Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
6 Pages « < 3 4 5 6 >Bottom

Outline · [ Standard ] · Linear+

 Projec on my TJ09.., i think it is worklog =X

views
     
TSreiben05
post Jan 2 2010, 04:58 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


dah open dah..

i think its burnt lol..

user posted image
user posted image
user posted image
user posted image
user posted image

some burn signs?? (yellow ones)

TSreiben05
post Jan 2 2010, 05:20 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(kInOzAwA @ Jan 2 2010, 05:01 PM)
do u smell it? sometimes it looks like burn but it's not.. laugh.gif smell it first then u will get a clue biggrin.gif
*
doesnt smell like anything zzz.. or my smelling skill sucks.. laugh.gif
TSreiben05
post Jan 2 2010, 05:32 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


nothing at all... just nothing
TSreiben05
post Jan 2 2010, 07:25 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(kInOzAwA @ Jan 2 2010, 06:06 PM)
send RMA back ler reiben biggrin.gif
*
jauh tu nak hantar lol..
TSreiben05
post Jan 2 2010, 08:15 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(Susaiput @ Jan 2 2010, 08:05 PM)
kesian die... tongue.gif
*
stupid pump.. to be honest.. i think when i open the pump part.. there was like so much water in it.. so it must have died sad.gif.. can't be it was dry..
TSreiben05
post Jan 2 2010, 10:06 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(Susaiput @ Jan 2 2010, 08:19 PM)
mayb when u dropped it the seal/o-ring that supposed to separate the electrical parts n the water parts came off...who knows...tough luck dude...

ermmm...malam nih free ke?ak tgh bosan ni...no one at home lol....
*
no idea what u talking about sleep.gif"..
malam ni busy ar bro.. malam esok ar aku pass dremel smua.. cutting disc tinggal 1 haha.. habislah lol..

QUOTE(kInOzAwA @ Jan 2 2010, 08:22 PM)
lol.. post je laa... biggrin.gif
wahhhh pity you, bad luck already....  doh.gif
brings the girl in... hahahhahahahahahhahahahhahahahah  drool.gif  sweat.gif
*
lol baru je lepak malam smlm sampai kul 1 pagi XD
TSreiben05
post Jan 2 2010, 11:13 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(Susaiput @ Jan 2 2010, 10:31 PM)
ahahahah...baru kol 1...meh lepak ngan ak sampai kol 5.30pg...XD
*
lol kul 5,30 dah tido da kot sleep.gif..
TSreiben05
post Jan 2 2010, 11:15 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(Susaiput @ Jan 2 2010, 11:14 PM)
ahahahaha...tak bujang la tido awal...XD
*
boring .. so tido je la.. mimpi dapat quadfire HD5970 happy.gif
TSreiben05
post Jan 2 2010, 11:27 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(Susaiput @ Jan 2 2010, 11:16 PM)
LOL...mimpi basah la tuh...XD
*
perghhh =.=", ada TJ07 for RM580.. xtaw nak beli ker tak..
TSreiben05
post Jan 3 2010, 12:12 AM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(kInOzAwA @ Jan 2 2010, 11:54 PM)
lambat........ errr bukan dah ada org reserve ke? huhuuhuh... buy ler kalau ada stok lagi.. rugi kalau x beli. Next time susah nak dpt offer rendah mcm tu. biggrin.gif
*
nvm la.. the difference in size i research between the TJ09 and TJ07... 4cm longer, 6cm higher.. 1cm wider sleep.gif:.. with that price.. i'd think i'll get a lian li instead.. 10cm
taller, 10 cm deeper..

tapi RM580.. doh.gif.. haih..

This post has been edited by reiben05: Jan 3 2010, 12:12 AM
TSreiben05
post Jan 3 2010, 01:22 AM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(kInOzAwA @ Jan 3 2010, 12:22 AM)
lol... it's not about size, but either it's easily can put the wc stuff inside or not.. hahahahahhaha biggrin.gif
*
the bigger the better biggrin.gif.. btw i can't find any Tagan cases and rocketfish case drool.gif, i'd take these two over a TJ07 haha

QUOTE(Susaiput @ Jan 3 2010, 12:22 AM)
murah tuh bro...lianli dah 1k....
*
i know.. dapat kat claw.. damn haha
TSreiben05
post Jan 3 2010, 04:59 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(kInOzAwA @ Jan 3 2010, 01:29 AM)
lol.... anyway i love the looks of mountain mods case recently... very cool casing for wc... hahahahhahaa

http://www.mountainmods.com/
*
http://www.mountainmods.com/ascension-dual...-top-p-463.html

this case rocks.. but for 500$,
better than a Lian Li imo haha.. i would certainly get this over any case in the world biggrin.gif
altho most people hate it for its cube shape xD

QUOTE(owikh84 @ Jan 3 2010, 08:46 AM)
karom?
*
nope some guy in garage sales.. claw got it omg, can u believe it xD..
TSreiben05
post Jan 3 2010, 07:10 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(kInOzAwA @ Jan 3 2010, 05:33 PM)
hahaha yeahhhh the mounting mods case rocks and can put a lot of goods!!! The behemoth stands 24 inches tall and is 18 inches deep and wide. The standard configuration allows for one motherboard tray in a vertical position on the left side of the case. On the lower front 6 x 120mm intake fans are positioned for two world renowned Thermochill PA 120.3 radiators. On the back wall another PA 120.3 radiator can be mounted on the right side chamber, while a lone 120mm exhaust above the MB tray has enough space to mount any single 120mm radiator including the Thermochill PA 160. Also on the back wall are 2 Power Supply ports - one on the lower right and one way up in the right corner above the MB tray and 120mm exhaust port. The front and back panels can rotate 180 degrees for a different configuration. Or easily change your configuration by purchasing individual panels.

