AMD® Socket AM3 Unlocking 4th CORE Thread ~, Those Who Have Tried,Please List it HERE
|
|
 Sep 5 2009, 10:12 PM
Return to original view | Post
#21
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.  
|
QUOTE(xixo_12 @ Sep 5 2009, 10:06 PM) it's more on gambling bro.. other than 0922 , it's more on luck abg -pWs- kan ade sbijik yg buleh unlock? dia mau yg unlock   chances for 0925 to have healthy cores are lower i supposed, atleast 0928 got few managed to unlock in here. 0925...  but 0925 @ dual core not so bad, 4.0GHz prime stable w/ 1.392v...  |
|
|
|
|
|
Sep 5 2009, 10:24 PM
Return to original view | Post
#22
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(xixo_12 @ Sep 5 2009, 10:16 PM) dia sudah jual kan? eh, member dah jual ke? lambat lah i nie...  gamble after we know the percentage of fail is high, is like masuk air bunuh diri  but it still hold the word "pay ron95, so use ron95 lor"   0928 still can gamble i think, not 0925 for me... |
|
|
Sep 9 2009, 09:03 AM
Return to original view | Post
#23
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
.cet files are meant to be flashed by t-series bios update (from d cd) only, flashin it w/ f12 or afudos is as gud as sendin ya board for rma (diff version of agesa iirc).
 from d lesson i've learnt, i dare not to flash any bios usin afudos/f12, even those official bioses are better off flash w/ t-series bios update. what's ya batch btw?  This post has been edited by ah_khoo: Sep 9 2009, 09:06 AM |
|
|
Sep 9 2009, 01:31 PM
Return to original view | Post
#24
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Sep 9 2009, 10:36 AM) Gaygaybyte no problem ah bro.. Biostar aje yg problemo updating bios nowadays.. conclusion is, use t-series bios update for all bios will do, not so complicated.  cam promote gaygaybite je...  but seriously, i'll take gaygay over asus anytime due to bios vendor (IF d overclockability is about d same).  |
|
|
Sep 9 2009, 10:54 PM
Return to original view | Post
#25
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(yuanbao @ Sep 9 2009, 07:15 PM) @_@ failure in core unlockin most probably caused by it's user/chip problem. most if not all biostar 790gx boards can do unlockin + run d unlocked core(s) stably since d earlier day when some premium brands failed to do so. only recently we can see asus/dfi release stable bios for core unlockin... seem liek biostar board is causing alot problems.. =.=" lucky that day i go ASUS..(i did facing some problems oso..will auto restart but flashing asus new 14/8/09 bios = ok liao hehe..)  QUOTE(-pWs- @ Sep 9 2009, 07:19 PM) Should not be the board issue. exactly bro... It is processor cannot be unlocked. -pWs- This post has been edited by ah_khoo: Sep 9 2009, 11:00 PM |
|
|
Sep 10 2009, 09:25 PM
Return to original view | Post
#26
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Sep 10 2009, 09:21 PM) Highest I sell is 385. If good, 400 should not be a problem. yas was d best bro... it's a pity that u sold it away... else we can see more records (local) broken... by usin a biostar board ONLY... -pWs- gettin d chip by this weekend... hopefully there'll be positive result. This post has been edited by ah_khoo: Sep 10 2009, 09:27 PM |
|
|
|
|
|
Sep 17 2009, 03:27 PM
Return to original view | Post
#27
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(ChaSm @ Sep 17 2009, 02:57 PM) How do u unlock only 3 cores?? Is that a biostar only function? as long as there's a down core option in bios (which i'm sure all boards which can do core unlockin have) will do. QUOTE(-pWs- @ Sep 17 2009, 03:00 PM) Asus only so far IIANM. force 3 core in down core option will do bro, asus is more advance coz their bios let users to chose which core to disable. eg if 3 cores there're options of:DFI seems can. But dunno. -pWs- 1> Core 0, 1 & 2 2> Core 0, 1 & 3 3> Core 1, 2 & 3 i mite be wrong thou, but d logic is something similar i guess... |
|
|
Sep 17 2009, 05:44 PM
Return to original view | Post
