so far , things that i have finished ...

-cut the side panel for acylric.. measurement roughly around 2mmx420mmx580mm [done]
-fix all my WC gear inside the case (pump,nb-max and res) [done]
-ordered PSU sleeving gear and cable management stuffs [working on it]
-re-apply the proper way of TIM (OCZ Freeze) on my gtz, it spreads pretty evenly (checked ) and no dark spots alright.. [done]
-ordered a 120mm saw hole [done]
-ordered 5x 120mm fan grills [done]


things i still havent done:
-cut the other side of the panel (just for fun )
-re-lap my processor (if i have time)
-havent ordered any plexi glass/acylric yet [DONE]
-need a longer screw (M3) if i want to mount a fan on my side panel [ordered]
-get a diamond disc cutter [no $$ for it to expensive]
-get some crazy delta fans for fun lol.. [DONE, GOT 3x ULTRA KAZE]

well i still need some opinions on this:
-cutting a few holes on my mobo tray for E-ATX mobo psu cable + SATA cables [DONE]
-cutting the aluminium mesh on top of the case.. replace it with acylric and 120mm blowholes for fans (optional) [DONE]
-change from UV white tubings to normal transparent tubings as i dont have any uv cathodes.. only light blue ones or just get UV cathodes [DONE]

-pics will be uploaded soon
-did all of these with a drill and a dremel

here, my current side panel


my.. the paint pilled off =/ and this was from pulling a masking tape lol also there are a few minor scratches inside


whole setup =X



should i cut this? the alu mesh +X


is the tim i put too much?



-really cant say anything about the wires ._. [sleeving + cutting the wires on the process]

This post has been edited by reiben05: Nov 22 2009, 08:51 PM

uploading.. imageshack is being an ass xD..

edited * done




my very first blowhole on alu.. its a Silverstone SUGO series.. for my friend.. did it with alu.. i screwed up the fan holes .__., did it with a dremel and without a fan grill haha..

This post has been edited by reiben05: Sep 11 2009, 01:05 AM

lol thats why i just put 1 thin line since the i7 die core is slightly longer than the normal core 2 duo's, spreading with hand/card seems to be impossible coz it end up sticking to the card/finger..let the weight of the heatsink spread on it, bolt thru kit seems the best for this job...


btw i just cut a square hole for my mobo tray.. now i can slot in the mobo-ATX psu and graphics card psu neater ..

next job to do, cut the aluminium mesh on top of the panel and replace it with acrylic (will be using scotch's double sided tape for sticking it... and also re-paint the case , its pilling off (fuk this is a very tiring job and $$ money)

This post has been edited by reiben05: Sep 14 2009, 09:33 PM

duh.. it was without a proper fan grill .. cutting it mostly base on assumption..

btw i have a adjustable saw hole now.. can't wait to use it, waiting for clamps

---

Added on September 16, 2009, 12:58 amo yeah forgot to add.. lapped my cpu .. pics coming soon, maybe tmrw i upload..

---

Added on September 16, 2009, 1:14 ami am gonna do a re-lap again.. its not flat >.<

---

Added on September 18, 2009, 6:03 pmk i have cut the mesh's on top .. now waiting for my acrylic i ordered ^^

This post has been edited by reiben05: Sep 18 2009, 06:03 PM

lol.. project almost done .. waiting for my sleeving tool + two more bling2 cathodes, acrylic panels and radiator grill (acrylic).. RAWR!

yeah.. gonna post some pics soon .. finished my side panel and radiator mounts (friend made it for me) althou im still waiting for my ultra kaze.. even had my EK dual bay res + 2x 90* and 2x 45* rotaratory fittings today.. w000t.. im gonna mount my own HDD system too.. it'll be simple coz i am in need of space haha

---

Added on October 20, 2009, 12:36 am







This post has been edited by reiben05: Oct 20 2009, 12:38 AM

hehe it was done by my friend =D..

hmm i think i mounted it correctly, mobo is an ASUS Rampage II Extreme ..hmm?



This post has been edited by reiben05: Oct 20 2009, 01:48 PM

probably around RM800 too.. with 2 compression fittings (mine is silver instead )

it gives u a bit of more choice on how to mount the pump @_@ and looks good at the same time too .. btw just got my ultra kaze's today.. 3000 rpm.. 133CFM, 48 dBa D:

yes its the same as that alright

o.o got ppl fighting my thread D:.. omg

yup bro.. its a MCP655 pump + D5 vario+ Bitspower modkit.. its gonna cost a lot probably around RM800++, yeah its imported alright.. bought it from acther a few months back


This post has been edited by reiben05: Oct 31 2009, 06:57 PM

k pics updated ..

















only left with mobo tray now.. ^^.. looks like i wont be having an internal DVD drive lolz..

waiting for my PSU and GC haha.. aiming for the Vapor-X HD5870/HD 5970(hd5870x2), i doubt i can fit another rad for the GC inside this case lolx..
asked a fellow forumer to sleeve it for me as i got no time and proper equipment.. should arive by end of the week

using metallic black spray XP

lol im using the OCZ Elite X Extreme 1000W.. modular =/.. the wires are pretty messed up and the sleeving that comes with it are awfull.. i wish i have the Tagan PipeRock 1300W..

hehe thnx bro , i have assembled everything btw, mobo, tubes and everything.. just no GC and PSU

otw, using posparcel to ship it from sarawak to my place, should be here by tommorow , i'll post some pics later on to see how my psu is after sleeving xD

he sleeved it for me edi, chapalang ones i think xD

i striped all my parts back off.. gonna re-do it AGAIN.. since the cuts i've made are not straight =(..

WC parts im using now

EK MultiRes 250
Apogee GTZ SE 1366
Feser 360 + 3x Scythe Ultra Kaze
MCP655 D5 vario + bitspower modkit

MIGHT BE ADDING

Bitspower NB/SB Block for R2E
Bitspower HD5870 GFX Silver Block [MIGHT BE GOING CROSSFIRE]

if i add the GFX , i guess i'll be needing another rad [240]

as for the colour =P.. my uncle said that he might be able to get powder/ceramic coating service for me

u mean the NB-max?? one of the screws fell into the sink drain when i was cleaning it inside the toilet rofl, the rubber thingy also problematic, couldn't get it to fit inside lol, and one of the screws (the head) is screwed, its stuck now >.< ..

ahaha nak powder coat ape tu?? raidmax D:?

a bit la.. menyesal now

oh btw.. the square slots on my mobo tray.. i just filled it to make it circular shape.. now it looks like a double headed dildo lolz.. will upload later..