Ok...
I assume these settings is your PC k....
CPU Multi : 14x
CPU VID : 1.4v
Mem VDIMM 1.9v
CPU/NB : 1.1v
HTT: 1.2v
NB : 1.3v
SB : 1.2v
Ram : DDR800
Ram Timing : 5-5-5-12@DDR800
HT Multi : 1800Mhz
CPU/NB : 1800
HTT : 200
PCIE : 100
With the above: THERE IS ALMOST 0.000000000000000000000000000001% that you are going to be unstable.....
So lets overclock:
CPU Multi : 12x (Drop to ensure CPU Final frequency isn't too high)
CPU VID : 1.4v (Bumped voltage value)
Mem VDIMM 1.9v (+0.1v, dun worry about overvoltage with that amount of increment)
CPU/NB : 1.1v (since your just around 2040 frequency, you can leave it to 1.1v, unless you want to go 2400 and above, u need to bump around 0.1v or 0.2v to make it stable)
HTT: 1.2v (more than 225, just bump 0.1v making a total of 1.3v)
NB : 1.3v (usually doesnt make any diff, so leave it)
SB : 1.2v (again doesn't really have any effect, so leave it stock and save electricity (green green green))
Ram : DDR667 (from 800 drop to 667 multiplier
Ram Timing : 5-5-5-12@DDR667 (5-5-5-12@DDR727) 727 will be the speed after HTT 220...
HT Multi : 2040Mhz (when 220 HTT)
CPU/NB Frequency: 2040Mhz (when 220 HTT)
HTT : 220
PCIE : 100
