takpa, mati lagi angkat am3 punya mobo pulak.


didnt realize it was 780, i tot 785.

i need to refrain myself from doing high OC.

yesterday in a rush summore, bio,asus,giga-certain model dun have stock.

that mobo already running.

nie kira mcm wakenabeb la nie?

3.7ghz consider suicide on this mobo?

btw, where to send MSI mobo to RMA?

will remember that~

i just got myself, self-pawnage award today~

u guys make me wanna cry liao~

waste my moneh for old-school mobo, tonight i test OC it, see whether it can reach 3.8ghz. this is not first time i waste moneh for nothing. (buy CCF when i get UD3R b4, kenot use so kena beli cooler lain)

ni kes tak belajar dari kesilapan la nie~

btw, only can put really2 small fan to cool the NB, CCF too big liao. should i get those 'kipas petak', open the side panel and blow the whole mobo?

this is the 'kipas petak'

takpa. later i poison my younger bro to buy new mobo, later i change with him.

bout that kipas petak, i iz serious bro. seriously want to ganti my side panel with those kipas petak. intake fan tahap dewa.

i open my raven side panel to cool down my rig, dusk penuh kaw2. now tutup balik side panel after clean the dust. tapi idle temp 65C tu~

---

Added on November 26, 2009, 4:25 pmb4, seriously thinking to get aircond but when every month bil elektrik is rm250-rm330 (nie belom pasang aircond lagi nie). cancel terus!

This post has been edited by uzer85: Nov 26 2009, 04:25 PM

someone is spreading deadly poison~

My noob attempt with krabby-patty mobo~

Phenom II X4 940BE

- Revision RB-C2
- CPU Clock - 3600MHz (240MHz * 15)
- CPU voltage - 1.45v
- CPU-NB voltage - 1.2v
- Northbridge clock - 1920.09MHz
- HTT link speed - 1920.1MHz w/ 1.2v
- Motherboard used - Gigabyte MA78GPM-UD2H
- Type of cooling - CCF

definitely need 1.45v for 3.6ghz, below that the legendary blue screen will appear when stressing~

will try up the HTT, but with this mobo. saya agak takot~

my dream too~

but seem impossible with this SUPER GREAT mobo.

ya. takot KABOOM! hahaha

ok, will try with higher multi first, see how it goes.

yup. 1.45v is definite volt. kalo lower, boleh boot tp screen biru akan kluar bile stressing.

1 to 1?? betol gak, sementara 1st weeks nie 1 to 1. baik aku hentam tgk~

u use M-Flash? got so many issue mobo died when using M-Flash.

better use those dos-disk via thumbdrive and put command to flash.

RMA is the way to go......

---

Added on November 28, 2009, 12:51 pmrun on what mobo?? nais HTT there.

This post has been edited by uzer85: Nov 28 2009, 12:51 PM

my mobo become weird liao~

been trying lots of setting and cpu volt (i mean a lot lot), now it cant boot on my normal 3.6ghz setting. pc wont boot.

need to take out the battery to clear cmos then baru can boot. ( giga dual bios oso kenot boot)

try 1.55v then the prob occur. probably my old chipset mobo terperanjat kot~

sigh......

sudah flash ke latest bios dah tu~

now takot liao, maybe mobo limitation kot.

maybe that core become faulty.

well, that's possibility only. mine suffer degradation really soon liao~

after 3-4 month oredi degrade. need higher vcore than b4 for the same speed.

with default setting oso happen??

this is not good liao~

even without thermal paste, core temp wont reach 100C yo~

probably heatsink didnt fit properly. how the result now?