#28
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Sep 17 2009, 05:31 PM) there is no downgrade in bios leh.. guess u never use asus board eh bro? they're abit diff when it comes to bios update. sometimes once u update to newer one u can't revert back to older version unless u use special flasher which can do d overwrite. i mite be wrong thou... u can revert back to the older bios...just dload the bios and flash like usual... easy..y want to revert back?  |
|
|
Sep 18 2009, 10:47 AM
Return to original view | Post
#29
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(antonio @ Sep 17 2009, 07:52 PM) saya merayu untuk berlainan.... my bad sir, d last time i used an asus board was back in p35 days, 2 years ago iirc. In the Asus Update (bios update program) you can have the option to downgrade to older bios via checkbox in the settings panel.... QUOTE(ChaSm @ Sep 18 2009, 09:22 AM) I'm using MSI770-C45.. Is it just me or does this mobo not have a down core option? Anyone care to advise?? what is d symptom after acc or whatever core unlockin feature called by msi enabled? Btw, i'm using 0925CPMW.. or was it APMW.. sigh.. no luck. .  This post has been edited by ah_khoo: Sep 18 2009, 12:01 PM |
|
|
Sep 18 2009, 10:58 AM
Return to original view | Post
#30
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(ChaSm @ Sep 18 2009, 10:56 AM) EC Firmware => Special; then if that's d case most likely d locked cores are crippled. ACC => Auto After that, the comp doesn't POST.. Gotta reset CMOS...  |
|
|
Sep 18 2009, 05:03 PM
Return to original view | Post
#31
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(ChaSm @ Sep 18 2009, 03:02 PM) Mmmm.. optimized? How do you do that? best way to find out is to test it on another board like biostar or asus or gigabyte which is d best (imo) in core unlockin. Anyways, i've updated my BIOS using the one from xtremesystems.org.. It's the latest but no luck.. Unfortunately, i think it's the chip.. sigh.. Though, i might still be able to unlock 3rd core? Still can't find any option to downcore.. Help anyone? can take a snap on what's d option available under advance setting? an advance wish of Hari Raya to all d muslims bro here.  have a safe journey on d road, don't oc d engine of ya bike/car... my raya wish is to have bro gaban & abg sepul to be active again in this thread... |
|
|
Sep 18 2009, 05:28 PM
Return to original view | Post
#32
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
try acc @ -4% for all core as mentioned by sis xixo, can try ht link @ 1600MHz too. another shot of cpu specifications mite help.
msi bios naming failed. where got d fsb term for amd nowadays... |
|
|
Sep 18 2009, 05:51 PM
Return to original view | Post
#33
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(ChaSm @ Sep 18 2009, 05:45 PM) No more FSB term then use what wor? fsb to be replaced by htt. I'll try that out as soon as I get off work.. thanks all the sifus!! CPU specs? Ermm... no screenshot but:- CPU: 550BE MB: MSI 770-C45 Ram : KVR 1333 DDR3 4GB GC: ATI 4870 PSU: Xigmatek 550 HDD: 800GB Caviar Green OT: If i OC by increasing FSB, my DRAM frequency goes up along with it.. Is that bad? I mean, will it cause any system unstability? cpu-specification as in d one shown in bios, not ya pc specification. |
|
|
|
|
|
Sep 18 2009, 06:07 PM
Return to original view | Post
#34
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(ChaSm @ Sep 18 2009, 05:55 PM) CPU multiplier or Ram multiplier?? increase in htt will lead to increase in ram freq. what sis xixo meant was increase d cpu multi to eliminate d possibility of ram causin instability.  confused.. hahahah.. sorry..Mmm... and how do u approach the pulling out of capasitor?? Cna you make a video of it using your mobo??? |
|
|
Sep 25 2009, 03:29 PM
Return to original view | Post
#35
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
when it comes to core unlockin, i think gigabyte is d best. no offence to a$u$ fans.
