depends on where you go lar.

Surefire E2DL just updated, with 200 lm now!!!!

So Old Newspaper, you have another choice, I might want to encourage you to get this ?? cheaper than LX2, and don't have the clip-rubbing-tail issue. Oh, it tail stand too!

Since the price in Malaysia is expensive, so may be you can be local dealer ???

This post has been edited by susuman: Oct 24 2009, 11:08 AM


Attached thumbnail(s)

ha ha, don't mean that kind of dealer, but if someone help sending from US already good. Like order the surefire, then send via registered mail ?

Hmm, may be Polkiuj ?? since he has parcel shipping in from US regularly??

---

Added on October 24, 2009, 1:21 pm"I just got this from OpticsHQ

"Just spoke with SureFire. They did NOT change the LED, only packaging since all the later E2DLs have been running at that output."

Frank"

quote from #27 from here New Surefire E2DL
haha, no wonder my E2DL is brighter than the fenix PD30 245lm.

This post has been edited by susuman: Oct 24 2009, 01:21 PM

see u guys there, will bring some 18650, oldnewspp...

Ah Ha, nice meeting you guys too!

Have a nice weekend.

I think Fenix over drive in the Turbo mode, as I told you before, it happened to me on the Fenix P3D, 30 min in Turbo, the plastic dome lens (what it called ah?) cover the LED will be over heated and become brownish. Though the die may be a bot yellow also, but the dome lens will kill alot of lumens. Take a photo may, for us to see?

So for Fenix owners, check your manual, it says don't run on Turbo for more than 10/15 mins. (Silly clause ) only found out after I burnt the P3D. (it was fixed and now become the world's most Yellowish Fenix , that is a long story the course of fixing the light)

1. not a single nitecore light presents that nite ....
2. There wasn't a single headlamp...
3. miss out the 'build our own light' session...
4. the fireflies sighting is a pleasant surprise

---

Added on October 26, 2009, 3:28 pmStrinq, hey, you like chess? use to play, but here no kaki, so many years left already, this could be the best (cheapest) hobby.

Hmm, noticed you said you stay in Seri Kembangan, but home is Klang? You working in UPM??

---

Added on October 26, 2009, 3:44 pmYes, the 47 cap is pikachu (oops, polkiuj? I always pronounce as pikachu).

I am not sure is any McD customer got blinded, but there is one fellow sneak in and take a look at one or two light, luckily he did not run with it.

Nexro, you should come ma, only I bring Jetbeam (RRT 1)
BTW, Nexro, you carry the JET-III M, does it comes with Warm/Neutra White?

This post has been edited by susuman: Oct 26 2009, 03:44 PM

I remembered he told me he bought from http://www.philightsophy.com/ or you can PM him here, his nickname is www.philightsophy or use the link provided by rookiedaddy.

---

Added on October 26, 2009, 11:08 pmErrr, it looks like it really has an overheated burnt mark, it is exactly what happy to me before. But the MCE is ok, since the brown mark is at the side, mine was in the middle, so it has a dark shadow on the hot spot.

But I got it removed now, haha, but too dangerous and it was Q5, it has only 1 dome lens. (I accidentally heat it when I want to heat the paint, and a layer of burnt plastic fell off, and it has no more mark. DON't try it, I was just lucky.)

This post has been edited by susuman: Oct 26 2009, 11:08 PM

Oh, this could be a good start to customised our own light!!!! Get a sample! Yeah! Yeah! My son susu money all gone

ps: have you decided to buy or not to buy the US surefire LX2??

This post has been edited by susuman: Oct 27 2009, 11:16 AM

Changing the flashlight from Q5 to MCE or P& required to change the driver too, due to the fact that MCE and P7 uses 2-3 times more current. Some manufacturer glue the head , so user cannot access the LED (like Fenix); which you need to heat the head to soften the glue, and then open it with either a rubber strap wrench (like this one http://www.tools.com.my/modules/shoppingca...ls.php?id=15175 ), or like me , use anti slip mat (haha))

This post has been edited by susuman: Oct 27 2009, 03:38 PM

I don't have any Tiablo , but I will try search. Usually if it is hidden, then that means the manufacturer glue it. Try look for any part that between the head and the body, does it feel like there is a removable head/part , like the Fenix P3D /PD30 head for comparison.

Group Photo during 1023 Flashaholic Gathering MiniMoke2927's camera



Attached thumbnail(s)

Yeah, any picture to see?

Anyway, ah Bro Newspaper, you really King of Flashaholic (KOF) , collecting flashlight every day!!!! BTW, you count how many flashlight you posses now? I bet count using your hair also not finish
Envy you! KOF

ps: how about the surefire LX2??? if you confirm you let me know ya. Other wise have to order from ebay liao

This post has been edited by susuman: Oct 28 2009, 11:57 AM

Hmm, bad battery huh. Why dell battery so sampah? I took from a 7 years compaq, all cell are good! and recently, 1 dell battery, 3 out of 9 are dead cells too.

Hey KOF, the MrLite actually looks very good to me, may be we should consider harder?

and they customise it to suit us:

Absolutely OEM/DIY Service.
http://www.mrlite.com/company0.asp?bid=116
Our customers can customize the services as followed:

Logo/drawing printing. Example
variety color choice (original color, black, military green)
Output mode. The original output mode are slim light(10%), lowlight(30%), normal light(70%), high light(100%), super light(120%), strobe(100%), low light SOS(30%), high light SOS(100%) ,stand-by(10%). Customers can abnegate the modes they don't like.
Battery. The length and the size of the flashlight can be changed to accommodate different battery. For instance, the battery for PF-15 is 1*18650 battery. Customers can change the battery to 2*AA/2*16340/1*AA or any other batteries they like.
Grade of Water proof. IPX-7, IPX-8, IPX-9 or even higher.
LED choice. Cree, Luxeon and Seoul.
Reflector choice: Orange peel reflect and Smooth reflector
Optional accessories. Gun clip, bicycle clip, bezels, special holster case and etc.

This post has been edited by susuman: Oct 29 2009, 10:32 AM

Bro Walter, there is a clicky for Preon Ti, so is it available or not????? If yes, I would buy the Preon 1 Ti with Clicky!

I am sure you can make it, haha put me in lor, Preon I Ti with clicky (only 1 in the world)

You are the man, again, great 47 dealer in Asia, some said on the earth.

surefire, I am in leh You know I am looking for E1L and LX2 too, haha E1E and E2L just kinda pamper me for a while? Wakakaka.

Individual nick Engraving is great!!

3 brightness mode with strobe/sos ok, but prefer memory mode (with saving the mode if not on-off for 2 second, like the solarforce L2), so every time your turn on it is like single more torch, but will not save the strobe/SOS mode , then it is perfect.

Designing the body?, hmm, can, but if we cannot come out if the CNC diagram/files for them, maybe we choose a similar body and then as a minor touch up (avoid infringe of copyright/industrial design issue), I like jetbeam body though.

1x123 or 2x123/18650 is ok with me, but if it is Surefire 6P /P60 compatible then it is more fun, you can use surefire (or other compatible maker's) accessories, drop in , tailcaps , wah, then it will be a perfect light, that I wanted!!!

6P compatible is ++++++++ wah,

but from the picture ah, I cannot see it support P60 drop in, may be just the tailcap that is compatible, not the P60 drop in?? (the head seems like a jetbeam , or fenix, which you cannot access it like a P60 drop in.