orthos priority 10 stress moar then prime i guess...
but in my case now.. orthos can stand few mins since it only stress 2cores..hehee while prime stress all.

my #2 and #4 ramslot cant work..if put ram into it, system wont boot.at all..
my bad..i can only run in single channel.
flash bios doesnt help..need to reflash since new bios cant unlock..hmmm

i beg to differ, i don't really set priority even back to d gud old days when i use orthos...

d fail to boot issue is not hardware releated, more on acpi thingy. faced that when i first get my 790gxe 128m as well. put 1 stick of ram, boot w/ vista/xp, do a repair & shutdown. install another stick then boot again... it worked for me, hopefully same for u...



source HERE

This post has been edited by ah_khoo: Jul 3 2009, 10:57 AM

but from my own exp..while using the 4000+ x2... if use prime.. still can do surfing or other thing with no lag..and if orthos priority 10..even to open an explorer will be troublesome..and with same unstable setting..prime only "stop" but orthos turned my pc to freeze,hang crash...
my own experience la... hehe

if that's d case u can use task manager to set d priority of p95 as well... orthos is no doubt better in gui, but p95 is d one i trust. check d possible solution to ya no boot w stciks issue...

actually i will use prime or othos 10 when wan to check the stablility fast... means i will run at most 30mins.. if want to run for long hrs..will use orthos with lower priority...huhuh

but now since i use a quad...have to stick on prime la..easier to use compared to occt.. thanks ah khoo..and


anyone?

U sure it's ur ram slot? Did u test ur ram one by one with memtest??

yep..tried one by one.. 1 ram will not boot when inserted in #2 and #4 and i tried with both ram..haish..i lost my dual channel ability.. want to rma

actually this indeed happend with my kvr+aeneon ram... but when change to tracer..the prob just flush away (and i tot the former ram was faulty..but the buyer din complain anything) but the fact is my mobo gone faulty..haish...

Aisey RMA bro?? Then ur gonna be moboless for how long
Ker ada planning mau angkat mobo lain nih?

wakakka... duet mana maw carik?
mebbe will send in 2 3 months..now no money and pc is critical for me..
nvm la.. i thinking of stacking all 2gb kit and 4gb kit to make it 6gb..but will sell off 2gb kit since my mobo cant accept.

sb600 = no acc = no free unlocked core(s)... think twice...

Kunta..I suggest you stay on ur mobo..3.8Ghz@4Cores..it is so satisfying..u paid lesser got X4 edy..Think again

Dual Channel performance gain not say very a lot also lol.

hey, anyone can help me? my superpi mod cannot run ...even at 16k..i just overclocked it to 3.4Ghz (17x200) with 0.05v higher than CPU VCore..
tested with 2 hours of Prime95 smallFFT...any solution?

but need to rma this board... btw im a noob in dfi..
i tot its the FXB M2RSH..hehehe... DFI DFI
and i guess i can only obtain 3.7ghz x4 la with this board.. and something amuse me.. i run @ x2 and X4..they vcore needed is the same... like unlocking the other no need to pump additional vcore.. i tot i can gain more with x2 compared to x4 with the same vcore..but it is not... hehehe.. 1.45vcore not stable at x4 3.9ghz..and also not stable for x2 3.9ghz

blend test ok? could be ram issue. small fft stresses cpu only...

erm...i disabled vista Aero...and it works...T_T

btw, for blend test, i dont know how much memory to put in use...


This post has been edited by atleeyoung: Jul 3 2009, 12:20 PM

Bro, your processor and motherboard can unlock 4th core using ACC?

Blend test just leave everything at stock ah that's whut i do when i do it

hahahaa..i tried a few times with the old bios, cant seem to work..
but i will try again by boosting the cpu vcore by .05v .

His cpu batch isn't the unlockable batch ah, he tried few times already