 |
|
|
Sep 30 2009, 12:54 PM
Return to original view | Post
#36
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(duncan880409 @ Sep 30 2009, 12:51 PM) anyone please help, TA790GX-A3+ with 0922CPMW batch, unlock succcess, sometime can boot sometime cant.. mb show abnormal condition at phase LED acc value? bios version? ram model? ram timing? ram divider used? |
|
|
Sep 30 2009, 01:02 PM
Return to original view | Post
#37
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(duncan880409 @ Sep 30 2009, 12:56 PM) acc value? -2%?? 1. acc value is ok, recommended is -4% for all cores if ur lazy to play around for each core.bios version not sure... wait i have a look but if windows (HDD) from intel G33 platform take to here, will BSOD ka?? and TA790GX-A3+ cannot boot from CD?? RAM currently is kingston 1333 valueram 2Gb i lend from friend 2. most likely will, or u can go into safe mode & uninstall d intel chipset driver, but i prefer clean format for switch of platform. 3. who say our board can't boot from cd? try to set d boot sequence & priority properly This post has been edited by ah_khoo: Sep 30 2009, 01:03 PM |
|
|
Sep 30 2009, 05:58 PM
Return to original view | Post
#38
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(duncan880409 @ Sep 30 2009, 05:52 PM) ok, now i dont know is even worst or what.. all these tried w/ 4 cores or 2? if 2 cores oso like that then probably u got a bad board then. my 1st board died becoz of memory error too. 1)now i can format until 20% (formatting) than hang, i dont know why.. 2)i try to format in another computer with windows, normal format(right click and click format only), then i put back and choose leave the default file system ... (i got NTFS file system).. but guess what, hang at 46%.. 3)i try another CD, this time i use my ahem version(for testing), number 1&2 is using ori cd...but still hang, hang at 0% when just start copy.. i use this CD to try step 1 also hang at 20% (formatting) i also relize that my mobo, sudden got cannot boot with abnormal(2LED off) or (memory error) 1 LED on 1 off BIOS version 08.00.14 Added on September 30, 2009, 5:53 pmoh ya, forget, i got reset CMOS before... anything to do with that? |
|
|
Sep 30 2009, 06:10 PM
Return to original view | Post
#39
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(duncan880409 @ Sep 30 2009, 05:59 PM) wtf.. 2 core and 4 core tried already... do try w/ another pair of ram, if still same problem most likely bad board. c'mon, one rma wont hurt one... if within 7 days then u should be eligible for one-to-one exchange. bad board?? sent RMA how long...zzz i gona sell this board already, this is my 2nd biostar board RMA already.. P4M900 and this one... zzzz any other board to recommend? QUOTE 1 more thing 1 to ask.. i when open the new processor i never realized, but after i fix in the heatsink everything i open back, i saw the 4 side got kemek abit, is it normal one?? it come already like this? what is d thing that kemek? if ur referrin to pin then u can kiss ya chip gud bye... This post has been edited by ah_khoo: Sep 30 2009, 06:11 PM |
|
|
Sep 30 2009, 10:13 PM
Return to original view | Post
#40
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(duncan880409 @ Sep 30 2009, 06:11 PM) i dont think is ram problem lo.. now the ram actually is new 1... i pinjam from the dealer as my XMS3 haven't come... and i board this board on 8/9/09 haiz... i wait the memory almost a month and still haven't come if no one to one exchange then too bad. ur in jb rite? iirc alphamatic got branch there. do try ya luck. if they got stock, should be able to do one to one exchange. Added on September 30, 2009, 6:23 pmoh yea, forget to ask, HT rate is put 1.6Ghz rite after unlock?? Added on September 30, 2009, 6:25 pm not pin, is the metal above, the plate that write batch or bla bla bla.. the 4 side of the plate.. kemek down 1 yup, to unlock, u gotta put ht multiplier @ 8x a.k.a 1600. QUOTE(wen9x88 @ Sep 30 2009, 09:41 PM) msi 770-c45 cannot set the fan to auto adjust ? stock fan is as gud as nothing if u wanna unlock + oc. get a 3rd party cooler. cheap one like cm hyper 212+ will do d job, if want cheaper, go for tx3. the 550be fast so noisy. |
| Change to: |  0.0414sec
 0.49
 7 queries
 GZIP Disabled
Time is now: 3rd December 2025 - 10:54 AM |
Quote