user posted image
laugh.gif i just asked clawhammer, he told that it's not him to grab the Silverstone TJ-07 that dro are selling...  smile.gif
*
omg claw canceling last minit sleep.gif".. i just used my money to buy some other stuffs.. aduh..

btw where can get these cases? bulk how much estimate XD?
TSreiben05
post Jan 3 2010, 11:06 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(kInOzAwA @ Jan 3 2010, 08:52 PM)
which case are you refer? TJ-07 or mountain mods?  TJ-07 new price is still expensive RM11XX - 12XX, but for the mountain mods it's is more expensive than TJ07.. around RM15XX - 16XX or maybe more if including the custom tax + postage.. laugh.gif
*
and it can fit like 3x 360 rad easily.. even the TJ07 would require a lot of modding on the bottom and on top biggrin.gif

QUOTE(tesla_rage @ Jan 3 2010, 10:50 PM)
TJ07 la bro smile.gif Its expensive, but like I always say "Get it over with!!!". Else, sampai bila2 asik terpk pasal TJ07 tongue.gif
*
hmm whats the price of new TJ07 xD?
TSreiben05
post Jan 4 2010, 08:31 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(kInOzAwA @ Jan 4 2010, 01:49 AM)
lol.. if you buy from moderno pc can get RM1199 new price for TJ07 ler reiben...
*
look at my case now XD

user posted image
user posted image
user posted image
user posted image
user posted image
user posted image

cable management isn't the best, but it aint bad either

why would i need a TJ07 after this haha.. another 360 rad?? lol

btw i got my pump from vlad today.. haha he was shocked to see me.. "so young" lol xD

This post has been edited by reiben05: Jan 4 2010, 08:32 PM
TSreiben05
post Jan 4 2010, 09:55 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(kInOzAwA @ Jan 4 2010, 08:36 PM)
laugh.gif.. but the pump ain't function... biggrin.gif you still need to buy another mcp355 waterpump x 2 for best high flow setup. no need another 360 rad smile.gif
*
oh this is the new one from vlad.. functioning very good imo biggrin.gif.. there's a flow meter on my res and its spinning pretty fast

QUOTE(kevink82 @ Jan 4 2010, 09:27 PM)
too long way for the water to travel if u add too many radiators, the heat will not be cleared from the radiators that way its just fine the way it is.

the shorter the loop the better.
*
lol i've seen crazy loops before.. uncountable rads xD.. but a few pumps i guess (3 655 i think)
TSreiben05
post Jan 4 2010, 10:37 PM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(kInOzAwA @ Jan 4 2010, 10:05 PM)
3x 655 will eat more space... the only case looks good with these is a mounting mods casing, even tj07 doesn't looks good with so many 655 pump on it.. hahahahah... 355 is smaller and easily to mount around, so this is the only option for your current casing biggrin.gif
*
lol i wont stuff 3x MCP655 inside my current case..

maybe after i get a LL P80 or a mountain mod case XP ..
TSreiben05
post Jan 5 2010, 12:51 AM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(Susaiput @ Jan 4 2010, 11:25 PM)
perghhhh....now thats sexy...
*
hehe biggrin.gif.. taknak grab TJ07 tu ker?? its gonna be much more beautiful later haha

QUOTE(clawhammer @ Jan 5 2010, 12:25 AM)
Reiben's got a beautiful rig running now biggrin.gif Maybe time to show of some good temps?
*
haha thnx bro.. after cleaning the block also temps are the same.. 68C max on a 23C ambient room.. idling at 38-40C atm biggrin.gif

user posted image

user posted image

user posted image



This post has been edited by reiben05: Jan 5 2010, 01:12 AM
TSreiben05
post Jan 5 2010, 12:58 AM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(lichyetan @ Jan 5 2010, 12:51 AM)
ur loop will work better if u separate the cpu cooling and gpu cooling and add in another pump.

it will yield better performance. dual loop always better than single loop.

the temp difference when adding extra radiator will be minimal when ur current radiator able to handle ur hardware heat load. Additional radiator wont help much when u already reach the point where the delta temp of ur water is low.

remember, water cooling wont get ur temp lower when the water inside the loop already reaching near or equal to ambient. You will see ur core temp etc still not touching ambient as u must take heat resistance etc from the cpu ihs to thermal paste to water block.

my advice is if u wan go extreme and multiple radiators setup, try built multiple loops each cooling their own components rather than cool everything in a single loop.

anyway nice setup you got there. add in another pump and built another loop bro, maybe 360 cool only cpu and 240 cool the gpu.
*
thnx for the advice biggrin.gif.. i'll add in another pump if i got space haha.. fitting all of this is like.. ngam2 edi lol
TSreiben05
post Jan 5 2010, 01:00 AM

American Muscle
******
Senior Member
1,800 posts

Joined: Dec 2008
From: unknown


QUOTE(kInOzAwA @ Jan 5 2010, 12:59 AM)
your screenshot is too small ler bro. i can't see it clearly... biggrin.gif
*
i'll upload it bigger soon biggrin.gif..

6 Pages « < 3 4 5 6 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0334sec    0.90    7 queries    GZIP Disabled
Time is now: 5th December 2025 - 04:29 PM