its running single channel bro..the vdimm is i set auto (1.6v in windows) and also 1.66 (1.62v windows / 1.618v at post)both get same result..
u tell me 1st how to rid from the DQS thing..
then ill tell u what ram...

and i cant post ss..using frens lappy..my wireless adapter is crap..poorly Rxed..



later will post ss..

---

Added on August 10, 2009, 2:08 pmantonio..u shocked..how about me? dead edi seeing ur vdimm...
in ddr2...even 2.2 is no no for me...
waaaaaa...im amaze to see the ram still working.\

u wanting the ram to die or what?

This post has been edited by kuntawakaw: Aug 10 2009, 02:08 PM

as promised..

is memtest will stress ram also? to the fullest?

so da na...
last night ran until 200%..no prob...
so i can conclude that my ran quite stable...

now time to borrow some money to buy another stick..

demm...OC is really take my money away...

@babyyi..

is that so? how much now? i need another stick..but i have no money loh...demm... if increase rm10..i dont care much....

anyone...can tell me what is the DQS thing? bootblock?

@yvliew
i observe both..but most of the time only cpu temp...(they will not much differ...)
if u using AOD...it starts with tmpin1... is using HW monitor. it starts with 0

so AOD-tmpin1 = HWmonitor-tmpin0

@yvliew..
diff board have diff tmpin# for cpu temp
eg... biostar ta790gx 128 /a3+ using tmpin2..
MSI 770 c45 using tmpin1...

i just see the same temp as ACPI>THRM temp... (HW monitor)
or just do some experiment..prime ant which one increase fastest..

@makky...
both if u have good cooler...

(i kindda kompius what u want to ask..isit between HTT and multi?)

@makky..
i think 955 need add vcore in order to get 3.6ghz..am i right verdict?

u have to determine urself..not ask others since u are the one that do the OC..so ur the only that can feel it
if u using multi, the n 3.6ghz...but not stable..how? still need to increase vcore... no point u OC but not stable...

and bios will be better...but AOD more user frenly...
bios is better but sometimes AOD is my choice. (like change ram timing to seek which combo is best)

just plug in the proc.. if no prob occur, no need flash bios..
ol mobo not sure can use USB or not..huuuu..manuals? (i wonder now still have ppl using floppy a)
my 61s havnt flsh bios.still rock till now..

wah..poison mode on...

ah_khoo...
that green utility GPU not working when i run my rig with lowest vcore i cud...
once open GPU...all hang... reset CMOS not working..take out batry...
then i tot OS crash.. (no windws DVD...so install hachintosh...but failed) and luckily after taking a nap, can boot again...

i tot can even save more electricity...

@ah_khoo..

yes and yes...
so after i sense it not working with my daily setting
i just uninstalled it

it works fine with all stock setting... (havent tried with OC-abit-only setting)

my tracer also generate vast amount of heat compared to KVR
even 1.8vdimm (surely 1066mhz) the heat is

@shikimori..
what batch is that? if 3.8ghz...how much vcore? for atleast 1hr prime stble?
3.7 on stock vcore...great.. i have in mind that 955 somehow need increase vcore to 3.6ghz

where to get it?
any lucky batch to be obtain a? fuhh... feels like getting one leh... bored edi play with same chip..

3.6ghz on stock cooler.... temp?

anyone here planing to get 965? verdict?
its sooo easy to reach 4ghz la...fuhh...
4.2ghz can be obrtain with attractive vcore...+air cooling...

dush...

u pnjam kawan xixo...

skang ni men tenet + word..single core enough (tp maw x2 )..but mos impoten, bored edi playing with this chip... already know the max and min and..so when bored, cant do anything.
tggu loan lpas, if not..

tmpin0 =system temp ( i donno what temp is that..but my mobo have that)
tmpin1 = proc temp
tmpin2= donno... i think its NB..but my NB never have such a big variation.. (donno if using onbod GC) mosfet ke... ape ke..nth

and dont trust me with this.. im very sure about tmpin1 only..another 2 agak2 saja.. u can do some experiment tho.. like pull ur NB heatsink for 1,2 sec and see if the temp goes up like hell (i did this before )
bosan..saje maw post...

wah..this is the poison cdlim was talking about..dayum..must resist

@syazone...
put CL3 joke2

add some value to ACC perhaps? phenomI really loves ACC...

make it +12% !!!!

ah_khoo.. the wattage on GPU changes or not if u lower down the vcore?

now i run my proc at 1.104.. when change 2 notch lower, i see the GPU watt valu is the same ( i only see it thru bios.. not using the GPU software) its 17w

i removed my GC edi..go for green..
_______________________________________________________________________________________________________________________________________

fogot... ah_khoo sure bz tweaking its CIIIF right tired 2day right ? hehehe

so i also dedicate this question to the green king xixo...

thinking to run lower clock la... like 2.5Ghz ke... words dgn LYN je pun

This post has been edited by kuntawakaw: Aug 16 2009, 12:29 AM

oic.. so in theory it will consume less.. but the GPU thing show no sign of it... let it be..or mebbe the drop is toooo small to be make W drop

i donno y got review said it better then megahalem & true.. that is something i find it hard to be accepted.
mebbe been paid.
take a look here
1 rank below the xig.. but no where to beat those 2 monsters...
morning2... can i have a peek to ur CPUZ... u get 4ghz then show it to verdict...hehehehe

going all green.. gpu failed even at stock clock but lower volt...
it did start and run for at least 30secs.
i can see my proc run at 12W

abang.. u dare to put 1.5v on that cute lil board? and priming?
thats a tru OCer ya...

huuuu.. naise2.. u making me jeles a....