tada.. all finish .. finally got everything to fit inside

uploading my results.. test setup : ambient 20C at night xD.. fans used are Scythe S-Flexs with fan controller (1.8k RPM)

---

Added on August 31, 2009, 8:35 pmcables a bomb thou ^^.. i'll re-arrange it later once i change my tubes to a transparent one

This post has been edited by reiben05: Sep 1 2009, 01:47 PM

expensive =/.. RM50 for 500ml zzz.. rather spend on acrylic

---

Added on September 1, 2009, 11:07 pmlooks better like this hehe.. 800x600 too small

This post has been edited by reiben05: Sep 1 2009, 11:07 PM

expensive.. RM2k? minimum

probably just the angle i was taking.. i have reseat the swiftech a lot of times.. and no leaks at all =/.. same with the NB, and the O-Ring im using, is the thicker one which is the one that comes with the swiftech barbs.. so it'll be slightly terkeluar

hehe thnx ^^.. going to upgrade more later if got time+$$


whats wording xD? u mean the logo?

i resize it later haha.. i guess this forum doesnt give automatic scale down when pics are too big.. uploading it will take some time =/..

i will be updating my case soon.. just painted a few of my parts inside there with air spray paint... too bad the primer one finished out of stock.. so i only use Metallic Black.. so far.. only 1/3 of the mobo tray + HDD cage is completed.. , sanded them with 2000 grit sand paper first

just did a mirror finish on my TRUE Black =D.. its not flat 100% yet lol.. after being lapped with 80grit and 2000 grit .. 80 grit and still cannot make the copper base to appear in the centre .. after that polished..



also my GTZ .. after a re-lap with 2000grit and polished.. before this it was pretty damn dirty due to frequent change and reseat of TIM..

This post has been edited by reiben05: Sep 4 2009, 09:40 PM

i only lapped it with 2000 grit.. just to remove the stains and give it the original mirror finish


i just used 80 grit on the TRUE xD.. i didnt think 2000 grit could be used to lap it, only mirror finish .. the GTZ, i only used 2000 grit since it was pretty rough and dirty..

This post has been edited by reiben05: Sep 8 2009, 01:00 PM

yeah.. but i;ve reseated it like 20 times or so =X.. it got very dirty.. not even water/polish could remove the stains.. its like the darker stains u see on a mirror finish copper plate..