Outline ·
[ Standard ] ·
Linear+
AMD® Socket AM2&AM3 Overclocking V19, There's still few beasts hiding...
|
xcen
|
 Jul 15 2009, 02:53 PM
|
|
QUOTE(kuntawakaw @ Jul 15 2009, 10:40 AM) as my prediction... i will be the last man here to stay at ddr2..or mebbe ventrilocks the last.. @cloudwan..where to set the ht and nb volt at ta790gx 128? cant find it.. but i did saw the volt at bios HW health tab See who can tahan longer haha. I'm still using DDR2 and I'm lazy to change to 770-C45. Btw, what's the main advantages of 790GXE and 790GX 128M? |
|
|
|
|
|
xcen
|
Jul 15 2009, 09:59 PM
|
|
|
QUOTE(kuntawakaw @ Jul 15 2009, 05:53 PM) just notice my proc idling at 25c i think its sensors issue.. but now im priming..then i touch tip of my finger at a proc..that not being covered by the cooler base, and its cool... priming showing 38c..shud i trust it? prime at stock...demm.. now i just notice my temp sensor phailed I think it is quite normal as Phenom II proc are quite cool. My proc idles at around 27C. |
|
|
|
|
|
xcen
|
Jul 15 2009, 10:27 PM
|
|
|
I'm just using air cooling CM Hyper TX-2 lol.
My overclock is just mild OC, 3.2GHz, with just 0.025vcore increase for better stability.
I don't think it's any issue with our board, for me it's quite normal. When stressed it will go up to 41-43C.
This post has been edited by xcen: Jul 15 2009, 10:28 PM
|
|
|
|
|
|
xcen
|
Jul 16 2009, 12:12 AM
|
|
|
If I were to get a heatsink... Xigmatek Dark Knight vs Core Contact Freezer CCF has a little bit better performance but Dark Knight looks too sexay..  |
|
|
|
|
|
xcen
|
Jul 16 2009, 07:37 PM
|
|
|
QUOTE(momuchi @ Jul 16 2009, 07:23 PM) TA790GX 128M with new beta bios 78DEA715, can unlocked 0915FPMW and pass 2000MHZ HTT. this bios also detect X2 550BE.. Wow!!!! I will grab this once it is confirmed stable! |
|
|
|
|
|
xcen
|
Jul 16 2009, 08:04 PM
|
|
|
QUOTE(ventrilocks @ Jul 16 2009, 07:45 PM) nice bro..i tot 0915 cant be unlock..u r the best!  Bobiac's proc is 0915 I thought? |
|
|
|
|
|
xcen
|
Jul 16 2009, 10:32 PM
|
|
|
QUOTE(kuntawakaw @ Jul 16 2009, 09:43 PM) sure ppl will beat mine la.. look at their board..look at their cooler...look at the vcore they able to push for me 3.8ghz at 1.392vcore is consider good edi for my personal record... hard to make it stable at that vcore u know...few attempts fail.. so that is the max..no more update from me and also no more daily update on ur thread edi..u may rest in peace 4 core @ 3.8? This is what I call pro  |
|
|
|
|
|
xcen
|
Jul 16 2009, 10:39 PM
|
|
|
QUOTE(kuntawakaw @ Jul 16 2009, 10:34 PM) x4 3.8 @1.392vcore? u gila ka.. hahaha its x2 la... x4 afraid to do any prime stable test..my mosfets is burning.. so better aim for x2 1st...later dont have things to play edi..huuu Ohhh!! If X4 I will go and kidnap your proc haha  |
|
|
|
|
|
xcen
|
Jul 17 2009, 11:03 PM
|
|
|
QUOTE(syazone @ Jul 17 2009, 10:53 PM) i bought ta790gx 128m edi, but kinda confuse how to oc... quite diff from intel, last time using amd was during barton  If your processor is black editon, just go to T Series Tab, Manual Overclock, CPU/FID Control, then just increase the multiplier. |
|
|
|
|
|
xcen
|
Jul 18 2009, 01:07 PM
|
|
|
QUOTE(bobiac @ Jul 18 2009, 11:52 AM) haha. wait2 now oni 3.7 X4 hehe. later i potong u hehe. Using WC or Air Cooling or LN2?  |
|
|
|
|
|
xcen
|
Jul 18 2009, 01:13 PM
|
|
|
QUOTE(bobiac @ Jul 18 2009, 01:10 PM) wc oni la bro hehe. LN2 no money. Nice proc you have there |
|
|
|
|
|
xcen
|
Jul 19 2009, 10:27 PM
|
|
|
What's the use of the molex for the graphic card? The motherboard claims it is to stabilize the graphic card and for extra performance? Is that true?
It is rare to hear of molex for graphic card...
|
|
|
|
|
|
xcen
|
Jul 21 2009, 11:52 PM
|
|
|
Regors are impossible to be unlocked because they're native dual cores.
|
|
|
|
|
|
xcen
|
Jul 24 2009, 08:46 PM
|
|
|
Has anyone tried XP Mode on M4A mainboard?
Initially wanted to buy M4A but seen somewhere stated that it doesn't support XP Mode.
|
|
|
|
|
|
xcen
|
Jul 25 2009, 06:31 PM
|
|
|
Don't buy Acer laptop le... me and a few of my friends had so many problems with it before.
For budget, I would go for Compaq over Acer anytime, anywhere.
|
|
|
|
|
|
xcen
|
Jul 27 2009, 10:35 PM
|
|
|
QUOTE(cloudwan @ Jul 27 2009, 10:31 PM) @ah_khoo » Click to show Spoiler - click again to hide... « Off topic here, what skin u are using for ur vista meh? I never knew vista can use skinning like XP.. Got any link on how to do it? TQ bro  Use WindowBlinds only lor... Easiest way, but more expensive unless you do the *ehm* method la. The free one would be to use UXTheme, almost the same as Windows XP wan la... |
|
|
|
|
|
xcen
|
Jul 28 2009, 10:53 PM
|
|
|
QUOTE(AMDAthlon @ Jul 28 2009, 10:45 PM) Anyway guys..is there any difference by turning on ACC(For non-unlocking purposes)?Does it help in overclocking?(Not for Phenom I) Nope, it helps in Phenom but almost has no effect on Phenom II. I saw this discussion in the previous thread. |
|
|
|
|
|
xcen
|
Jul 29 2009, 07:00 PM
|
|
|
QUOTE(yvliew @ Jul 29 2009, 06:17 PM) going for 3.12Ghz now... HT LINK on 1920mhz, ram speed now is 400mhz.. edit : 40min no error can consider stable??? Stable as in no problem with daily applications - yes. Most of the time your PC won't stress to 100% like Prime. But it's still better to Prime it for an hour or more so that you're more assured, feel safer ma haha. |
|
|
|
|
|
xcen
|
Jul 29 2009, 08:23 PM
|
|
|
QUOTE(yvliew @ Jul 29 2009, 07:30 PM) I've seens somewhere saying that after OC, cool & quiet won't work? Mine seems to be working, lowest 240x4, idle temp 28c Most of the time it works on newer motherboards, don't worry about it. |
|
|
|
|
|
xcen
|
Jul 31 2009, 01:53 PM
|
|
|
Damn.. The MSI board is a beauty! Nice colour combination!
To all of you who are using 64bit Windows, any problem with finding softwares?
|
|
|
|
|
Quote
0.0526sec
1.69
7 queries
GZIP Disabled