 dB
DSL Attenuation: 2.5 dB 2.5 dB
DSL Transmit Power: 6.3 dBm 12.3 dBm
--- Wireless Information ---
Wireless Driver Version: 2.1.38
Wireless Status: Enabled
Wireless Standard Channel: 11- 2.462GHZ
Wireless SSID: Sam's Wireless
--- Dynamic Information ---
LAN Mac Address: 00:22:6B:E6:80:4F
WAN Mac Address: 00:22:6B:E6:80:51
Wireless Mac Address: 00:22:6B:E6:80:50
---
Quote
0.0386sec
0.60
7 queries
GZIP Disabled